Third Gen Association of OntarioRegional message board for everyone in Southern Ontario and nearby regions.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
Camaro parts (to fit 86) wanted :
Mint condition 5-speed shifter plate. No shift boot required.
Mint condition upper console (black plastic part) with or without lid.
Mint condition console lid.
Seat foam for a single front standard seat, no lumar or anything. Anybody have a camaro passenger seat with foam that's not a wrecked in it?
Door panel (drivers side) black plastic thing that surround door pull handles/power lock switches/remote mirror thing. I'll take both if you have them.
Steve and I have gone through quite the number of parts cars over the past 2 years. It's at the point where our shop is being overwhelmed with parts. We need the space. We have tons of interior pieces, engine pieces, emissions stuff, interior panels, security covers, nose piece, gfx, spoilers etc. We have a set of 15" Z28 wheels. Carb, Z28 hood, blisters, Griffin rad, custom hoses, Barry Grant 750DP carb, Holley 670 Street Avenger Carb, BandM proshifter used for a few weeks, I mean the list goes on. I have pics of some of our stuff at the shop but it's only part of it. Lots of other stuff hasn't been brought up to the shop and had it's picture taken to ad to our list so feel free to ask either Steve (demon355) or myself about anything you may need. Instead of posting a pic of every single part, heres a photobucket link to some of the parts. Prices are not set in stone so if you need/want anything, let us know.
HELP!!! LOOKING FOR... DRIVERS SIDE DOOR PLUG/HARNESS/WIRING
Re-doing some wiring in my RS. Im tyring to find the plug/harness that exits the drivers side door (power locks, windows and mirrors) and connects 2 the main harness. Ive not had any luck so far... Any help wud be greatly appreciated.
1990-1992 Beechwood (tan) cupholder, drivers side, nearly mint, one barely noticeable scratch.
1989-1992 Beechwood interior parts - almost the entire interior from a GTA (no seats, no front carpet) - I WANT IT GONE, so make an offer. Most parts are 7 out of 10 or better. Includes a VERY nice set of belts+spares. I would take $100 for everything, otherwise plastics are going in the garbage and belts are going to ebay or the thirdgen classifieds. Will consider trades for ?? PM me if interested.
Black cloth front and rear seats complete for 3rd gen camaro/firebird, small cig burn in 1 rear lower seat cushion, hard to notice, otherwise seats are in immac cond, seats flip forward and back and return to there preset position. seats located in scarborough, if interested send me a pm or email me at Hampdogg69@hotmail.com. if you are serious about buying i can get pics, just a bit of a p.i.t.a as they are in the rafters in my garage covered. best offer over $150
Viper 5902
- 2-way oel full color pager alarm/starter combo
- includes xpresskits dlpkgm bypass kits for most GM 's 99+
Asking $450 for the package. Retails $499, bypass kit retails $99
*SOLD*
Nustart NUS1000B Remote starter
- comes with 2yr service plan
Asking $99, Retails $149
Im a licensed automotive electronic accessory technician and willing to offer installation if needed.Pm me for more information. Located in Scarborough.
Last edited by 86White_T/A305; 01-24-2010 at 05:26 PM.
PARTING OUT 87 IROC
350 TPI 200K
AUTO TRANNY 700R4
4 WHEEL DISC
HOOD FENDERS HATCH ETC
GREY INTERIOR
T TOPS
CAN BUY COMPLETE OR PARTS
CALL 905 347 1999
I'm interested in the transmission.
Where are you located?
__________________ 1986 Sport Coupe, underside & engine bay sandblasted/painted, 353 Gen 1 SBC, Vortec heads, XR276HR Comp cam, 1.6 Comp Pro Mag rockers, Full MSD Ignition, 700R4 w/ usual upgrades, 10" TCI convertor,3" driveshaft w/ 1350 u-joints, Dana 44 w/3.73 posi. All new suspension, LS1 front brakes, 1LE rear brakes, Del-A-Lum bushings, UMI adjustable torque arm, Intrax 2" drop springs. Best time on old chassis(86IROC,3700lbs)12.77@105/8.09@84(1/8th)w/1.70 60'. New chassis...12.74 @ 108. (Same weight)
86 TA 502. Work in progress. 86 IROC-Z. Winter beater.
PARTING OUT 87 IROC
350 TPI 200K
AUTO TRANNY 700R4
4 WHEEL DISC
HOOD FENDERS HATCH ETC
GREY INTERIOR
T TOPS
CAN BUY COMPLETE OR PARTS
CALL 905 347 1999
looking for the plastic bolts and nut from the back molding in the trunk. You have? and how much to stick in an envelop and mail to L0E 1E0.
