TPITuned Port Injection discussion and questions. LB9 and L98 tech, porting, tuning, and bolt-on aftermarket products.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
I need to buy a new fuel pump for my 88 305 automatic. & last time it got changed, it would cach air on hard turns with low fuel. How can I prevent this from happening again? & what would be the best choice in pumps.
a/c delco pump, theres a pulsator that the pump connects to. Theres a little hose included with the pump, replace the pulsator with the hose and i recommend special fuel clamps that clamp permanently. Also when you get the strainer point it in the slump. it should help.
The pump is not why it catches air while you turn with low fuel. You need a baffled gas tank. Some f-bodies came with them. I know 1le and b4c cars did but not sure what other models did or if you can by an aftermarket stock style tank. If you keep more fuel in there it shoudn't do it, but not much you can do with the tank you have. There might be a way to mod it and add baffles but not sure. But do buy a good pump, an ac delco or bosch or gm. don't buy a cheap brand, you'll regret that.
__________________ "Wide open 'till you see GOD, then brake!!"
'91 Camaro RS B4C Police Special Service Package
350 4-bolt, 10:0 w/moly rings, Holley Stealth Ram (ported), BBK 58mm, MSD ignition, Procomp heads 2.02 1.60 200cc (63hrs. port work), 30# venom injectors, Flowtech headers, full custom 3.5" mandrell ceramic exhaust w/ aerochamber, Comp cam XFI280HR (.576/.571 234/244), PCMforLESS.com tune, 58mm BBK, Custom TPI air lid, Custom RamAir, 1.6 stainless steel rollers, Custom 700-r4 2500 stall, Aluminum Drive line, 3.23 posi, Moser axles w/stud girdle cover, Spring works springs (lowered), UMI relocation brackets, panhard, LCAs, sub-frame connector, boxed A-arms, Poly bushings, Custom interior, Powdercoated & polished IROC wheels, Custom "Black Cherry" Paint", 4pt. roll bar, +++ more! "It's not the tires squealing, it the asphault SCREAMING!!"
"It's not the tires squealing, it the asphault SCREAMING!!" 
