Need the flywheel for a 383/ T-56 combo - Third Generation F-Body Message Boards

		Third Generation F-Body Message Boards > Tech Boards > Transmissions and Drivetrain
Need the flywheel for a 383/ T-56 combo

Register

Forgot Password?

Transmissions and Drivetrain Need help with your trans? Problems with your axle?

Welcome to ThirdGen.org!

Welcome to ThirdGen.org.

You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!

Thread Tools

Search this Thread

09-27-2002, 01:30 AM

Berlinetta

Member

Join Date: Jul 2001

Location: Rhome, Tx

Posts: 397

Classifieds Rating: (0)

Need the flywheel for a 383/ T-56 combo

Where can i buy a flywheel that will work with the 383 one piece rear main seal and work with the aftermarket T-56 im buying?

__________________
85 Berlinetta Auto, 2.8L MPFI<--w/ overhead console AND flashlight
91 RS 5.0 TBI, Auto, 14x3 open Element K&N, cat removed, Flowmaster 80 series <--- shes about to make her triumphant return to the road
91 Ford F-150, 4.9L I6, 5-speed

"Not enough time, not enough money, and just too many mustangs in the world"

Kills: 81 T/A 4.9L w/ cam & exhaust upgrade
79? Camaro

09-28-2002, 01:25 AM	#2
JoelOl75 Senior Member Join Date: Jan 2001 Location: PA Posts: 1,978 Car: 88 Firebird WS6 Engine: 350 TPI Transmission: T56 Axle/Gears: 3.42 Classifieds Rating: (0)	McLeod, Summit and Centerforce all have flywheels for this combo. __________________ '88 Camaro RS 2.8L (Soon to be 350) & '88 Formula 388 -10.9:1 CR -Eagle Rotating Assm -KB Pistons -T56 transmission, McLeod dual friction clutch, Centerforce flywheel, 3.42 Richmond gears on a Torsen 'posi' -Cam Specs: Single pattern, 292 adv duration, 234 @ .050", .488" lift, 114 LSA -Heads: Trick Flow Aluminum, 195cc, angle plugs, 64cc chamber -Induction: Fully siamesed plenum, SLP runners and intake (2" to head opening) no EGR 24# Ford SVO injectors@52psi, Edelbrock 58mm TB, Gutted MAF, K&N filter, modified can, tweaked AJUN BIN -Exhaust: SLP 1.75" headers, SLP 3" Cat-Back -Chassis: Lakewood LCA's, Home-made torque arm w/Rod end mount, Home-made panhard rod, STB & SFC's

09-28-2002, 01:25 AM

ThirdGen

1992 Camaro

Paid Advertisement

		Third Generation F-Body Message Boards > Tech Boards > Transmissions and Drivetrain
Need the flywheel for a 383/ T-56 combo

« Removing tranny - PITA???? | Camaro T56 swap into 4X4 S10 »