Paul_Hughes_87 T/A

I had to delete the old thread because I cannot delete individual posts anymore. What I will do now is at the end of every month I will delete the classified thread and open a new one for the next month.


Here are the rules........

1. Post all parts for sale in a single post whenever possible
(no multiple parts in seperate posts posted on the same day)

2. No responses PM or email the person directely
(responses will be deleted right away)

3. F Body parts only please

4. PM me directely when the parts are sold so I can delete the
post to clear up the board

5. The moderators assume no responsibility if you get burned in
a sale

6. No sigs or pics of the parts, email pics to the potential buyer
please
(faster loading times for those on phone line)

To post just reply to this thread

__________________
2005 Chrysler 300C
Yes it has a HEMI

2006 Dodge Magnum
and no it doesn't have a HEMI

-------------------------
MAIL ME
paulhughes@rogers.com
-------------------------

The White Knight

Complete TPI system for Sale

Plenum
Fuel Rail with Regulator
Runners
Intake Manifold
Fuel Injectors
Throttle Body
ECM with Prom
Wire harness (body and engine)

All are unported and off a L98 350.

PM me for pics/details

Asking : $500.00 CDN

razor

QA1 non adjustable rear shocks....new in boxes

Will fit 82-92 fbody

Pics available

100 shipped

86White_T/A305

I got few things up for grabs boys so here is the list:

-Complete 305 Tpi engine with 700R4 tranny, computer,engine harnes from an 87 Iroc.Has headman headers emissions legal,flowmaster cat back exhuast,slp air foil and hypertech chip.

-87 Camaro body parts all in decnent shape: hood,hatch and glass,spoiler,doors,fenders and rear quarters,Roof with Ttops and bags,front clip with headlights(no front gfx..was sold),rear gfx,side skirts..driver side is broken but can be easily repaired,tailights,rear bumper,dashpad and complete dash with cluster

-82 Transam shaved doors primed for paint..passenger door has one hole to be filled.was for my project car.

-2002 Transam convertible complete custom box install with gloss black painted finish for 2 12" subs..ported.the port is a hand bult pontiac symbol..a must see.may fit 3rdgen convertibles aswell.

Pics are available upon request.
For more information contact
me(Regi) at 416 843 5126 or Chase at 416 750-HIFI

kaptinkafeen

WTB
holley 650-700cfm double pumper
Holley part # - 4777 (650cfm)
- 4778 (700cfm)
please pm if you have or know of someone who does.
TIA
-Andrew

DanTheAngry

Free, 10 Bolt Drum Brake Rearend.

motorheadmike

Walker Stock Replacement Exhaust:
http://www.thirdgen.org/techboard/en...ghlight=walker (91 Z28 Stock Replacement Walker Exhaust w/Cat & Y-Pipe: Toronto, Ontario Canada)

Factory 91-92 Z28 Wheels:
http://www.thirdgen.org/techboard/ex...hlight=ontario (91 Z28 Stock 16" 5-Spoke Flat Faced Wheels: Toronto, Ontario Canada)

I also have the factory 286,000km LB9 305 TPI engine out of my Z28 available. It is dirty and has a possible rod knock (which is why I pulled it). The TPI system is complete less the water neck and some bolts. There is no harness, water pump, pulleys, brackets, valve covers or sensors included. You do get a complete long block (block, crank, rods pistons, heads, rockers, roller lifters, cam, pushrods, oil pan and timing cover) and the intake setup. The engine requires a FULL rebuild (unless you are brave or a magician). It is all yours for $350 picked up. I have an engine crane at the house to get it into the back of whatever it is you care to transport it in; I'd suggest a pick-up truck.

michael_lis@whitetrashdesign.ca
H# 905-451-6804
C# 416-605-8658
or PM me here

Thanks!

player 88

World class T5 from 1991 Camaro 305 V8, car had approx 100K km. onit. Opened trans and inspected it. It had new synchros installed as some time. very good shape. $450 with factory shifter.

OEM used aluminum bell housing, form the above trans, with slave cylinder, heat shield, and release fork. $75

Steel drive shaft form above car $30

Lakewood #15020 used scatter shield bell housing for above trans or T10 with bracket for hydraulic slave cylinder for 1983-1993 Camaro/Firebird F- bodies with fork $250

I have BARE 350 small Chevy bolt 2 bolt main. Ready to be assembled bored .030 over ARP main studs, 2 piece rear main seal. fresh from the machine shop , hot tanked painted and new freeze pugs. $400 obo

Aluminum Chevy 85/86 Corvette heads. 163 CC intake ports, 58 CC chambers. casting number 14101128 approx 60-80 K on them. $300

Eagle cast steel 2-pice rearm ain seal 350 CHEVY crank NEW IN BOX, $175
Factory GM 2 piece rear main seal, FORGED steel crank STD/STD polished $200

