Search



Go Back   Third Generation F-Body Message Boards > Racing Boards > Theoretical and Street Racing
Sign in using an external account
Register Forgot Password?

Theoretical and Street Racing Use this board to ask questions about street racing, discuss your street races, and "who would win?" questions. Keep it safe.

Welcome to ThirdGen.org!
Welcome to ThirdGen.org.

You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!


Reply
 
Thread Tools Search this Thread
Old 05-31-2010, 02:29 PM   #1
Junior Member
 
Join Date: Jan 2010
Posts: 46
Car: 1991 Firebird
Engine: 305 TBI
Axle/Gears: 2.73s

Classifieds Rating: (0)
How much horsepower/torque to run a high 13? auto tranny

How much horsepower and or torque does it require for a 3rd gen to run a high 13 in the quarter mile. Im looking for a general answer because obviously there are many factors.

Basically whats the least you could get by with a 13 in 1/4 with an automatic transmission? With some good Gears if you must
wammac is offline vBGarage Page   Reply With Quote
Old 05-31-2010, 03:24 PM   #2
Senior Member
 
Manic Z's Avatar
 
Join Date: Oct 2002
Location: Hamilton Ontario Canada
Posts: 600
Car: 1985 Camaro IROC-Z
Engine: 350 bored and stroked
Transmission: T-5
Axle/Gears: 3.73 posi 10 bolt

Classifieds Rating: (1)

Re: How much horsepower/torque to run a high 13? auto tranny

I would guess probably about 300 horsepower or so. And maybe 3.55 gears with an auto would be a good choice.
__________________
PLAY HARD OR DON'T PLAY! Modified ZZ4 conversion kit - 425 hp
Manic Z is offline vBGarage Page   Reply With Quote
Old 05-31-2010, 03:49 PM   #3
Senior Member
 
MTXaudioSYSTM's Avatar
 
Join Date: Jan 2009
Location: Port Charlotte
Posts: 357
Car: 90 formula
Transmission: auto

Classifieds Rating: (0)
Send a message via AIM to MTXaudioSYSTM
Re: How much horsepower/torque to run a high 13? auto tranny

not about the power its about mostly the performance of your vehicle. my buddys 01 gt with 97 markv swap pushes just 287 rwhp and runs high 12s all motor
__________________

MTXaudioSYSTM is offline vBGarage Page   Reply With Quote
Old 05-31-2010, 04:10 PM   #4
Junior Member
 
Join Date: Jan 2010
Posts: 46
Car: 1991 Firebird
Engine: 305 TBI
Axle/Gears: 2.73s

Classifieds Rating: (0)
Re: How much horsepower/torque to run a high 13? auto tranny

Quote:
Originally Posted by MTXaudioSYSTM View Post
not about the power its about mostly the performance of your vehicle. my buddys 01 gt with 97 markv swap pushes just 287 rwhp and runs high 12s all motor
Thats why i was asking in general... for the 3rd gen what power am i looking to put out in order to run 13s w/ a small block if i must say that and without having a bunch of weight mods. Stock Weight w/ gears auto tranny and v8 what am i looking at. 300 sounds like what i was looking for .

is that gt auto or stick?
wammac is offline vBGarage Page   Reply With Quote
Old 06-01-2010, 11:48 AM   #5
Supreme Member
 
zraffz's Avatar
 
Join Date: Mar 2009
Location: Sussex County, NJ
Posts: 1,243
Car: 1969 Camaro
Engine: 383/TC78
Transmission: TH400

Classifieds Rating: (0)
Re: How much horsepower/torque to run a high 13? auto tranny

I bet right around 285-290 horses can put a thirdgen into the high 13's.
zraffz is offline vBGarage Page   Reply With Quote
Old 06-01-2010, 12:24 PM   #6
Supreme Member
 
Orr89RocZ's Avatar
 
Join Date: Sep 2003
Location: Pittsburgh PA
Posts: 19,526
Car: 89 Iroc-z
Engine: Twin Turbo 401
Transmission: TH400
Axle/Gears: 4th gen 12 bolt 3.42

Classifieds Rating: (20)

Send a message via AIM to Orr89RocZ
Re: How much horsepower/torque to run a high 13? auto tranny

L98 350 with headers/catback/air intake mods and mild converter should do it on street tires alone regardless of gear. I went 13.89 on street tires with 2800 stall and those exhaust mods with 2.77 gear. Iroc with full leather/power everything interior. No weight reduction.

