89fast5oh

The o-ring on the metal portion of the fuel lines where they connect to the rubber lines are looking pretty bad. What are the proper part number for this application?





I have found the following part numbers: 22514722 & 22516256. Do those look like the right ones?

mmadden55

Just get a box of assorted and use the one that fits.

vetteoz

iTrader: (13)

Have to be special fuel rated O rings ; not the reg type found in the assorted ring kits

Can you cross reference your par # against the correct size required as listed in link ?
http://webpages.charter.net/khasting...uelsystem.html

89fast5oh

They cross over and measure out to 3/8" and 5/16" o-rings.

RockAuto shows the part # and size here:

http://www.rockauto.com/catalog/rafr...rttype=1000952

Even shows a picture and it looks like them. Just wanted to make sure that those are indeed the correct parts.

Now to see if my local NAPA can get these o-rings.

eseibel67

I work for the manufacturer that supplies engine management parts to NAPA. The part # you want is 2-18416.

89fast5oh

I found the Dorman o-ring kit today at my local parts store. Part number 800-013

BOSS 357

iTrader: (1)

deleted