Search



Go Back   Third Generation F-Body Message Boards > Tech Boards > Transmissions and Drivetrain
Register Forgot Password?

Transmissions and Drivetrain Need help with your trans? Problems with your axle?
Sponsored by Hughes Performance
Click Here

Welcome to ThirdGen.org!
Welcome to ThirdGen.org.

You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!


Reply
 
Thread Tools Search this Thread
Old 12-31-2004, 12:15 PM   #1
Senior Member
 
Join Date: Jul 2001
Location: SYLVANIA,OHIO,USA
Posts: 515
Car: 86 TA

Classifieds Rating: (0)

non lock up torque converter in a lock up tranny

I want to get a non lock up TC for my car but will it work sense my car had lock up end the tranny was made for lock up. I took the computer out and all the wiring for it also.
__________________
86 TA
Duke901 is offline vBGarage Page   Reply With Quote
Old 01-01-2005, 11:06 AM   #2
Senior Member
 
Join Date: Jul 2001
Location: SYLVANIA,OHIO,USA
Posts: 515
Car: 86 TA

Classifieds Rating: (0)

anyone?
Duke901 is offline vBGarage Page   Reply With Quote
Old 01-01-2005, 07:59 PM   #3
Supreme Member
 
Join Date: Jan 2001
Location: Evansville,IN,USA
Posts: 2,009
Car: 89' T/A, 00' Firehawk
Engine: 406 Roller
Transmission: TH700R4 w/2800 stall
Axle/Gears: 3.23 Posi

Classifieds Rating: (5)

I am pretty sure you have to buy a kit so you can use a non lockup convertor. I know trans go has them available.
LilJayV10 is offline vBGarage Page   Reply With Quote
Old 01-01-2005, 10:58 PM   #4
Senior Member
 
Join Date: Jul 2001
Location: SYLVANIA,OHIO,USA
Posts: 515
Car: 86 TA

Classifieds Rating: (0)

Would it be cheaper to just buy a lock up TC and just not use the lock up, sense i dont have a computer for it to work with.
Duke901 is offline vBGarage Page   Reply With Quote
Old 01-02-2005, 12:21 AM   #5
Senior Member
 
305q_ta86's Avatar
 
Join Date: Aug 2004
Location: Calgary, AB
Posts: 1,989
Car: 1993 Nissan 240sx
Engine: Turbo KA24DE
Transmission: 5 spd
Axle/Gears: 4.08 VLSD

Classifieds Rating: (1)
Why do you want a non-lockup?
__________________


>1986 Trans Am - 305 LG4 - 700R4 - Electric cutout - no cat - 180* 'stat - Manual fan switch - Open element - Trans cooler - Crane 1.6 rockers - Comp 981 valvesprings
My Cardomain page / My other cardomain page for my 87 v6


-Ryan
305q_ta86 is offline vBGarage Page   Reply With Quote
Old 01-02-2005, 08:03 AM   #6
Supreme Member
 
greezemonkey's Avatar
 
Join Date: Jan 2004
Location: The "D"
Posts: 1,744
Car: A Portly 85 Z28
Engine: 4.530 X 4.250 BBC
Transmission: under rated for this application
Axle/Gears: also under rated

Classifieds Rating: (13)

There is a valve in the front pump that will need to be changed, most transmission supply shops should have it or are able to obtain one for you..it`s accesible thru the pan. Dayrel Young products is the one I used, it was 22$ and took about 2 mintues to install with the trans out. I don`t need no lock up..just something else to break
__________________

THE MACHINE
9.03 @ 150.89 on C12 ALL MOTOR BOOYAHHH!!
greezemonkey is offline vBGarage Page   Reply With Quote
Old 01-02-2005, 12:17 PM   #7
Senior Member
 
Join Date: Jul 2001
Location: SYLVANIA,OHIO,USA
Posts: 515
Car: 86 TA

Classifieds Rating: (0)

Do you have a part number for it, also do you know if B&M has that part.
thank u
Duke901 is offline vBGarage Page   Reply With Quote
Old 01-02-2005, 03:56 PM   #8
Supreme Member
 
greezemonkey's Avatar
 
Join Date: Jan 2004
Location: The "D"
Posts: 1,744
Car: A Portly 85 Z28
Engine: 4.530 X 4.250 BBC
Transmission: under rated for this application
Axle/Gears: also under rated

Classifieds Rating: (13)

I`ll see if I can dig it up, here`s a kit TPI sells for about the same price...non lock up valve
greezemonkey is offline vBGarage Page   Reply With Quote
Old 01-02-2005, 08:22 PM   #9
Senior Member
 