With few more bolt ons, 254whp and slicks, i went high 12's.

venture to say a stock L98 in good condition with slicks/3.23 or better gears/2500-2800 stall or better will go high 13's, thats 220's whp.

NOTE: assuming sealevel to 2500 ft density altitude. My times above were at 1200 ft altitude in various weather conditions with DA ranging from 188 ft to over 2500 ft. 12's with the lower DA, 13.89 was in summer air with DA in the 2500-3000 range.
__________________
1989 Twin Turbo IROC-Z
"Twin Turbo 401 Buildup Pics "
Photobucket 401 Twin Turbo
1009 whp / 844 wtq 24.5 psi pump gas only
Orr89RocZ is online now vBGarage Page   Reply With Quote
Old 06-02-2010, 06:04 AM   #7
Senior Member
 
Join Date: Apr 2001
Location: Diamondhead, MS
Posts: 940
Car: 89 20th Ann. TA
Engine: Turbo 3.8 V6
Transmission: 200 4R
Axle/Gears: 3.27

Classifieds Rating: (0)

Re: How much horsepower/torque to run a high 13? auto tranny

Probably 260hp would be plenty. Stall and tires, and you might hit that with stock numbers.

I had a couple of friends that had 87 and 88 5.7 IROC's. Both ran 14.3 and 14.2 when they were bone stock back when they were both new. That was when the Gatorbacks still had bite as they were still new. Drag radials and a stall would have put them in the 13's for sure.
__________________
Rob
04 GTO
96 WS6
TTA 1387 is offline vBGarage Page   Reply With Quote
Old 06-04-2010, 09:23 AM   #8
Supreme Member
 
bbtaz97's Avatar
 
Join Date: Feb 2001
Location: Winfield, IL
Posts: 1,374
Car: 91 RS
Engine: 350tpi comming soon!
Transmission: fixed the 700r4 again!

Classifieds Rating: (3)

Send a message via AIM to bbtaz97
Re: How much horsepower/torque to run a high 13? auto tranny

well to give u an idea of what i have that im putting in my car to compare.

l98 with 58mm throttle body, ported plenum, slp runners , ported stock intake, stock heads with 1.5 rockers, msd wires and coil, 1 5/8 inch edelbrock headers, 3 inch exhaust and 342 gears , rebuilt tranny with 2400 stall, ls1 drveshaft and some suspension stuff ( LCA's and brackets, panhard rod)

I figured in going to get 275ish or so from the motor with decent traction.

I better hit mid 13's with this setup in a 91 RS for sure. one thing to consider as well is the weight factor. the lighter u make your car the less power u need to get into he 13s. easy stuff to do in getting rid of ac and egr crap for sure.
__________________
91 RS mods: 342 posi rear, spohn lca's and panhard rod with relocation brackets,ls1 driveshaft, built 700r4 trans with slp 2400 converter, b+m trans cooler, stewart stage 2 water pump, 1 5/8 edelbrock headers with 3' flowmaster exaust, 3 inch catco cat, i , msd distributor and msd wires, walbro 190 fuel pump, 58 mm throttle body, slp runners, ported stock intake. ac delete.

* Putting her together after 5 yrs of sitting . 350 tpi going in finally!
bbtaz97 is offline vBGarage Page   Reply With Quote
Old 06-04-2010, 09:14 PM   #9
Supreme Member
 
v10viper04's Avatar
 
Join Date: Nov 2006
Location: NY
Posts: 1,719
Car: 89' IROC , 84' Corvette,96' Caprice
Engine: Vortec 357, LT1, L99
Transmission: T-56, T-56, 4L60e
Axle/Gears: 3.23 POSI , 3.08 POSI, 2.93 Open

Classifieds Rating: (0)
Re: How much horsepower/torque to run a high 13? auto tranny

Mods in the sig, I'm basically running LS1 times at the track. Probably right around 330ish flywheel hp... I'm going to guess. I ran a 13.5@ 105 last time i was at the track. And that's rolling into the clutch and on street tires.(with a bog out of the hole also) lol i can't launch the car.... but i weighed my car in at 3680lbs with me in her.

