TPI Tuned Port Injection discussion and questions. LB9 and L98 tech, porting, tuning, and bolt-on aftermarket products.
Sponsored by:
Sponsored by:

My First F-Body/Car

Thread Tools
 
Search this Thread
 
Old 05-19-2002, 12:12 AM
  #1  
Junior Member
Thread Starter
 
FiveLTRetr's Avatar
 
Join Date: May 2002
Location: Mishawaka, Indiana
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
My First F-Body/Car

Hey all!! I'm 15 and even though i don't have an F-body, or car YET!!! i'm hog wild about them. When i get my L98 Preferabally in a 91-92 Formula, i wan't to scoot into the 12's can you give me any help, or suggestions :hail:

don't mean to bother,

Kirk
Old 05-19-2002, 12:21 PM
  #2  
TGO Supporter

 
MdFormula350's Avatar
 
Join Date: Nov 2001
Location: Maryland; USA
Posts: 11,634
Likes: 0
Received 3 Likes on 3 Posts
i would guess open up the air intake system a bunch (like intake runners, ported plenum, air intake mainfold), get a procharger supercharger with intercooler, and some better injectors psi wise, an adjustable fuel pressure regulator and a better high flow fuel pump. you u need to burn a new computer prom most likely also

gear wise have like 4._ _ something in the rear.

get an aluminum driveshaft

also tranny wise get a corvette servo, trans go shift kit, and a nice high torque converter like 3,500 stall.

exhaust wise get a nice freeflowing exhaust, like high flow cat(s), headers and mufflers.

suspension wise u will need new rear lower control arms, and drag springs to hook up, at least.

all this stuff will cost alot , like around 4 to 5 grand

but i would think u will be into the 12's easily

but when stuff starts to break u will need more money

to buy drivetrain components that are stronger..

Last edited by MdFormula350; 05-19-2002 at 12:31 PM.
Old 05-19-2002, 12:38 PM
  #3  
Junior Member
Thread Starter
 
FiveLTRetr's Avatar
 
Join Date: May 2002
Location: Mishawaka, Indiana
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Yeah i was planning on opening up the intake/exhaust, put some heads on and mabye a T56 6spd.Beef up the rear, And eventually, make it a stroker w/ a procharger.....And of course tons of suspension mods.

Thanks For The Input!!!

Kirk




All times are GMT -5. The time now is 09:09 PM.