Thanks
PARTING OUT 87 IROC
350 TPI 200K
AUTO TRANNY 700R4
4 WHEEL DISC
HOOD FENDERS HATCH ETC
GREY INTERIOR
T TOPS
CAN BUY COMPLETE OR PARTS
CALL 905 347 1999
Wheels:
1) Weld Drag Lites – 15x3.5” & 15x8 (w/3.5” BS) – 5x4.75 bolt circle, includes 165R15 & 275/60R15 tires, 20 lugs & washers and 2 centre caps - $849
2) 2002 Z28 Factory “Snowflakes” – four 16x8 wheels (5x4.75” bolt pattern), includes 245/50R16 GSA tires (worn) and 26x10.5 ET Streets (not mounted) and centre caps and a set of 235/50R16 Toyos Proxes - $300
4)Two (2) Cooper Cobra 215/65R15 tires in good condition – $60/pr
5)Two (2) Hercules 275/60R15 tires in good condition - $110/pr
Engines & Parts:
1) Complete TPI 305 Swap – includes- Full ECM and Chassis harnesses, 7730 ECU (Speed Density), Factory in-tank electric fuel pump and hanger assembly, Intake bellow, upper and lower air boxes and K&N drop-in filters, Dual electric fan assembly w/upper and lower brackets, Stock 1991 LB9 shortblock (rated at 9.3:1 Compression (230hp/300ft-lbs)), Fully ported upper, lower and intake runners, Factory distributor (cap, rotor and MSD Blaster coil), Ford Motorsport "19lb/hr" injectors (rated at 22.5lb/hr at 43.5psi), Holley adjustable fuel pressure regulator, Ported throttle body w/air foil & TPS, Fully ported "193" heads (specs below) w/stainless steel 1.94 intake & 1.5 exhaust valves, guide plates, screw-in studs & factory rocker arms, Full CompCams roller valvetrain w/stock TPI computer friendly cam, Hydraulic roller lifters, pushrods & matching valve springs, Factory valve covers; and Extra TPI gaskets - $1299
3) GM Performance Parts LT4 valve springs (P/N 12495494) – NIB - $35
4) Stock TBSS intake setup (complete w/silencer) w/K&N replacement filter - $75
5) Crane Cam Gen 1 SBC (retro-style) solid roller lifters with rev kit, Gold roller rockers and stud girdles & lock nuts; used and in fair condition - $235
6) Center bolt valve covers (a bit grimy, minor rust spots… but sound) w/grommets and oil cap - $10
-3rd gen single Electric fan (with the brackets). (Best Offer)
-Several hatch struts (1 is new i think, the rear defrost tab broke off, so i used 1 new and 1 old on my car). If you have a camaro hatch, or no spoiler, they will work fine. I had a firebird spoiler, and the hatch wouldnt "pop" but it would stay open with these. (Best Offer)-Center console top plate (camaro). The holes in the glovebox that fasten it down are slightly damaged, will need a fastener to secure it down. (Best Offer)
- 1 firebird GTA hood. Top skin cut down the middle in an attempt to make it into a cowl hood, but never got around to it. (FREE)- 1 Firebird regular hood, with hole cut in it (centered above air cleaner). (FREE)- 1 Hatch (from firebird GTA) with rear defrost, and spoiler holes. (FREE)
- 2 Urethane wrap around spoilers (need work). (FREE)- 2 Grey door skins (with the black plastic damaged) but the skins are in excellent shape. (Best Offer)- possibly 2 sets of grey rear speaker covers (1 set for sure). (FREE)
- Set of seatbelts. 1peice missing, i seem to have lost it in the basement somewhere. (Best offer)
All items listed above are BEST OFFER (that includes Free for most of them).
All items listed below are priced and some best offer.
- 1987 Firebird/GTA console top plate. Auto, modified for T56. PRNDD21 slot now reads FIREBIRD. It illuminates as well. ($35 obo)
- 82-89 Camaro 5 speed shift plate with leather boot. A little mouldy, but in good shape. ($35 obo)
- 85-92 Camaro Z/28 or IROC 3-pc spoiler with brake light. Red in colour, faded, but in mint shape. All mounting taps intact, no cracks or scratches. ($60 obo)
- Spohn T56 conversion x-member. Driveshaft loop, LT1, powdercoated black. Used for 6months, costs $200+++ CAD to your door. Asking ($150 firm).
- Original 1987 firebird radio. Tape/ with equalizer. Ive never seen another one so they must be rare. Perfect working condition, ($35 obo).
