TPITuned Port Injection discussion and questions. LB9 and L98 tech, porting, tuning, and bolt-on aftermarket products.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
Hey everyone. Me and a buddy cleaned up the top of my motor. We just finished putting everytbhing back together but we still have one mystery wire. It comes out of the stock harness and has a fusable link on it. Cant figure out where it goes.
I just put my car back together today. That looks like the same connector that I hooked up from my EGR valve. But mine was on the passengers side of the dizzy and it didnt have a fuseible link in it. See if you have a wire coming off of the EGR base. That's my guess until I can look more tomorrow.
hey bowtieboy UPDATE YOUR PROFILE SO WE KNOW WHAT WE"RE DEALING WITH HERE! and yes the only single contact connector dark green wire on the harness is for the EGR temp sensor. judging from the pic, you probably broke the sensor. if so you have problems, discontinued part bud