I know she's got a lot more in her, i need DR's, better rear gears, and tuning. Yea i think the timing is close(not familiar with carbs).... Then after the gears and DR's i'll need a 9 or 12 bolt also... haha
__________________

1989 Camaro IROC-Z-Vortec 357/ KB hypereutectic pistons, scat forged connecting rods, XE274 cam, Vortec heads, LT's, T-56 Swap, Holley 600,, 3.23 4th Gen Rear.
1984 Corvette-LTx swap, LE1.5 heads, LE Custom Cam, LT's, 52mm TB, 30lb Injectors, MadZ28 Tune, T-56 swap, 3.07 POSI. 12.4 @114MPH. (And that's on 3.07's!) Getting 3.73's soon.
1996 Caprice-L99(4.3L V8),home plate delete, DD.

http://www.wnygm.com -Join today if your from Western New York!
v10viper04 is offline vBGarage Page   Reply With Quote
Old 06-04-2010, 10:49 PM   #10
Senior Member
 
d00012's Avatar
 
Join Date: Feb 2009
Location: Everett, Washington St.
Posts: 559
Car: 88 GTA
Engine: 5.7 TPI
Transmission: 700r4
Axle/Gears: 3.27 posi

Classifieds Rating: (0)
Send a message via MSN to d00012
Re: How much horsepower/torque to run a high 13? auto tranny

Check out the latest issue of Super Chevy. They build up an LG4 roller block, from 170 hp to 360 hp. Trick flow heads for 305, long-tube headers, 1.5 roller rockers, mild street cam (around .425-.450 range, heads had a max lift of .540), aluminum riser intake w/ Holley 750 carb (600-650 would work just fine). Given it wasn't run with accessories and an electric water pump on the engine dyno. All for around $2,000 (heads are around $1,200). That's around $10 per hp.

They will be making a tech article for TBI soon. So don't toss out your 305 yet. They have plenty of potential many people over look.

Last edited by d00012; 06-14-2010 at 05:24 PM.
d00012 is offline vBGarage Page   Reply With Quote
Old 06-07-2010, 06:34 PM   #11
Senior Member
 
Saculia's Avatar
 
Join Date: Feb 2007
Location: Minneapolis, MN
Posts: 725
Car: currently a 91 G92.
Engine: 305TPI
Transmission: Borg Warner WC 5 speed
Axle/Gears: 3.42

Classifieds Rating: (1)
Re: How much horsepower/torque to run a high 13? auto tranny

Quote:
Originally Posted by MTXaudioSYSTM View Post
not about the power its about mostly the performance of your vehicle. my buddys 01 gt with 97 markv swap pushes just 287 rwhp and runs high 12s all motor
287 whp is close to 360 hp at the crank. That's LS1 category. It better run 12s. Power and putting the power to the ground is the performance of the vehicle + the driver mod.
Saculia is offline vBGarage Page   Reply With Quote
Old 06-09-2010, 05:07 PM   #12
Senior Member
 
d00012's Avatar
 
Join Date: Feb 2009
Location: Everett, Washington St.
Posts: 559
Car: 88 GTA
Engine: 5.7 TPI
Transmission: 700r4
Axle/Gears: 3.27 posi

Classifieds Rating: (0)
Send a message via MSN to d00012
Re: How much horsepower/torque to run a high 13? auto tranny

Quote:
Originally Posted by d00012 View Post
Check out the latest issue of GMHTP. They build up an LG4 roller block, from 170 hp to 360 hp. Trick flow heads for 305, long-tube headers, 1.5 roller rockers, mild street cam (around .425-.450 range, heads had a max lift of .540), aluminum riser intake w/ Holley 750 carb (600-650 would work just fine). Given it wasn't run with accessories and an electric water pump on the engine dyno. All for around $2,000 (heads are around $1,200). That's around $10 per hp.

They will be making a tech article for TBI soon. So don't toss out your 305 yet. They have plenty of potential many people over look.
Magazine is Super Chevy not GMHT. My bad
d00012 is offline vBGarage Page   Reply With Quote
Old 06-16-2010, 02:42 PM   #13
Supreme Member
 
BigWhiteGTP's Avatar
 
Join Date: Jan 2003
Location: San Diego
Posts: 2,027
Car: 1994 Trans Am
Engine: LT1
Transmission: Auto
Axle/Gears: 3.23

Classifieds Rating: (0)

Re: How much horsepower/torque to run a high 13? auto tranny

With a full tune up, optimum gears, nice stall, drag radials, and you'll be there with stock hp.
BigWhiteGTP is offline vBGarage Page   Reply With Quote
Old 06-16-2010, 02:47 PM   #14
Supreme Member
 
bbtaz97's Avatar
 
Join Date: Feb 2001
Location: Winfield, IL
Posts: 1,374
Car: 91 RS
Engine: 350tpi comming soon!
Transmission: fixed the 700r4 again!

