Third Gen Association of OntarioRegional message board for everyone in Southern Ontario and nearby regions.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
THE CATCH: you gotta take it all...no single pieces
allright guys, im plannin on converting my interior to Black so all the tan/beige pieces have to go..instead of throwing em away i figured someone could use em, its almost complete...missing a few pieces here and there, but more or less complete outta an 83 T/A (no front seats, headliner or carpet) i do still have the carpet so if someone really wants it
Still looking for LG4 parts:
Exhaust manifolds,
OEM y-pipe,
air filter assembly.
Anywhere within a couple of hours drive from Barrie ( ON ) is preferable.
Also looking for front and rear valence/bumber covers for non ground effects Camaro.
82-84 PMD Knight Rider KITT bucket seats up for grabs. Make me some offers, need them gone. Foam is good, upholstery needs work, not ripped, but faded and stiching around the headrest is coming apart. Seat tracks need new feet. Drivers side seat bottom might be a little rotten, have a replacement included. In general these are in good shape, better than others I've seen and sold. PM with email for pics.
Aftermarket drivers side fender for Camaro - $50
Complete upper / lower black Camaro console (less trans plate), Excellent shape - $125
Automatic 4speed floor shifter - $20
Parking brake - $10
Passenger side black kick panel, no carpet - $25
Speedo head unit 91 Z-28 - $40
Pics available for all.
Went to give someone a test drive in my car, and the moron neglected to tell me there was a HUGE pot hole under that puddle.
Long story short, im looking for a windshield.
The glass in these cars was extremely well engineered, (if youve ever tried to sell it, you'll notice no one ever needs one). As a result i dont expect to pay much (if anything) for it.
If you have a car youre about to scrap, or a parts car that has a good windshield (within an hour of downtown Ottawa) please contact me. Ill do all the hard work.
-Azeem
ive had many parts cars in the last couple of years, and i always seem to need the parts i decided to chuck out.... oh well...
The only way you can get it cheap is if you take it out yourself.Its a PITA removing it. IMO youre better off spending $180 to windshield shop
i am looking for 6 pressure plate bolts(holds pressure plate to flywheel), apparently these are a special bolt and i refuse to pay what a dealer wants for them. If you have any, let me know. these bolts are for an lt1 t56
The chassis is an 88 IROC. The hood and fenders are gone but the rest of the body panels remain (nose, rear bumper cover, gfx, etc). The wiring is still inside and intact minus the window regulators which are gone. As far as interor panels, they're all there.
91-92 T/A/firebird front turn signal lights $50
85-92 T/A dash pad no cracks $25
grey carpet front to back BO
white GTA badges the whole set (one sailbird missing) $40
91-92 T/A/firebird headlight assemblys without motors BO
85-90 T/A GFX (No front bumper)
Rust Free 91 GTA shell. No drivetrain or rear end, will come with doors, hood fenders. Red hardtop original L98/700R4 - very clean, zero rust. Clean title, located in London, need to get rid of or it will be scrapped. $300.
Weiand Action Plus 8121 intake manifold for vortec heads. Approx 5k km on it, good shape $100.
Stock Rear lower control arms - boxed with Poly bushings, $50.
holset H2E turbo remaned same turbo as the hx50 Perfect size for a large 6 cylinder such as the supra , V8 such as the ford sbf 302 , chevy sbc 305 , chevy sbc 350 , chevy sbc 400
This turbo will boost as high as 50psi and make about 700++hp
this turbo has a drive pressure close to 1/1. That means the same boost levels of 35lbs only produce approximately 35lbs of drive pressure. Your head gaskets and rods are greatly relieved of excess pressure. So, for high boost levels and high HP applications, this turbo is a must for long life of engine components.
A/C delete / heater box and ducting for sale. Tired of tripping on this. Mint ones on eBay are going for $100. This one has a bit of rust perforation on the sealing lip, but its solid. Comes with all ducting and vent pulls. Just missing the dash control and wiring. PM for pics. I prefer dealing with local TGO guys, so make me an offer...SOON, otherwise, to eBay it goes.
Hey guys,I have a friend looking to get rid of complete set of black leather trans am seats from a 86.They are non power seats,rear is a bench..not split folding.The front driver seat cushions are a lil worn down but no tears,leather is a bit worn but looks relatively good.The side trim and handles could use a quick spray of fresh black paint..otherwise..decent seat replacements for a daily driver.Asking $150,in the scarborough area.pickup only.
