Fuel injector ohms
#1
Senior Member
Thread Starter
Join Date: Nov 2008
Location: Las Vegas, Nevada
Posts: 586
Likes: 0
Received 1 Like
on
1 Post
Car: 1988 Trans Am GTA
Engine: 350TPI
Transmission: 700R4
Axle/Gears: 3:27
Fuel injector ohms
Hey there guys I tested my injectors with my multimeter because my 92 L98 is not passing smog and has a slight hesitation when taking off. From my understanding all the injectors are supposed to test out to be around 16.5 ohms. My issue is the passenger side all tested to be 17, the two front driver sides tested 8.5 and the two rear driver side tested 11.5 ohms. What is the deal, does the driver side have mis matched injectors or something? I just bought the car and am having issues passing smog and have a slight hesitation taking off. What should I do? replace them?
#2
Moderator
iTrader: (1)
Join Date: Mar 2002
Location: Chasing Electrons
Posts: 18,401
Likes: 0
Received 215 Likes
on
201 Posts
Car: check
Engine: check
Transmission: check
Re: Fuel injector ohms
Just luck of the draw. Each bank has it's own fuse for power. But all eight injectors are driven by the one driver in the ECM. Although each bank gets it's own wire from the ECM (exits on two pins).
Time to replace them and enjoy the better running engine.
RBob.
Time to replace them and enjoy the better running engine.
RBob.
#5
Senior Member
iTrader: (1)
Join Date: Sep 2003
Location: St. Louis, Missouri
Posts: 988
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Firebird Formula
Engine: 383 Stealth Ram
Transmission: 700R4
Axle/Gears: 3.73 9 bolt Posi
Re: Fuel injector ohms
Replace them! And keep in mind that, checking injectors with an ohm meter means your checking the resistance... you can still have injectors fail mechanically and ohm fine.
Hope this helps!
Hope this helps!
Thread
Thread Starter
Forum
Replies
Last Post
New2Chevy
Engine/Drivetrain/Suspension Parts for Sale
6
10-04-2015 11:27 PM
Firechicken86
Engine/Drivetrain/Suspension Parts for Sale
0
08-12-2015 10:07 PM