TPI Tuned Port Injection discussion and questions. LB9 and L98 tech, porting, tuning, and bolt-on aftermarket products.
Sponsored by:
Sponsored by:

running rich 350 to 383 tpi swap

Thread Tools
 
Search this Thread
 
Old 08-17-2014, 07:36 PM
  #1  
Junior Member
Thread Starter
 
drdpr72's Avatar
 
Join Date: Oct 2013
Location: fall river,ma
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Car: 89 iroc
Engine: 383 tpi
Transmission: t5
Axle/Gears: 327 9bolt
running rich 350 to 383 tpi swap

89 5.7 tpi to mild 383 tpi lots of bolt ons vehicle seems to be running very rich plugs black/damp exhaust is white smoke on start smells rick popping in exhaust 02 reading stuck on rich mat and coolant temps seem to be ok unplugged maf sensor vehicle died instant started a few times until it ran with maf disconnected then plugged it back in seem to run much better live data shows o2 lean to rich at this point then when to check timing disconnected adv wire car went to rich on data log even after adjustments made and wire plugged in will not come back off rich? lost not sure where to go at this point very new at tpi but testing everything I can think off btw factory ecu with hypertec prom I don't have any stock proms to compare running? please help
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MustangBeater20
TBI
11
10-29-2022 09:20 PM
Azrael91966669
DIY PROM
25
06-20-2017 04:04 AM
st.evel07
Engine Swap
5
08-13-2015 06:15 PM
85Iroc-Z
Power Adders
18
08-13-2015 01:58 AM
squiggy2
TPI
4
08-09-2015 09:30 PM



Quick Reply: running rich 350 to 383 tpi swap



All times are GMT -5. The time now is 12:44 AM.