driveshafts for 1350 pinion yoke rear - Third Generation F-Body Message Boards

mikeu90rs · 01-23-2004, 09:29 AM

I've done some searches and found plenty of options on what I can go with for driveshafts on a stock rear. But what I haven't found (here or anywhere) is who makes driveshafts that will fit a 1350 series pinion yoke. The only company that I know makes one is Spohn, but I was hoping to get an aluminum one. I need a shaft that will fit a G-Force T5 (stock output shaft) at one end, and a Moser 12 bolt at the other (already got 1350 series yoke with it). Thanks for any help you guys can provide.

RB83L69 · 01-23-2004, 09:42 AM

You could also either use one of hte special U-joints you can get from Lakewood and others, that have 2 different size ends; or get teh 3147X yoke (1310 series) for your 12-bolt.

novass · 01-23-2004, 10:24 AM

you could get one from http://www.dennysdriveshaft.com/ he is a local guy for me, however, he makes shafts for all over the world. Nice guy, good product.

Apeiron · 01-23-2004, 12:06 PM

The stock aluminum shaft has a 1310 yoke on it, any driveline shop should have a 1310/1350 joint on the shelf. I use a stock aluminum shaft and my rear has a 1330 yoke and I've never had trouble getting something to fit.

I just looked it up, a Spicer 5-460X, Neapco 3-3140 or Precision 348 would fit.

IronbackTA · 01-23-2004, 05:33 PM

Inland aluminum shafts are 1350, at least mine is. Had to use a bastard u-joint until I went to a Dana 44.