Classifieds Rating: (3)

Send a message via AIM to bbtaz97
Re: How much horsepower/torque to run a high 13? auto tranny

Quote:
Originally Posted by BigWhiteGTP View Post
With a full tune up, optimum gears, nice stall, drag radials, and you'll be there with stock hp.

not when you are starting out with a 305 tbi! first of all you dont have enough rpm range. plus by the time u built up a 305 you can have a 350 for about the same.

when i had my 305 tbi with 323's 2400 stall and lcas aftermarket intake and headers the best i got on a hot day was in the high 15's with decent 60ft times.
bbtaz97 is offline vBGarage Page   Reply With Quote
Old 06-16-2010, 10:27 PM   #15
Senior Member
 
budfreak1's Avatar
 
Join Date: May 2005
Location: Toronto, Ohio
Posts: 680
Car: 1991 Trans Am GTA
Engine: Full bolt on L98
Transmission: 4L60
Axle/Gears: 4th gen 10 bolt 3.42 posi

Classifieds Rating: (6)
Send a message via AIM to budfreak1
Re: How much horsepower/torque to run a high 13? auto tranny

I run a 14.2@96 in the 1/4 with 235 WHP and 318 WTQ. That's with 3.23 gears, street tires and getting lose off the starting line for about 10 ft. too.
__________________

1991 Trans Am GTA L98- Stock heads/cam, full bolt on: 13.54@98.7 mph
http://www.cardomain.com/ride/3802845#
1992 Subaru SVX LS-L 14.9@92.6 MPH
(VERY fast for an SVX)
1997 Chevy Silverado
budfreak1 is offline vBGarage Page   Reply With Quote
Old 06-17-2010, 08:31 AM   #16
Supreme Member
 
bbtaz97's Avatar
 
Join Date: Feb 2001
Location: Winfield, IL
Posts: 1,374
Car: 91 RS
Engine: 350tpi comming soon!
Transmission: fixed the 700r4 again!

Classifieds Rating: (3)

Send a message via AIM to bbtaz97
Re: How much horsepower/torque to run a high 13? auto tranny

Quote:
Originally Posted by budfreak1 View Post
I run a 14.2@96 in the 1/4 with 235 WHP and 318 WTQ. That's with 3.23 gears, street tires and getting lose off the starting line for about 10 ft. too.

the speed is there u prob just need better 60 ft times...
bbtaz97 is offline vBGarage Page   Reply With Quote
Old 06-17-2010, 09:37 AM   #17
Supreme Member
 
Thirdgen89GTA's Avatar
 
Join Date: Sep 2004
Location: Chicagoland Suburbs
Posts: 4,009
Car: 1989 Trans Am GTA
Engine: LT1, LE3 heads, 231/239 LE cam.
Transmission: M28 T56
Axle/Gears: 3.23 10bolt waiting to explode.

Classifieds Rating: (4)
Send a message via AIM to Thirdgen89GTA Send a message via Yahoo to Thirdgen89GTA
Re: How much horsepower/torque to run a high 13? auto tranny

Quote:
Originally Posted by wammac View Post
How much horsepower and or torque does it require for a 3rd gen to run a high 13 in the quarter mile. Im looking for a general answer because obviously there are many factors.

Basically whats the least you could get by with a 13 in 1/4 with an automatic transmission? With some good Gears if you must
Roughly 280hp at the crank.

I run 13.5 @ 102, with my race weight the car is estimated to make 330hp at the crank. Mods are in sig.

But I got something you may want thats even better.

A excel spread sheet that can do both. Its a sheet that can estimate HP from ET and Trap speed, as well as trap speed and ET from known HP and weight variables.

http://home.comcast.net/~thirdgen89g..._formulas.xlsx

Need Office 2007 viewers installed, Office 2007, or OpenOffice 3 to view the sheet.
Thirdgen89GTA is offline vBGarage Page   Reply With Quote
Old 06-17-2010, 11:15 AM   #18
Senior Member
 
budfreak1's Avatar
 
Join Date: May 2005
Location: Toronto, Ohio
Posts: 680
Car: 1991 Trans Am GTA
Engine: Full bolt on L98
Transmission: 4L60
Axle/Gears: 4th gen 10 bolt 3.42 posi

Classifieds Rating: (6)
Send a message via AIM to budfreak1
Re: How much horsepower/torque to run a high 13? auto tranny