- Gen1 SBC HEI distributor. Brand new cap, rotor,, 3 different kinds of timing weights and springs, including CRANE. Crane adjustable vacuum canister, and home built lock out plate if so desired. Brand new ACCEL HEI Super Coil, and Cap/rotor combo. No wires... Have receipts for all. ($150 obo).
I probably have a few more odds and ends kicking around. Contact me with questions. Cheers.
I got few things up for grabs boys so here is the list:
-Complete 305 Tpi engine with 700R4 tranny, computer,engine harnes from an 87 Iroc.Has headman headers emissions legal,flowmaster cat back exhuast,slp air foil and hypertech chip.
-87 Camaro body parts all in decnent shape: hood,hatch and glass,spoiler,doors,fenders and rear quarters,Roof with Ttops and bags,front clip with headlights(no front gfx..was sold),rear gfx,side skirts..driver side is broken but can be easily repaired,tailights,rear bumper,dashpad and complete dash with cluster
-82 Transam shaved doors primed for paint..passenger door has one hole to be filled.was for my project car.
-2002 Transam convertible complete custom box install with gloss black painted finish for 2 12" subs..ported.the port is a hand bult pontiac symbol..a must see.may fit 3rdgen convertibles aswell.
Pics are available upon request.
For more information contact
me(Regi) at 416 843 5126 or Chase at 416 750-HIFI
Im throwing these out soon, get them if youre interested.
- 1 Rear hatch (glass and all). Its from a firebird with wrap around spoiler, and rear defrost. Good condition. (i have 2 wrap arounds to go with it if you want, they need work).
- 2 Firebird hoods. One is a regular, the ther is GTA style. The first one has a hole cut in it for the air cleaner (pictured), the second one is cut up to make a cowl hood, but i never got around to it. Its in one peice.
The glass is the same, the rear where the spoiler mounts has different holes (but is the same panel) and the frame that borders the glass for the wrap-around spoiler has tangs on it that the Camaro frame does not have.
Selling my baby!! 1986 Z28 c/w 383 and more.....
Ad at www.autotrader.ca (search for 1986 Camaro Z28...in London and surrounding area) will be on the site some time Wednesday! Also posted on Kijii London.
The car is clean and solid, hasn't been winter driven (at least since I've owned it)....comes with a spare hood, extra suspension parts and carb (even the 305 if you want it!!!)
I'm moving and unfortunately the car can't be part of the plan.....
$10,500 (over $10K in engine, drivetrain and other upgrades.....in other words the car is almost free.......)
__________________ 1986 Z28 T tops, 305 4bbl , 700R4 with kit, 3:73 Posi ...
Headman headers, 3" cat, 3"exhaust through 40 series flowmaster
Just recently picked up an 82 camaro for parts and am selling the black interior out of it to start. Front seats are mint ever the driver seat has no tears at all. The plastic panels are the carpeted version. Included is
Door panels
carpets
seats front and rear
all plastic panels
sun visors
sail panels
center console
seat belts
and all little trim pieces for it
only thing that looks shot is the head liner which if you want it you can have it included.
I have to still take the interior out so i will need a few days still as i wont be able to do so till the weekend. If your interested I have some pics and you can PM me. thanks
Parting out my 1987 Trans Am, black interior, have the seays left, not bad shape, the bolsters are perfect as are the rear seat bottoms, the seat backs are the split style but need a little work as does the front seats.
Hood in decent shape, very minimal surface rust absolutley no holes as well as the fenders, but they need a little work, but in decent shape. I also have two power window motors that worked well. I also have some GFX and front nose and rear bumper cover, very good shape, no cracks.
My car is up for grabs! I bought a bike last summer and spend most time on it now and my work schedule takes me away from home alot so its time for someone else to enjoy the car.
specs:
hardtop
5.7 l
edelb rock intake and carb
new rad, waterpump
3.23 posi rear ead
strut tower brace(have sfc just not installed)
new tires last summer(less then a 1000KMS)
kybs and sportlines just installed
new headliner
all kinds of other stuff i have a folder full of reciepts for this car. I'm asking 4500obo. i want it gone so try me with something reasonable.
email me for pics ******pride@hotmail.com (spell m ullet where the stars are)
I got an 82 that im parting out completely and need everything sold soon. Prices are not set in stone so make an offer and heres the Kijiji ad. Willing to ship smaller pieces. Thanks
Has a built 355sbc 1970's block(330hp/350tq),full 3 inch exhuast and built 700R4 trans.Both under 10,000km Non posi rear
Body is in decent shape,mostly garage kept for the past 6yrs.Needs new floor pans otherwise still a good project car.
Interior is showing its age,non power optioned car.
Asking $1500 as is
sold
Last edited by 86White_T/A305; 04-27-2010 at 01:24 PM.
)) - $30
