The White Knight

http://kitchener.kijiji.ca/c-cars-ve...QAdIdZ69998036

Make an offer

PM or Respond to kijiji add

skinny z

Wanted to buy:
For an LG4 ( 305 4bbl );
Exhaust manifolds,
y pipe,
Air filter assembly.

skinny z

Wanted to buy:
700R4. Stock condition is ok. Needed for second daily driver. Prefer 88 or newer.

Kevin Vandevenne

95 Z28 cloth seats, complete set, front and back, black/grey excellent shape, no rips or tears. $150obo

Dash off a 91 GTA, excellent shape $100

Rear power hatch motor - great shape, works well $60

Complete set of 91 GTA ground FX, includes nose, rear bumper, side fx. red all parts in good shape. $400

Serpentine setup off a 91 L98 - complete $125

All parts Best offer, located in london. Have pics, can send

jaron

FREE INTERIOR!!!!!

THE CATCH: you gotta take it all...no single pieces

allright guys, im plannin on converting my interior to Black so all the tan/beige pieces have to go..instead of throwing em away i figured someone could use em, its almost complete...missing a few pieces here and there, but more or less complete outta an 83 T/A (no front seats, headliner or carpet) i do still have the carpet so if someone really wants it

The White Knight

Looking for front bumper, rear bumper and side grd effects from a GTA to go onto my formula.

The Project

PM sent

skinny z

Still looking for LG4 parts:
Exhaust manifolds,
OEM y-pipe,
air filter assembly.
Anywhere within a couple of hours drive from Barrie ( ON ) is preferable.

Also looking for front and rear valence/bumber covers for non ground effects Camaro.

Bad-Newz

WTB:

3rd gen Camaro Front Nose Emblem - Fair condition or better

Im also looking for a set of Black Leather 4th gen seats (front and back) - If youv'e got 'em or know where I could get 'em, shoot me a PM... THANX

__________________

1991 Chevrolet Camaro RS w/ T-tops - 3.1 MPFI V6 - IROC hood - K&N Filter - Dynomax Exhaust - 16'' ZQ8 wheels - Tint - speaker upgrades: Pioneer 4x6's; Kaption Audio 6x9's - some other crap... http://www.cardomain.com/ride/2480021

REJ

New in box, Competition Engineering weld in sub frame connectors #C3046. For 3rd gen. Check their site for info.

http://www.competitionengineering.co...?CatCode=10054

Asking $140 obo

skinny z

Looking for front and rear valence/bumber covers for non ground effects Camaro.

online170

My 1987 Firebird for sale. IN OTTAWA

$8500 obo. I would REALLY like to trade it for a Buick (67-72) or almost any GM-Abody. Pm with questions or offer. Nothing wrong with it, its just time for something new....

NO EMISSIONS req'd

http://toronto.kijiji.ca/c-cars-vehi...QAdIdZ77225356

89junkyardgta

82-84 PMD Knight Rider KITT bucket seats up for grabs. Make me some offers, need them gone. Foam is good, upholstery needs work, not ripped, but faded and stiching around the headrest is coming apart. Seat tracks need new feet. Drivers side seat bottom might be a little rotten, have a replacement included. In general these are in good shape, better than others I've seen and sold. PM with email for pics.

90_T/AGTA

WTB: drivers side fender for 82-92 firebird Pm if you got one thanks

Steve Petroff

Aftermarket drivers side fender for Camaro - $50
Complete upper / lower black Camaro console (less trans plate), Excellent shape - $125
Automatic 4speed floor shifter - $20
Parking brake - $10
Passenger side black kick panel, no carpet - $25
Speedo head unit 91 Z-28 - $40
Pics available for all.

Doug Phillips

Hedman headers #68470 and y-pipe. test fit and run in only. $200 obo

85 front and rear seats dark blue $200 obo

5 speed centre console $50

two sets of 16x10 rims, fit a 4th gen, might fit 3rd gen with spacers. One set is only 12 lb/rim! $500 and $800

zedder 1 9 9 0

1990 Iroc z Convertible, Triple black, custom leather interior. 211 000 km's, many new parts over the years. $8,000.00 as is. http://ottawa.kijiji.ca/c-cars-vehic...QAdIdZ80192804

The White Knight

Looking for the orange bulb covers for 85-92 Gauge cluster for a Firebird.

Need enough for hole cluster

online170

Went to give someone a test drive in my car, and the moron neglected to tell me there was a HUGE pot hole under that puddle.

Long story short, im looking for a windshield.

The glass in these cars was extremely well engineered, (if youve ever tried to sell it, you'll notice no one ever needs one). As a result i dont expect to pay much (if anything) for it.

If you have a car youre about to scrap, or a parts car that has a good windshield (within an hour of downtown Ottawa) please contact me. Ill do all the hard work.

-Azeem

ive had many parts cars in the last couple of years, and i always seem to need the parts i decided to chuck out.... oh well...

Daz

The only way you can get it cheap is if you take it out yourself.Its a PITA removing it. IMO youre better off spending $180 to windshield shop

mikesz1984

i am looking for 6 pressure plate bolts(holds pressure plate to flywheel), apparently these are a special bolt and i refuse to pay what a dealer wants for them. If you have any, let me know. these bolts are for an lt1 t56

kaptinkafeen

WTB:

'91-'92 front end/lower spoiler

set (two front and two rear) 16" GTA cross-lace wheels - any colour, rubber not important
TIA
-Andrew

MFaust89

you have a pm.

90_T/AGTA

91-92 T/A/firebird front turn signal lights $50
85-92 T/A dash pad no cracks $25
grey carpet front to back BO
white GTA badges the whole set (one sailbird missing) $40
91-92 T/A/firebird headlight assemblys without motors BO
85-90 T/A GFX (No front bumper)

6speedIROC

2 Black Side Front Kick Panels - Passenger side has carpet, Drivers side no carpet. Decent shape.

Free to good home, must pick up!

Kevin Vandevenne

Rust Free 91 GTA shell. No drivetrain or rear end, will come with doors, hood fenders. Red hardtop original L98/700R4 - very clean, zero rust. Clean title, located in London, need to get rid of or it will be scrapped. $300.

Weiand Action Plus 8121 intake manifold for vortec heads. Approx 5k km on it, good shape $100.

Stock Rear lower control arms - boxed with Poly bushings, $50.

Pics available. Parts located in London, ON

z28phill

holset H2E turbo remaned same turbo as the hx50 Perfect size for a large 6 cylinder such as the supra , V8 such as the ford sbf 302 , chevy sbc 305 , chevy sbc 350 , chevy sbc 400
This turbo will boost as high as 50psi and make about 700++hp

this turbo has a drive pressure close to 1/1. That means the same boost levels of 35lbs only produce approximately 35lbs of drive pressure. Your head gaskets and rods are greatly relieved of excess pressure. So, for high boost levels and high HP applications, this turbo is a must for long life of engine components.

looking to get $500.00 can obo phillip.walker@sympatico.ca
link to ad in ottawa http://ottawa.kijiji.ca/c-cars-vehic...QAdIdZ89676104

89junkyardgta

A/C delete / heater box and ducting for sale. Tired of tripping on this. Mint ones on eBay are going for $100. This one has a bit of rust perforation on the sealing lip, but its solid. Comes with all ducting and vent pulls. Just missing the dash control and wiring. PM for pics. I prefer dealing with local TGO guys, so make me an offer...SOON, otherwise, to eBay it goes.