Keith Black pistons 350 Small block Hyperutectic silv-o-lite +.030, -17 dish. Will give approx 9:1 compression ration with the above heads. Has factory rods on them with ARP bolts. Balanced Assembly has approx. 20k miles on them $150

set of re-manufactured 350 rods, combination of X and Pink rods, ARP bolts, balanced and ready to go low hours, $60

MT SBC aluminum valve covers$40
MOROSO valve cover, were gold, but are now black $40

HV oil pump, used low hours $20

misc Gaskets $50 includes 2 sets of head gaskets.
Clevite 77 main and rod bearings STD, MS-909 P and CB-663 P
$120 NEW IN BOXES
Clevite 77 main and rod bearings 10/10 MS 909 H and CB-633 H
Ran for approx 20 minutes, to break in motor. $80
Federal Mogul rod and main bearings STD 4663M and 2555CP $60 NEW in boxes
Used camshaft hyd. flat tappet vFederal Mogul CS-186R 230* dur. .480" lift 109LSA $30

Fedearal Mogul rings .030+ $50 for above pistons. NEW in BOX

Cloyes HD timing chain SBC for NON roller blocks $50

Mr gasket front pulley bolt $10 NEW in package

COMPLETE TPI EFI set up form 1988 Players series Camaro.
includes computer, harness, Accel 24# injectors, Jet adjustable fuel pressure regulator, MSD coil, distributor. , MAF air boxes

call me for a package deal!!
I can do an assembled short block for $900

Steve
cell 705-718-3483

motorheadmike

Ooooh! I got more (just imported from the US):

4 - '91 Corvette "Sawblade" 17x9.5" OEM Wheels without Center Caps ($30 B/N on eBay) - 56mm offset in good condition (there is some brake dust on them); Silver painted centers with machined outer lip; Overall a good light weight "track wheel" - $500 obo (pics available upon request)

Thanks,

michael_lis@whitetrashdesign.ca
H# 905-451-6804
C# 416-605-8658
or PM me here

Black82Z

Firebird flip up head lights from trans am 85 worked every time before pulled from vehicle. $200

Glass ttop from 85 trans am, $50

all prices obo

tire_fryer@hotmail.com

Attached Images

	stuff 040.jpg (108.8 KB, 5 views)
	stuff 042.jpg (50.1 KB, 4 views)

1irocz2nv

I'll be moving sometime next year and I don't have the room to drag both IROCs with me. This is a rolling chassis minus the rearend. So really, it's a semi-rolling chassis...lol. It was going to be a ground up restoration for me but I don't have the room for it. The floors are in great condition, no rot, just the usual rock chips with surface rust. There is no rust on this car other than a 1" spot of both of the rear out wheel wheels(it's only surface rust, no holes). Car has most of the grey panels that came with it. The wiring for the interior is still there. Other than rearend and window regulators, it should pretty much all be there.

I'm thinking $500 OBO, there's room to negotiate.

Don't hesitate to ask any questions.

Sorry about the pic. As you can see, I'm running out of room as it is.

motorheadmike

Okay I have a pair of 1.3" billet spacers available these cost me ~$300 4 years ago when our dollar sucked. Now our dollar is good and they retail for ~$150. $100 picked up.

Come Spring I will have a set of 1.25" billet spacers as well (currently on Natasha's B4C). Also $100 picked up.

Those '91 Z28 wheels I listed earlier are now $200 obo picked up.

That Walker exhaust system is now: $100 picked up.

I also have the green light on selling the factory 16x8 painted silver "snowflake" wheels from our 2002 Camaro. 2 are fully unmounted and 2 still wear worn rubber. Centre caps included: $250 picked up.
Seen here: http://whitetrashdesign.ca/images/camaro/pic%20001.jpg

EDIT: I should add that the engine is spoken for!

Zedsled

1iroc2nv, i have a few questions about the rolling chassis.What year is it,do you have all the body panels,is the wiring still installed or has it all been taken out of the car and do you know what interior panels are missing?

thanks
kyle

1irocz2nv

The chassis is an 88 IROC. The hood and fenders are gone but the rest of the body panels remain (nose, rear bumper cover, gfx, etc). The wiring is still inside and intact minus the window regulators which are gone. As far as interor panels, they're all there.

If you have any other questions, just ask.

Cheers

online170

Looking for numerically higher series 10 bolt POSI carrier from a thirdgen. Basically ALL the guts from inside the pumpkin for a 26 spline axle combo. 3.42, 3.73, that kind of thing. If gears are there, even better.

MUST BE:

1) Available in Toronto or closely surrounding area by next weekend (Feb 22-24 of 2008).
2) A 10 bolt.
3) A clutch type POSI. (no gov-locks...)

pm me, or e-mail me with what you have..... Please provide price, and pix.

