Firing order for Distributor Cap/wires
#1
Junior Member
Thread Starter
Join Date: Sep 2014
Location: Langley, BC Canada
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Firebird
Engine: 5.0L
Firing order for Distributor Cap/wires
My friend that was helping me do some engine work decided to pull the wires off the cap before I could number them all.... 1988 firebird 5.0L
Thanks in advance.
Thanks in advance.
#4
Moderator
Join Date: Jul 1999
Location: 51°N 114°W, 3500'
Posts: 17,107
Likes: 0
Received 120 Likes
on
101 Posts
Car: 87 IROC L98
Engine: 588 Alcohol BBC
Transmission: Powerglide
Axle/Gears: Ford 9"/31 spline spool/4.86
Re: Firing order for Distributor Cap/wires
#1 is usually in the 5 o'clock position when looking at the cap from the front. Rotation is clockwise
#5
Senior Member
iTrader: (5)
Join Date: Jan 2009
Location: Golden, CO
Posts: 887
Likes: 0
Received 11 Likes
on
9 Posts
Car: 87 IROC
Engine: L31 350
Transmission: T56
Axle/Gears: 4.10 D44
Re: Firing order for Distributor Cap/wires
@Oxygen454 - #1 could be anywhere. It depends on what else you and any Previous Owners have done, whether that rule of thumb still applies.
Rotate the balancer mark to TDC. The distributor is pointing at either #1 or #6. You can search on how to determine which one.
#6
Junior Member
Thread Starter
Join Date: Sep 2014
Location: Langley, BC Canada
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Firebird
Engine: 5.0L
Re: Firing order for Distributor Cap/wires
Luckily when I numbered the first 4 wires with tape near the cap, I took a picture. So I shouldn't have a problem now that I have the firing order. Thanks!
Thread
Thread Starter
Forum
Replies
Last Post
Hotrodboba400
Firebirds for Sale
3
12-10-2019 07:07 PM