Call Regi at 416 843 5126.Thanks
__________________ 350 Tpi SD stock base plenum and runners, bored 30 over, March serpentine pulleys, Hooker 2055 headers, 255lph fuel pump, Afpr, SlpAir foil, Corvette L98 heads with angled valves,24lbs Ford injectors,custom prom, 2800 stall, 700r4 stage 2 kit, Magna flow 3" lt1 catback exhuast, Eibach sportline lowering springs, BMR strut bar, TDS Wonderbar,Msd cap rotor coil, Taylor wires,Cold air intake,stock 3.23 gears,mild cam*specs unknown*.
Great for a project car. I purchased the Z last August for 4500 from the original owner. Spent another 1200 to certify/tune before putting her on the road. Car is straight, solid, clean, and ZERO rust (this car was never winter driven), but I Rust Checked checked it last year for the hell of it before I put her away, as she saw some fall/spring driving. Bought the car with 155k, now has just over 160,000 easy kilometers. This was a cruise car, so I've yet to bother pushing her over 4000 RPM. I still have most of the original service receipts, and RPO sheet. Everything after I bought it has been documented. Here's the lowdown:
Exterior
Candy Red, originally Silver
Complete new weather stripping and door felts
New Iroc nose intake, have original Z28 style
New louvers, have originals
Glass housing HID light kit, never installed
17" ROH wheels with TOYO directional streets, original 15" have new Goodyear winters on them
Extra set of side GFX
Installed prop rod
New hood hinges/struts never installed
Manual mirrors, have power ones to install with harness
Shorty Antenna
Interior
Grey carpet in great condition
Original power windows and power hatch release
Dashpad has no cracks
Swapped in full Black Interior panels, have original grey
New Pioneer head unit
New Pioneer 6x9's
New Pioneer 5"s
New headliner, visors, and sail covers in matching 2008 GM graphite weave material
Original dash, have AC delete dash, heater box, and ducting
New heater core installed
Original guages, have 140MPH speedo to go in
Original grey deluxe seats, have black highbacks waiting to go in
Black seatbelts, have original greys
Drivetrain
Rebuilt Quadrajet
Stock LG4 with new plugs
Removed AC condenser
700R4 rebuild and Shift Kit
New brakes w/slotted front rotors
AC delete pulley
I have all the original parts, if someone wants to resore it to factory, as well as a bunch of parts for planned mods, and miscellaneous interior bits.
GTA style front and rear bumpers (No cracks, need paint)
GTA style ground effects (No cracks need paint. No rocker/door GFX, fenders and rear 1/4s only)
85-92 style Trans Am Tail Lights (3pc, no cracks/chips/major scratches)
Best reasonable offer or full/partial trade on following parts:
Formula/Trans Am factory "cowel induction" hood
700R4
Firebird rear spoiler
82-84 Firebird rear bumper
Misc 3rd Gen F-body perf parts
Misc 82-84 Firebird parts
Misc SBC perf parts
for sale 3 sets of BBC heads
427Oval Port Cylinder Heads cast num 3909802 with a v stamped on them looking to get $500
396 400hp Oval Port Cylinder Heads cast num 3983802 $ looking to get $350
454 Oval Port Cylinder Heads cast num 336781looking to get $350
Motor is complete less pan, and back cover and would need a new set of lifters, cam and a minor rebuild But overall after inspection this motor is in good condition!
The AFR Heads were done not long ago and have less than 20 k on them, they have Paitriot dual springs in them as well.
included on the motor is a ported throttle body.
included on the motor is a fast intake manifold with injectors.
The fast intake is a 78 MM opening type - The top part can be added to make it a 90 MM now - The throttle body has been ported
The heads are street ported with patriot dual gold springs good for up to a .650 lift with titanium retainers
A stock cammed motor making 351 HP / 362 ft. lbs.of torque is pretty healthy - Add a mild streetable cam for an easy 40 to 50 HP more
I was going to keep this but have decided to move it for a quick sale.
There is no harness or cpu or coils, this is just a complete motor less the items I mentioned and as posted in picture included.
Alston sub frame connectors, brand new never installed $175.00
TPI Throttle body plate anodized red $20.00
Iroc Tail lights $75.00
T tops $50.00
Granetelli Adjustable pan hard bar $100.00
Last edited by zedder 1 9 9 0; 02-12-2009 at 07:21 PM.
WTB
I need both L and R inner plastic fenders that are in reasonable shape (not broken or cracked) scratches ok though.
Still in need of a '91-'92 camaro front nose ground effect spoiler
and am in need of front end air dam (the piece that directs air over the rad, and hangs under the car)...
Also looking for a leather 1988-89 GTA style steering wheel - centre controls not needed. Any condition considered.
TIA
-Andrew
Last edited by kaptinkafeen; 02-21-2009 at 09:28 AM.
Reason: Added info to post
In looking for the Holley Stealth Ram vortec manifold (EFI). I really only want to buy the base. (vortec heads) The origional PN is 7542 russ_q@yahoo.com
