jaron

Parting out an 86 Firebird in ONTARIO, local pick up preferred on ALL parts, the car is located in Kennilworth ontario, which is just north or arthur and west of orangeville!

its got a 2.8ltr V6, with a 5spd in it, engine and tranny are MINT, buyer of that will get the shell with it as well as well as whatever parts are left over....

Engine/tranny - $300 (certain drivetrain parts missing {pedals, shift knob, master/slave cylinders} i used the car for a 5spd swap)
Center Console - $30 (no radio pod)
T-Tops - $100 (w locks but drivers side doesnt work)
Tail Lights - $50 (missing the center piece)
Spoiler - $50
hood -$30?? bit of rust on it as well as holes where there was an idiotic scoop
Seats - Drivers seat is shot and the passenger has a rip in it, comes with front seat covers - $50 OBO??
Gauges - $20 have two of them!

and whatever else you guys can think of ..... need to get rid of this ASAP...will be junking the car if there is no response...flexible on all prices..need to get some money back from this car!!!


ORRRR TAKE THE ENTIRE CAR AND PART IT OUT URSELF FOR $300!!

PS, you wont be getting certain stuff with it, im keeping the rims and tires, spare tire, door locks, headlight motors and a few other small parts! but $300 takes whatevers lefT!

Knight98

Hi All, Newbe here. I am looking for

2-245 50ZR 16 for a 89 GTA


1- EGR sensor cable (Little cable that runs from the EGR)

1 -Center console for the Radio Controls

Thanks

jonathanryder

I grabbed the 17" ROH's this weekend, and called shotgun on the Dual fans and AL driveshaft, but if anyone else in TO wants parts, this guy is great to deal with. The rims are bangin'!!

89junkyardgta

Shame to kill that car...I'd buy it if it had t tops!!

Daz

Sold please delete

Demon355

W/C T5 Trans
W/C extra case
Clutch/Pressure plate/Flywheel (clutch is broken)
Pro 5.0 shifter (brand new never used or installed)
New leather shifter knob (stock)
Hurst white 5spd knob (never tried it on pro shifter)
Stock driveshaft
Clutch Master cylinder etc.

Comes with everything but pedals, throwout bearing and pilot bearing. I need to keep the pedals for my car. T5 was installed in my buddies '84 Z28 with 300+whp and held up just fine. When removing the trans out of his car one of the mounting ears broke off so thats why an extra MINT WC case is included. I'm asking $700 because of the new shifter and other goodies but most T5 swaps go for $500 so I figure this is a fair price. Price isn't firm but no low ballers or "tire kickers" if you get my drift. Pics are available.

__________________

1988 Chevrolet Camaro IROC - "Reaper"
My CarDomain - My FQuick
Toronto F-body Motorsports

jonathanryder

Complete front end (everything ahead of the rad) from an 87 Z28.
Located in Mississauga.
Lights and GFX included.
Got to go ASAP.
Best offer.

Gnarley_Boarder

WTB: iroc wonderbar , looking for a wonder bar in good shape.

pearl_iroc

got a set

thanks

online170

I have 4 motomaster 195/70R14 tires mounted on rims for a 1985 berlinetta. They will fit any GM with a 5 x 4.75 inch or 5 x 120.7mm bolt pattern.

Although the tires have nearly 100% tread on them, they are NOT SAFE.

Regardless, i DID drive on them for 2000kms, and the whole season last year. But after having a close look at them, im glad i didnt have a failure. They have bubbling and small cracks all over.

These are FREE to a good home. I would only recommend these for use on a farm, or for spares while youre actual wheels are being balanced or something. Again, they will work, but are NOT SAFE.

Just wanted to give anyone dibs if they can be used, or i will scrap them in about a couple of weeks.

The Project

I am selling the original Black front seats from my 89 Camaro. No rips or tears and are in great condition.

