endo666

I am building a 350 to drop into my camaro.

I have a block which i will either hone and keep the boars stock or i will go .020 or .030 over.

I also have heads for my 350 build
casting # 3927186
intake 2.02" exhaust 1.6" chamber CC 63.305
a little porting done to them.
stainless 2.02 in manley intake valves
metal viton seals
3/8 rocker stud
magnaflux by the shop that did the work


Now for my cam question. I have been checking CL because you never know what someone could be selling.

the cam is This one

Comp cam Grind# 268H
Intake 268 exhaust 268
RPM Range 1500 to 5500


Heads

five7kid

iTrader: (14)

Good cam.

Any idea what intake gasket they used to port match the heads?

endo666

No clue on the gasket. it was ported when the guy i bought them from bought them.

Will that cam be good for 300+ hp.

He is wanting $150 for the cam new, lifters new, stock oil pump new, double roller gears and chain new, and some msc gaskets.

endo666

so i was talking to my step dad and he said that this cam which i bought will not get me to my 300+ HP goal. what do you guys think.

RED86Z28

That cam will make 300 + hp easy.

endo666

sounds good i guess i will give it a try and hope for the best.