Tech / General Engine Is your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!

350 tpi HELP!

Thread Tools
 
Search this Thread
 
Old 08-01-2014, 01:20 AM
  #1  
Member
Thread Starter
 
saldav420's Avatar
 
Join Date: Sep 2011
Location: san diego ca.
Posts: 174
Likes: 0
Received 0 Likes on 0 Posts
Car: 86 bronco, 88 iroc
Engine: 351 windsor, 350 tpi
Transmission: 700r
350 tpi HELP!

Why would gas be spitting out of a spark plug cylinder? Car has been runnig good and all of a sudden it stoped and would crank. I started to check each plug and one spelled like gas. I had a buddy crank it and that's when I noticed the spitting of gas. Does anyone know what this could be? Thank you in advance.
Old 08-01-2014, 03:23 AM
  #2  
Junior Member
 
Perf.Kustimz's Avatar
 
Join Date: Jul 2014
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Re: 350 tpi HELP!

Originally Posted by saldav420
Why would gas be spitting out of a spark plug cylinder? Car has been runnig good and all of a sudden it stoped and would crank. I started to check each plug and one spelled like gas. I had a buddy crank it and that's when I noticed the spitting of gas. Does anyone know what this could be? Thank you in advance.
fuel regulator id be guessing. this would also make it harder for the crank to crank over with full solid gasoline in front of the piston....
Old 08-01-2014, 07:26 AM
  #3  
Supreme Member

iTrader: (2)
 
Bob88GTA's Avatar
 
Join Date: Apr 2000
Location: Huntsville AL
Posts: 3,938
Received 97 Likes on 62 Posts
Car: 88GTA
Engine: 5.7TPI
Transmission: Auto
Axle/Gears: 3.27
Re: 350 tpi HELP!

Your injectors are shot. They are leaking down into the cylinders. Check fuel pressure with gauge on schrader valve KOEO, pressure should be around 38-45ish. Turn key off and watch gauge for bleed down. It should hold for a while if not bleeding down. If they are bleeding down, you'll know, the gauge will slowly or quickly drop to near nothing.
You got some testing to do!

Do a search on checking Fuel pressure and injectors here. Tons of info.

Last edited by Bob88GTA; 08-01-2014 at 07:27 AM. Reason: spelling
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
bamaboy0323
Tech / General Engine
25
09-03-2015 06:07 AM
theurge
TPI
7
08-21-2015 12:46 PM
Out-Cast
Tech / General Engine
5
08-17-2015 10:57 AM
Jlanz55
Transmissions and Drivetrain
3
08-17-2015 07:15 AM
bamaboy0323
Tech / General Engine
2
08-15-2015 07:20 AM



Quick Reply: 350 tpi HELP!



All times are GMT -5. The time now is 08:16 AM.