6speedIROC

1995 LT1 IRON 'vortec' heads.
These are reverse flow coolant heads, so will need some coolant passages plugged to drop on a gen 1 engine with an LT1 intake. Heads have about 80K on them and are in perfect shape. These things flow very good for stock heads. I ran a 13.6 at 106 with a small Buick Roadmaster cam on the IROC with 3.23 gears. Come complete with springs and rockers.

http://www.thirdgen.org/techboard/tp...eads-gen1.html (Completed: LT1 Heads on a GEN1)

Asking: 1 case of beer

Black82Z

Wanted third gen doors in moderate condition, internals not needed but would be nice.

Shaved my handles, good idea

Want handles back,

would prefer complete doors that just need a little work and paint.

Please let me know what you have @

Tire_fryer@hotmail.com

Thanks

jonathanryder

Looking for a nice set of BLACK door panels for a Z28 near Toronto.
Anyone?

jonathanryder

Also have an AC delete dash, complete with double pointer guages, and matching console with clock. No cracks in anything, just dusty.
Best offer.

pearl_iroc

i got a GM 3:42 ring and pinion for a 10 bolt 7.5 diff, nothing wrong with it, just not gonna use it ne more, $50

thanks

andyiroc88

One pair of 275-40-18 Goodyear Eagle F1's off the rear of an '04 vette
50% tread left. Must go $50 each.
One set of 4 (2 front and 2 rear) 16x8 Firebird wheels 86 ish?$200 needs tires.
One bbc Holley Strip Dominator rec port intake - good shape with long carb studs still in it.$140

jonathanryder

Here's pics of some stuff. Best reasonable offer takes it.

Complete working AC Delete dash. Dust, plug in, and you're ready to go.
Console top with working clock option.

Complete Grey interior from an 85. Front seat and belts included onceI pull them. Passenger door sill is cracked, but everything else is in great condition.

Nosepeice from an 87 Iroc. Lights work, but needs paint.

12" oval Chrome air cleaner.

Hood hinges.

Attached Images

	100_3798.JPG (100.0 KB, 11 views)
	100_3799.JPG (92.7 KB, 20 views)
	100_3801.JPG (81.9 KB, 21 views)

Daz

Brand new HSR,with fittings and waterneck

$250

Daz

SOLD PLEASE DELETE!

89junkyardgta

A/C delete inner guts (heater box and ducting, no dash) up for grabs. Heater box has some holes on the mounting flange...some POR-15 or epoxy would fix it fine. Currently missing the wiring from the controls to the blower...I might be able to find it. Offers, get it out of here. PM with email address for pics.

89junkyardgta

Beachwood interior from a 1989 GTA for sale. No seats, front carpet or headliner. Visors and speaker covers are ok, rest is pretty good, about 8/10. I have brackets for mounting the deluxe door panels to standard doors. PM me for details and pics.

Shift06

I am looking for an L98, so if anyone has one I would be willing to either buy it or trade for it. I have:

- 700R4 Tranny, shifts great, no problems, I believe there is a shift kit in it. $300 or accepting trades.

- 1991 LB9 Exhaust manifolds w/ AIR tubes

- Misc. A/C parts off 1991 GTA (condenser, compressor, accumulator etc, not sure if they are working or not, a/c was discharged prior to removal)

- LT1 Camshaft

- 2 10" JBL Subs

- Stock air intake off 1991 GTA

***Non third gen related stuff**

- Tipmann 98 Custom Platinum Series paintball gun, with 2 hoppers, 20 oz tank, camo design, mask, Liberty Stock, Tipmann barrel cover, and barrel squeegee. $300 OBO

- Compaq PC Tower. AMD 64 3800+ @ 2.4 Ghz, 2GB RAM, 512MB GeForce 8500GT BFG Video Card, Windows Vista. Like new condition. $300 OBO


Thanks for looking, either PM me, or email me at shift.2004@gmail.com


Thanks!

Daz

4th gen LT1 dash and console - air bag still intact.Comes with the dash cover(cracked)

best offer or trade

George

Anyone have an upper panard aka track bar that they want to get rid of. A friend of mine needs one for his 87 race car.

It's the No 4 piece in the attached illustration:

Daz

00-02 10 spoke SS wheels.Mint.No tires.17 x9 .You will need 2" spacers for it to work on a thirdgen or S10 5 x 4.75" bolt pattern




e_daz@hotmail.com

online170

Scrapped, plz delete.

Daz

sale pending