Quote:
Originally Posted by bbtaz97 View Post
the speed is there u prob just need better 60 ft times...
Agreed. I need to adjust my tire pressures down some in the rear and work on my launch. My best 60' time was 2.05 and I know I should be able to hit a 1.9 at the least.
I should be in the 13's a little easier pretty soon anyway once I install my headers and Y pipe, delete my cats and AIR pump, and get my chip retuned.
__________________

1991 Trans Am GTA L98- Stock heads/cam, full bolt on: 13.54@98.7 mph
http://www.cardomain.com/ride/3802845#
1992 Subaru SVX LS-L 14.9@92.6 MPH
(VERY fast for an SVX)
1997 Chevy Silverado
budfreak1 is offline vBGarage Page   Reply With Quote
Old 06-17-2010, 11:18 AM   #19
Supreme Member
 
bbtaz97's Avatar
 
Join Date: Feb 2001
Location: Winfield, IL
Posts: 1,374
Car: 91 RS
Engine: 350tpi comming soon!
Transmission: fixed the 700r4 again!

Classifieds Rating: (3)

Send a message via AIM to bbtaz97
Re: How much horsepower/torque to run a high 13? auto tranny

Quote:
Originally Posted by budfreak1 View Post
Agreed. I need to adjust my tire pressures down some in the rear and work on my launch. My best 60' time was 2.05 and I know I should be able to hit a 1.9 at the least.
I should be in the 13's a little easier pretty soon anyway once I install my headers and Y pipe, delete my cats and AIR pump, and get my chip retuned.

Headers will make a huge difference in these cars no matter the engine. i would invest in some better lower control arms prob about 100 dollars and those will greatly help with traction..
bbtaz97 is offline vBGarage Page   Reply With Quote
Old 06-17-2010, 11:38 AM   #20
Senior Member
 
budfreak1's Avatar
 
Join Date: May 2005
Location: Toronto, Ohio
Posts: 680
Car: 1991 Trans Am GTA
Engine: Full bolt on L98
Transmission: 4L60
Axle/Gears: 4th gen 10 bolt 3.42 posi

Classifieds Rating: (6)
Send a message via AIM to budfreak1
Re: How much horsepower/torque to run a high 13? auto tranny

Quote:
Originally Posted by bbtaz97 View Post
Headers will make a huge difference in these cars no matter the engine. i would invest in some better lower control arms prob about 100 dollars and those will greatly help with traction..
I will look into those down the road as money allows, but my first big chassis mod is going to be SFC's I think before I move onto anything else chassis wise.
Thanks for the suggestion.
__________________

1991 Trans Am GTA L98- Stock heads/cam, full bolt on: 13.54@98.7 mph
http://www.cardomain.com/ride/3802845#
1992 Subaru SVX LS-L 14.9@92.6 MPH
(VERY fast for an SVX)
1997 Chevy Silverado
budfreak1 is offline vBGarage Page   Reply With Quote
Old 06-18-2010, 06:46 PM   #21
Supreme Member
 
89IrocZ350TPI's Avatar
 
Join Date: Sep 2005
Posts: 1,814
Car: ws6
Engine: ls1
Transmission: m6
Axle/Gears: 3.42

Classifieds Rating: (0)
Re: How much horsepower/torque to run a high 13? auto tranny

My old l98 when it had 240wrh it ran 13.9 with 2.77 gears. Got much better times when I threw in the 3.45's with a set of radials.
89IrocZ350TPI is offline vBGarage Page   Reply With Quote
Old 06-23-2010, 09:42 PM   #22
Senior Member
 
Rich92 RS's Avatar
 
Join Date: Oct 2005
Location: Crestview, Florida
Posts: 633
Car: 86 IROC-Z, 98 Z28
Engine: LS1's
Transmission: T56's
Axle/Gears: 3.73, 3.42

Classifieds Rating: (16)
Re: How much horsepower/torque to run a high 13? auto tranny

I think a well maintained L98 should be able to pull off high 13's with a few bolt ons. We've got an 92 Z28 L98/Auto with just headers, exhaust, intake, and 275's running 8.9 in the 1/8th mile with a crappy 60ft , which is high 13's in the 1/4.
Rich92 RS is offline vBGarage Page   Reply With Quote
Old 06-23-2010, 10:37 PM   #23
Senior Member
 
d00012's Avatar
 
Join Date: Feb 2009
Location: Everett, Washington St.
Posts: 559
Car: 88 GTA
Engine: 5.7 TPI
Transmission: 700r4
Axle/Gears: 3.27 posi

Classifieds Rating: (0)
Send a message via MSN to d00012
Re: How much horsepower/torque to run a high 13? auto tranny

Is the OP wanting to hit 13s, or are you just asking a general question to get different build ideas?

