Moser 9" housing... - Third Generation F-Body Message Boards

dennis6 · 03-10-2004, 03:13 AM

What would this rear housing need to be a bolt in for my stock rear? I have a 91 RS that is getting a 455 Buick transplant. It has drum brakes at the moment. I need to do this as cheap as possible and use as many ebay/used parts as I can.

http://www.moserengineering.com/cata....asp?ItemID=31

"Part #: 7H9FBT
GM "F" Body Housing WITH Torque Arm Brkt
$585 "

ede · 03-10-2004, 06:05 AM

nothing it should be a direct bolt in

MrDude_1 · 03-10-2004, 08:49 AM

if you get that housing with the TQ arm bracket, and the axles that go with it... you can then get a used/ production 9" to drop into it....

swap the U joint on the driveshaft to a "conversion" one that will mate the shaft to the 9" and you should be set.

thats the idea atleast... i would go that route, but i have other things i need to do first.

dennis6 · 03-10-2004, 02:26 PM

Quote:

Originally posted by MrDude_1
if you get that housing with the TQ arm bracket, and the axles that go with it... you can then get a used/ production 9" to drop into it....

swap the U joint on the driveshaft to a "conversion" one that will mate the shaft to the 9" and you should be set.

thats the idea atleast... i would go that route, but i have other things i need to do first.

Nice, thanks.