TPITuned Port Injection discussion and questions. LB9 and L98 tech, porting, tuning, and bolt-on aftermarket products.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
HELP!! I got a loud violent sucking sound coming from my Elelbrock baseplate region. I put spray everywhere, and cant seem to pinpoint it. Is it the IAC, or something else? Its a 1988 formula w/FULL mods. Still have the stock chip though.. Thanks in advance!!
------------------
"Ever notice how imports sound like weedwackers"
This ad is not displayed to registered members. Register your free account today and become a member on ThirdGen!
Sponsored Links
Registered users do not see this ad. Click here to register for free!
Check your power brake booster line ti the plenum, maybe it came off or is leaking.
------------------
1988 Formula 5L/5sp 3.45 gears, SLP cold air kit, MAS gutted, TPIS air foil, TPIS AFPR, MAC headers, Mac under drive pulleys, MAC cat back, Relocated MAT.
Best ET street tires 13.85
Best 60 FT street tires 1.930
Best MPH street tires 99.29
Are you sure it's the base plate ? On mine it was the IAC that was stuck closed and it was making a VERY violent sucking sound. Sounded like I had a supercharger in there or something... LOL
my car also makes a violent sucking sound that started right after i put the edelbrock throttle body on the IAC works fine it is just the 52mm throttle body. if i put my finger over the hole to the IAC circit and wait for a minuet then release my car screams up to 3000 rpm and the sucking sound is so loud it hurts your ears.
------------------
90 iroc l98
last season best corected 13.62 @102
mods
full exhaust, AFPR, pulley, jet stage 1 chip, billet servo, 52mm throttle body and a few other little things.