Thanks

DanTheAngry

10 Bolt Drum Rearend - Free
Stock Drive Shaft - BO
Stock Rad and Fan - BO

hehehe bo...

player 88

Lakewood #15020 used scatter shield bell housing for above trans or T10 with bracket for hydraulic slave cylinder for 1983-1993 Camaro/Firebird F- bodies with fork $250

I have BARE 350 small Chevy bolt 2 bolt main. Ready to be assembled bored .030 over ARP main studs, 2 piece rear main seal. fresh from the machine shop , hot tanked painted and new freeze pugs. $350 obo

Aluminum Chevy 85/86 Corvette heads. 163 CC intake ports, 58 CC chambers. casting number 14101128 approx 60-80 K on them. $300

Eagle cast steel 2-pice rearm ain seal 350 CHEVY crank NEW IN BOX, $175 this is a 500 hp crank!! not junk!

set of re-manufactured 350 rods, combination of X and Pink rods, ARP bolts, balanced and ready to go low hours, $60

MOROSO valve cover, were gold, but are now black $40

HV oil pump, used low hours $20

misc Gaskets $50 includes 2 sets of head gaskets.
Clevite 77 main and rod bearings STD, MS-909 P and CB-663 P
$120 NEW IN BOXES
Clevite 77 main and rod bearings 10/10 MS 909 H and CB-633 H
Ran for approx 20 minutes, to break in motor. $80
Federal Mogul rod and main bearings STD 4663M and 2555CP $60 NEW in boxes
Used camshaft hyd. flat tappet vFederal Mogul CS-186R 230* dur. .480" lift 109LSA $30

Fedearal Mogul rings .030+ $50 for above pistons. NEW in BOX

Cloyes HD timing chain SBC for NON roller blocks $50

Mr gasket front pulley bolt $10 NEW in package

COMPLETE TPI EFI set up form 1988 Players series Camaro. 5 speed manual chips!
includes computer, harness, Accel 24# injectors, Jet adjustable fuel pressure regulator, MSD coil, distributor. , MAF air boxes $400

84-86 corvette wheels 16 x 8 i believe, will need spacer sot run on a 3rd gen $250

<ake me an offer for a package!
Steve
cell 705-718-3483
home 705-431-7466

rgauder

Holley Stealth Ram


Brand new in the box. $300 plus shipping.

pm me here or email: gauder4@sympatico.ca

jaron

Anybody interested in an automatic centre console out of a 1983 Pontiac Firebird?? its got two holes for power windows and the auto shifter plate, its the entire console minus bolts cuz i just put everything into one small tin and i have no idea which ones work, but im pretty open on offers so if anyone is interested, let me know at jaronpais@rogers.blackberry.net i can forward pics if need be!

jaron

sorry guys i noticed that i didnt mention that i would be keeping the power window switches...other than there here are two pics i took last night!

Attached Images

	DSC01013.JPG (635.5 KB, 15 views)
	DSC01014.JPG (646.4 KB, 5 views)

90_T/AGTA

3rd Gen T/A consol came out of my 90 t/a excellent shape-BO
4th gen bird 6 speed consol missing shifter boot-BO
85-92 T/A hood black no rust-BO

PM me if intrested in anything thanks

motorheadmike

The TPI 305 is SOLD! Big thanks to Andrew (aka kaptinkafeen) for swinging by to pick it up. I hope it does well by you, buds!

The rest is still up for sale.

__________________

rgauder

Holley Stealth Ram


Brand new in the box. $300 plus shipping. SOLD (went for $280 shipped)
pm me here or email: gauder4@sympatico.ca


Lincoln Mig Pak 10 mig welder 110v

Ran approximately 2 spools of wire through it. Comes with gas valve and regulator.

Reason for selling: Upgraded to a 220V 210amp machine for framework.

$450
Accepting Best Offers

Buy both for the best deal

The White Knight

TONS OF third gen stuff for sale

Including Lb9 305, trans (700r) and 10bolt rear.

http://ccfbg.com/forum/viewtopic.php?t=5979

eric300680

Hello There,

I`m Eric. You probably have seen my parts for sale either on kijiji, used ottawa, or isell. I still have a lot of stock parts, full front nose, z28 5 spoke rims, red and grey interior, rear bumper covers, steering columns, full dash, interior pieces and much more. Give me a call at 613-978-2954 after 4PM.

Thanks Eric

89junkyardgta

82-84 T/A Parts, Knight Rider, etc.

Some of these I have, some of these I have access to (wrecking yard)
Dashpad (looks mint)
dashboards and trim- one nice, one ok, one?
Misc door panel trim, black armrests
Knight Rider ground effects
T/A Tail lights (bird is shot, rest is good)
Spoiler
Most of this stuff is on a car in the 'yard. I can get the parts at a good price if I buy a lot...just trying to make this stuff available to people before it gets turned into trash. If people had thought this way back in the 70's, 69 Camaros might not cost $50,000! Email at p_mikodaAThotmail.com or PM me.

Thanks,

Paul