TPITuned Port Injection discussion and questions. LB9 and L98 tech, porting, tuning, and bolt-on aftermarket products.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
Hows it going? I've searched all over this board for the diameters of the stock serpentine pulleys for reference purposes but found nothing so I thought I'd post them up:
Crank - 7 3/4"
Water Pump (long) - 6 1/2"
Power Steering - 6 1/2"
Alternator - 2 1/2"
Later,
Phoenix
Last edited by The_Phoenix; 03-11-2009 at 04:47 AM.
I've heard you can only reroute the serpentine belt when removing the smog pump (correct me if i'm wrong). As for the a/c delete, you're going to have to use the a/c delete pulley along with the shorter belt. hope this helps.
do you know how tall the stock tpi crank pulley is?
i was putting a paxton sc on my car and try to use a tbi crank pulley since i had underdrive pullies before, but its looks like the pulley needs to be like 1/4" taller so it can align with the rest of the accessorie's pulleys...
.
