#1 Junior Member
Join Date: Jan 2007
Posts: 5
What afr heads that will go with my setup
1988 pontiac gta transam 350 tpiAFR# 1034 - 195cc Heads, Straight Plug, 65cc, .600 lift
__________________
#2 Senior Member
Join Date: Apr 2002
Location: louisville, co
Posts: 372
Car: 86 T/A
Engine: 383
Transmission: ProBuilt 700R4 2800 Stall
Axle/Gears: 3.27 9 bolt
Re: What afr heads that will go with my setup
Still running the stock flat top pistons?
#3 Junior Member
Join Date: Jan 2007
Posts: 5
Re: What afr heads that will go with my setup
still running the stock pistons that is correct.
__________________
#4 Senior Member
Join Date: Apr 2002
Location: louisville, co
Posts: 372
Car: 86 T/A
Engine: 383
Transmission: ProBuilt 700R4 2800 Stall
Axle/Gears: 3.27 9 bolt
Re: What afr heads that will go with my setup
1040's
#5 Senior Member
Join Date: Jul 2006
Location: Palmdale, CA.
Posts: 724
Car: '91 Z28 L98 G92
Engine: Modded L98
Transmission: Modded 700R4
Axle/Gears: Modded 10-Bolt
Re: What afr heads that will go with my setup
I used 1034's, milled to achieve 62cc combustion chambers. The cam you describe sounds like the Comp XFI268.
__________________
1991 Camaro Z28 - L98 G92 G80 N10 B2L J41- Stock short-block, HSR w/BO91 EGR Mod
,
Modded Air Lid, BBK 58mm TB, AFR 195 Eliminator Heads, Comp 280XFI cam, Crane Gold 1.6:1 roller rockers, AFR Hydra-Rev Kit, 30# injectors, Kirban AFPR, EP381 fuel pump, Dyno Don's headers & exhaust, Kevin91Z Tune, Yank SS4000 stall, Pro Built S/S 700R4, JG1 Driveshaft, 3.73:1 Axle, TA girdle / diff cover, (Real) Front Brakes, Hurst Dual Gate shifter
, Dyno Don's SFC's, LCARB's, Boxed LCA's, KYB struts & shocks...
**Original & FINAL Owner
**
Last edited by Burnout91; 11-21-2009 at 02:40 PM .
#6 Senior Member
Join Date: Apr 2002
Location: louisville, co
Posts: 372
Car: 86 T/A
Engine: 383
Transmission: ProBuilt 700R4 2800 Stall
Axle/Gears: 3.27 9 bolt
Re: What afr heads that will go with my setup
How is the clearance with the straight plug angle with your headers? I have the 1038's on my 383 and have plenty of room around the primarys.
#7 Senior Member
Join Date: Jul 2006
Location: Palmdale, CA.
Posts: 724
Car: '91 Z28 L98 G92
Engine: Modded L98
Transmission: Modded 700R4
Axle/Gears: Modded 10-Bolt
Re: What afr heads that will go with my setup
Good plug - to - header clearance. Easy plug changes with a short sparkplug socket; plenty of sparkplug wire boot clearance using MSD 90* plug terminals.
#8 Junior Member
Join Date: Jan 2007
Posts: 5
Re: What afr heads that will go with my setup
Quote:
Originally Posted by
Burnout91 I used 1034's, milled to achieve 62cc combustion chambers. The cam you describe sounds like the Comp XFI268.
that is correct. lol. i dont know what clearance i would have with the headers if i put on if i use straight angle. Would that make a difference if i go with angled?
#9 Senior Member
Join Date: Jul 2006
Location: Palmdale, CA.
Posts: 724
Car: '91 Z28 L98 G92
Engine: Modded L98
Transmission: Modded 700R4
Axle/Gears: Modded 10-Bolt
Re: What afr heads that will go with my setup
I would suggest calling AFR to discuss your head / header combo and get their advice. I don't have any experience with any other headers & AFR straight plug heads; the heads & headers went on my motor at the same time.
#10 Moderator
Join Date: Jul 2001
Location: Buffalo, NY
Posts: 4,699
Car: 1988 IROC-Z
Engine: H/C/I L98
Transmission: Modified 700R4
Axle/Gears: Moser 12 Bolt / 3.73 TrueTrac
Re: What afr heads that will go with my setup
I have the 1040's milled to 62cc. Very happy. Good spark plug clearance with my 2055's.
__________________
1988 IROC-Z / 2007 R6 (Full exhaust | PCV | Flush Mounts |Tinted Windscreen | Fender Eliminator | Frame Sliders) [Idle Clip]
#11 Senior Member
Join Date: Aug 2007
Location: West Lafayette, IN
Posts: 252
Car: '85 Irocz
Engine: LS1
Transmission: 4L60E
Axle/Gears: 3.23
Re: What afr heads that will go with my setup
I had this exact same question since I have the xfi268 as well, thanks for starting the thread OP!
__________________
ThirdGen
1992 Camaro
Paid Advertisement
Tags 1034 , 1036 , 1040 , 195 , 195cc , 383 , 62cc , 75cc , afr , afr1034 , dons , dyno , eliminator , headers , heads , sbc , tpi
Thread Tools Search this Thread
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
,
**
