EVAP canister with Mono blade throttle body
08-19-2014, 07:16 PM
#1
Junior Member
Thread Starter
Join Date: Aug 2006
Location: Canada
Posts: 43
Received 0 Likes
on
0 Posts
Car: 1983 Camaro Z28
Engine: 355 Tuned Port with Vortec Heads
Transmission: T56 six speed
Axle/Gears: 373 10-bolt
EVAP canister with Mono blade throttle body
Hello Thirdgen's
I wanted to say thank you for all the help on this forum. I've been on here for years now and I wouldn't have been able to mod my car without the help from you guy's.
After 13+ years, my car is almost finished now. At the moment I'm hooking up vacuum lines and I'm unsure of what I should do with the EVAP canister line. I have a 1300cfm mono blade tb from TPIS...I think it's 1300 anyway. I bought it years ago off of Ebay. I decided long ago that I was going to keep the canister because I didn't want the gas smell if I git rid of it and I didn't want an empty spot if it was gone...that's just me, it's what I decided.
This throttle body has no hookup for the evap canister. Does anybody know what I should do with the line that goes from the canister to the tb? Can I plumb it in another way?...I've been searching but haven't found an answer yet!
Thanks for the help.
Just want to give John in RI a shout out! He's helped me a lot.
I wanted to say thank you for all the help on this forum. I've been on here for years now and I wouldn't have been able to mod my car without the help from you guy's.
After 13+ years, my car is almost finished now. At the moment I'm hooking up vacuum lines and I'm unsure of what I should do with the EVAP canister line. I have a 1300cfm mono blade tb from TPIS...I think it's 1300 anyway. I bought it years ago off of Ebay. I decided long ago that I was going to keep the canister because I didn't want the gas smell if I git rid of it and I didn't want an empty spot if it was gone...that's just me, it's what I decided.
This throttle body has no hookup for the evap canister. Does anybody know what I should do with the line that goes from the canister to the tb? Can I plumb it in another way?...I've been searching but haven't found an answer yet!
Thanks for the help.
Just want to give John in RI a shout out! He's helped me a lot.
Last edited by 355sbcTPI; 08-19-2014 at 07:21 PM.
08-19-2014, 08:56 PM
#2
Supreme Member
iTrader: (8)
Join Date: Oct 2001
Location: Il
Posts: 11,682
Received 745 Likes
on
505 Posts
Car: 1989-92 FORMULA350 305 92 Hawkclone
Engine: 4++,350 & 305 CIs
Transmission: 700R4 4800 vig 18th700R4 t56 ZF6 T5
Axle/Gears: 3.70 9"ford alum chunk,dana44,9bolt
Re: EVAP canister with Mono blade throttle body
Pic of said throttle body?
08-20-2014, 09:00 AM
#3
Junior Member
Thread Starter
Join Date: Aug 2006
Location: Canada
Posts: 43
Received 0 Likes
on
0 Posts
Car: 1983 Camaro Z28
Engine: 355 Tuned Port with Vortec Heads
Transmission: T56 six speed
Axle/Gears: 373 10-bolt
Re: EVAP canister with Mono blade throttle body
Here it is. My engine bay is still work in progress but almost complete!
Last edited by 355sbcTPI; 08-20-2014 at 09:49 AM.
08-20-2014, 03:18 PM
#4
Junior Member
Thread Starter
Join Date: Aug 2006
Location: Canada
Posts: 43
Received 0 Likes
on
0 Posts
Car: 1983 Camaro Z28
Engine: 355 Tuned Port with Vortec Heads
Transmission: T56 six speed
Axle/Gears: 373 10-bolt
Re: EVAP canister with Mono blade throttle body
Here is a couple more side pic's.
08-20-2014, 09:28 PM
#5
Supreme Member
iTrader: (8)
Join Date: Oct 2001
Location: Il
Posts: 11,682
Received 745 Likes
on
505 Posts
Car: 1989-92 FORMULA350 305 92 Hawkclone
Engine: 4++,350 & 305 CIs
Transmission: 700R4 4800 vig 18th700R4 t56 ZF6 T5
Axle/Gears: 3.70 9"ford alum chunk,dana44,9bolt
Re: EVAP canister with Mono blade throttle body
The only pic of it is to small to see anything. I have put a small filter on the evap hose and put it in the airbox housing.
08-20-2014, 09:32 PM
#6
Junior Member
Thread Starter
Join Date: Aug 2006
Location: Canada
Posts: 43
Received 0 Likes
on
0 Posts
Car: 1983 Camaro Z28
Engine: 355 Tuned Port with Vortec Heads
Transmission: T56 six speed
Axle/Gears: 373 10-bolt
Re: EVAP canister with Mono blade throttle body
I'm at work right now, I'll post larger pic's later
08-21-2014, 02:31 PM
#7
Junior Member
Thread Starter
Join Date: Aug 2006
Location: Canada
Posts: 43
Received 0 Likes
on
0 Posts
Car: 1983 Camaro Z28
Engine: 355 Tuned Port with Vortec Heads
Transmission: T56 six speed
Axle/Gears: 373 10-bolt
Re: EVAP canister with Mono blade throttle body
bigger pic's
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
05-10-2023 07:19 PM
gixxer92
Engine/Drivetrain/Suspension Parts for Sale
5
09-01-2015 04:32 PM
mdtoren
Tech / General Engine
0
08-16-2015 05:45 PM
