Tech / General EngineIs your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
I have a 1987 350 gta tpi n I was wondering if I can slap the zz4 heads on the tpi block running the stock tpi setup if so what would I have to do or change
bolt them on bro! the only problem i know of is bolt holes in the center of the intake need to be elongated a bit since the holes on the alum heads are the same as 86 and older heads whereas your intake is for the 87 and newer style not a big deal..... perfect time for a Stealthram
Already!!!!!!!! Sounds great thanks......
Well I was wondering will the ecm have to be chipped or messed with?
And are self adjusting rollers rockers a good idea for this head
