Is my cam too small?
#1
Is my cam too small?
Hey guys. I have a 350 with a Miniram, AFR 195 Eliminator Heads, Hooker 1 3/4" Longtube Headers, 1.6 Roller Rockers, 58 MM Power Products Throttle Body, MSD 6AL2 igntion box, D.U.I. distributor, Corsa true dual 2.5" exhaust with h pipe, and some other small miscellaneous modifications. I also have 3.75s in the rear.
This is a 1985 Corvette.
My current camshaft is TPiS' flat tappet version of the ZZ409 roller cam.
Again this is a FLAT TAPPET camshaft.
The specs of this camshaft are 224*/224*duration @ 0.050", 0.528"/0.528" valve lift with 1.6 roller rockers, and 112* LSA.
I only bring this car up to 6000 RPM MAX.
I personally don't think that the car has as much power as it should. I haven't dynoed it yet.
So this brings me to my next question. Is this a mismatched combination? Is the Miniram shining right as the cam is falling off?
Thanks.
This is a 1985 Corvette.
My current camshaft is TPiS' flat tappet version of the ZZ409 roller cam.
Again this is a FLAT TAPPET camshaft.
The specs of this camshaft are 224*/224*duration @ 0.050", 0.528"/0.528" valve lift with 1.6 roller rockers, and 112* LSA.
I only bring this car up to 6000 RPM MAX.
I personally don't think that the car has as much power as it should. I haven't dynoed it yet.
So this brings me to my next question. Is this a mismatched combination? Is the Miniram shining right as the cam is falling off?
Thanks.
#3
Supreme Member
iTrader: (1)
Join Date: Aug 2007
Location: Bright, IN
Posts: 1,390
Likes: 0
Received 0 Likes
on
0 Posts
Car: '86 Bird, 96 ImpalaSS, 98 C1500XCab
Engine: LG4, LT1, L31
Transmission: 700R4, 4L60E, 4L60E
Axle/Gears: 3.73 Tors, 4.88 spool, 3.73 Eaton
Re: Is my cam too small?
No, for 6000 RPM max, it's definitely not too small.
Thread
Thread Starter
Forum
Replies
Last Post
junkcltr
Tech / General Engine
6
08-02-2019 11:12 PM
ambainb
Camaros for Sale
11
04-25-2016 09:21 PM
Mickeyruder
Engine/Drivetrain/Suspension Parts for Sale
3
09-02-2015 02:45 PM