| Re: Code 32! can I remove my egr and block it?
1) If you remove anything from the EGR system, you will keep seeing code 32. It is a code to indicate that the EGR system is not functioning correctly.
2) If you want to disable the EGR system, you need to change it on the memcal in the ECM. You will need a tuning laptop and a new EPROM chip for that.
3) There are many components in the EGR system, any of them can be faulty. Instead of throwing money at the problem and swapping part by part, hoping that it solves your problem, diagnose it first to see WHICH component is causing the code 32. I know from experience that diagnosis is crucial, otherwise you'll be chasing your tail. My EGR had a BOLT stuck in one of the hoses, from the previous hillbilly dumbass ******* owner.
There are multiple write-ups on the EGR system here on TGO, just do a search and you'll find lots of information. Follow the diagnostic diagram and it will help you find the cause of your problem.
Hope this helps.
Lou
__________________
'91 Z28 convertible w/305TPI WC T5 (no more auto)
"Nothing screams more of poor craftsmanship than wrinkles in your duct tape!" | 