Are you sticking with your 305? Or getting a different 3rd gen/motor?


I plan on making my Firebird hit the 12.xxs. So this thread will help me some.
d00012 is offline vBGarage Page   Reply With Quote
Old 06-24-2010, 08:43 AM   #24
Supreme Member
 
bbtaz97's Avatar
 
Join Date: Feb 2001
Location: Winfield, IL
Posts: 1,374
Car: 91 RS
Engine: 350tpi comming soon!
Transmission: fixed the 700r4 again!

Classifieds Rating: (3)

Send a message via AIM to bbtaz97
Re: How much horsepower/torque to run a high 13? auto tranny

i think hes generally looking to hit the 13's and was looking for some power estimates personally. the best i can recommend is to get your ideas thru some basic engine software so you know what to expect. The other thing to consider is the type of fuel injection you are running. I had tbi and its great but TPI supplies the fuel so much better and evenly that i would be curios to see what that swap alone does on a dyno.


i can def say that it will cost less to build a 350 no matter the injection to get to the 13's.. a stock l98 auto TPI as started with a few mods should def be a high13 low 14s for sure pretty much no matter the driver. ALso for tbi the biggest problem is the heads. boy do they suck!

there is no replacement for displacement!!!
__________________
91 RS mods: 342 posi rear, spohn lca's and panhard rod with relocation brackets,ls1 driveshaft, built 700r4 trans with slp 2400 converter, b+m trans cooler, stewart stage 2 water pump, 1 5/8 edelbrock headers with 3' flowmaster exaust, 3 inch catco cat, i , msd distributor and msd wires, walbro 190 fuel pump, 58 mm throttle body, slp runners, ported stock intake. ac delete.

* Putting her together after 5 yrs of sitting . 350 tpi going in finally!
bbtaz97 is offline vBGarage Page   Reply With Quote
Old 06-25-2010, 09:14 AM   #25
Supreme Member
 
hellz_wings's Avatar
 
Join Date: May 2007
Location: Montreal, Canada
Posts: 2,231
Car: 1986 Chevrolet Camaro IROC-Z28
Engine: TPI 310ci (LB9)
Transmission: Custom Rebuilt 700R4 - 2600 Stall
Axle/Gears: 10 bolt, 3.73 Eaton Limited-Slip

Classifieds Rating: (2)
Re: How much horsepower/torque to run a high 13? auto tranny

Quote:
Originally Posted by budfreak1 View Post
I run a 14.2@96 in the 1/4 with 235 WHP and 318 WTQ. That's with 3.23 gears, street tires and getting lose off the starting line for about 10 ft. too.
The Weight of my car is a little under 3400lbs. I hit 14.2@96mph last week with 206WHP and 286WTQ, with quite a bit of spin at first. What helped me was definitely the tranny rebuild. I just replaced my bald tires with Firestone Firehawk Indy 500 Wide Oval Tires so that should put me in the high 13's I hope!
__________________
"An engine is like an orchestra. It's made up of wind, brass, percussion, and a whole range of other complimentary sections, all working to make that beautiful music that we call 'performance'..."

271FWHP - 354FWTQ --> (UN-TUNED... Tuning in progress! Will DYNO again soon...)
For mods go here --> http://1986irocz.tripod.com/
14.2 @ 96 on the 1/4 mile...
hellz_wings is offline vBGarage Page   Reply With Quote
Old 06-25-2010, 09:14 AM
ThirdGen
1992 Camaro




Paid Advertisement


Reply

Go Back   Third Generation F-Body Message Boards > Racing Boards > Theoretical and Street Racing

Tags
11, 12s, 13, 96, high, horse, horsepower, hp, mile, power, quarter, rear, run, sec, silverado, wheels
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

 


1982 Camaro '82 || 1983 Camaro '83 || 1984 Camaro '84 || 1985 Camaro '85 || 1986 Camaro '86 || 1987 Camaro '87 || 1988 Camaro '88 || 1989 Camaro '89 || 1990 Camaro '90 || 1991 Camaro '91 || 1992 Camaro '92


All times are GMT -5. The time now is 10:48 AM.


Powered by vBulletin® Version 3.7.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.5.2
All content copyright 1997 - 2014 ThirdGen.org. All rights reserved. No part of this website may be reproduced without the expressed, documented, and written consent of ThirdGen.org's Administrators.

Emails & Contact Details