TPITuned Port Injection discussion and questions. LB9 and L98 tech, porting, tuning, and bolt-on aftermarket products.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
please just delete this and send me in the right direction through a pm if this is a repeated post, but i did a search and could not find an answer...
can i use an LT1 throttle body on my TPI? and is it an improvement or is the LT1 a 48mm TB also?... thanks for any help and i apologize if this is an inconvenience for anyone
__________________ u call it "drifting"? i call it a lack of proper traction, the fastest way around the track isnt sideways with the tires smoking (well, most of the time). oh yeah japan makes the best race bikes, but the cars are for transportation. and thats, your new opinion!
Stock TB on an LT1 is 48mm also...don't think you would gain anything from doing the swap. We usually go to a 52mm TB...bore out the stocker and what not as the 58 tends to be a bit much unless you have serious head/intake/exhaust work to flow that much.
thanks so much thats exactly the info i was lookin for
__________________ u call it "drifting"? i call it a lack of proper traction, the fastest way around the track isnt sideways with the tires smoking (well, most of the time). oh yeah japan makes the best race bikes, but the cars are for transportation. and thats, your new opinion!
and thats, your new opinion!
