Cam and head upgrade
09-28-2011, 05:47 PM
#1
Junior Member
Thread Starter
Join Date: Sep 2011
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Cam and head upgrade
Thinking about upgrading my top end since i have a blown head gasket anyway. I have been doing a lot of research and have ran into an issue that i dont know what to do about. I have a 1991 Z28 5.7 TPI and people have been telling me i cant do much without having my computer and engine tuned for the upgrades. What can I safely do (Cam and heads) while adding hp without having to mess with the computer and sensors? Any suggestions would be greatly appreciated.
dmay1
dmay1
Last edited by dmay1; 09-28-2011 at 07:13 PM.
09-29-2011, 08:29 PM
#2
Supreme Member
iTrader: (2)
Join Date: May 2009
Location: Delaware
Posts: 3,371
Likes: 0
Received 1 Like
on
1 Post
Car: 91' Firebird SOLD
Engine: 350 TPI +bolt-ons
Transmission: 700r4
Axle/Gears: 3:42
Re: Cam and head upgrade
Thinking about upgrading my top end since i have a blown head gasket anyway. I have been doing a lot of research and have ran into an issue that i dont know what to do about. I have a 1991 Z28 5.7 TPI and people have been telling me i cant do much without having my computer and engine tuned for the upgrades. What can I safely do (Cam and heads) while adding hp without having to mess with the computer and sensors? Any suggestions would be greatly appreciated.
dmay1
dmay1
09-29-2011, 08:43 PM
#3
Member
Join Date: Jul 2010
Location: NJ
Posts: 305
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 GTA flame red
Engine: 5.7 l98 cranes 2032 and chip
Transmission: stage 10 700r4
Axle/Gears: 3.27 axle
Re: Cam and head upgrade
you can do a cranes 2032 which in it own is potent but without a chip you wont get much.
but you can do the intake, exhaust and stuff but you can get a chip made for $150 and get much more out of your mods.
Go look at TBIChips website just to get an idea its simple all you do is fill out an order form or call with the mods you do and heel make a custom chip for you that will work with your mods and get the most out of them
but you can do the intake, exhaust and stuff but you can get a chip made for $150 and get much more out of your mods.
Go look at TBIChips website just to get an idea its simple all you do is fill out an order form or call with the mods you do and heel make a custom chip for you that will work with your mods and get the most out of them
Thread
Thread Starter
Forum
Replies
Last Post
ambainb
Camaros for Sale
11
04-25-2016 09:21 PM