Join Date: Jul 2001
Location: SYLVANIA,OHIO,USA
Posts: 515
Car: 86 TA

Classifieds Rating: (0)

Alright thank u
Duke901 is offline vBGarage Page   Reply With Quote
Old 01-03-2005, 07:23 AM   #10
Junior Member
 
Join Date: Oct 2003
Location: Columbia City, In
Posts: 29
Car: 1989 Trans Am
Engine: 305 TPI
Transmission: 700r4

Classifieds Rating: (0)
What is the need for a lock up vs. non lock up?
thinslice is offline vBGarage Page   Reply With Quote
Old 01-03-2005, 01:31 PM   #11
Supreme Member
 
Join Date: Dec 2003
Location: Newark, DE
Posts: 2,391
Car: '86 Camaro, '02 WRX, '87 K5, '67
Engine: 350 TPI, 2.0turbo, 383 in the works, 289-4BBL, 232, A-head 4-cylinder
Transmission: T56, 5-speed, 700R4, C4, T176, semi-auto 2-speed
Axle/Gears: 3.73, 3.90, 4.88, 3.55, 3.54, 7.00

Classifieds Rating: (0)
Lockup is soley a gas milage booster on the highway. It eliminates the slippage in the converter by using a clutch to effective lock the two halves of the converter together. This also reduces heat, because there is no slippage.

Do you need it? That depends on you. In a mildly modified car that sees a lot of street use, or is a daily driver then it's nice to have. In a street/strip car or heavily modified car it's one more thing to go wrong, and the good lockup converters are very expensive.

What's your normal cruise RPM on the highway? If it's more than the stall speed of the converter it won't matter if it's lockup or non-lockup. If it's less, then a lockup converter will save you some gas.

I went non-lockup when I rebuilt the trans for my Blazer. I'm running a 2,400 stall, 4.88:1 gears, and 38.5" tires. At 80MPH I'll be just at the stall speed. Good enough for me, and I saved $250 on the converter.
TKOPerformance is offline vBGarage Page   Reply With Quote
Old 01-12-2005, 09:27 AM   #12
Junior Member
 
Join Date: Oct 2003
Location: Columbia City, In
Posts: 29
Car: 1989 Trans Am
Engine: 305 TPI
Transmission: 700r4

Classifieds Rating: (0)
Ok, I understand that. Now what if I go from a TPI motor with a computer to a carbed motor, Ohh and my torque coverter is stock. What would I need to get my converter to lock in and out.
thinslice is offline vBGarage Page   Reply With Quote
Old 01-12-2005, 02:37 PM   #13
Supreme Member
 
Join Date: Dec 2003
Location: Newark, DE
Posts: 2,391
Car: '86 Camaro, '02 WRX, '87 K5, '67
Engine: 350 TPI, 2.0turbo, 383 in the works, 289-4BBL, 232, A-head 4-cylinder
Transmission: T56, 5-speed, 700R4, C4, T176, semi-auto 2-speed
Axle/Gears: 3.73, 3.90, 4.88, 3.55, 3.54, 7.00

Classifieds Rating: (0)
You just need a TC lockup kit, which is basically a relay that gets wired in to the plug on the side of the trans and the brake switch. Very easy to install.
TKOPerformance is offline vBGarage Page   Reply With Quote
Old 01-12-2005, 11:16 PM   #14
Senior Member
 
Join Date: Jul 2001
Location: SYLVANIA,OHIO,USA
Posts: 515
Car: 86 TA

Classifieds Rating: (0)

Sense im planing on getting a 3000 stall for my combo and I wont have lock up, will it be all right to drive under the stall? I will only have a 342 gear for now, I know driving on the street I wont be at or over that stall speed. Will I have to get better gears like 410 or higher?
Duke901 is offline vBGarage Page   Reply With Quote
Old 01-13-2005, 01:22 PM   #15
Supreme Member
 
Join Date: Dec 2003
Location: Newark, DE
Posts: 2,391
Car: '86 Camaro, '02 WRX, '87 K5, '67
Engine: 350 TPI, 2.0turbo, 383 in the works, 289-4BBL, 232, A-head 4-cylinder
Transmission: T56, 5-speed, 700R4, C4, T176, semi-auto 2-speed
Axle/Gears: 3.73, 3.90, 4.88, 3.55, 3.54, 7.00

Classifieds Rating: (0)
No, you don't have to keep your RPM over the stall speed. Definately install a big trans cooler though. While driving at RPM under the stall speed the converter will be slipping and generating a good amount of heat. Running a cooler will keep the temperature under control and make sure you don't damage the trans.

You'll need to modify the trans to run without lockup too. TransGo and others have a kit to delete the lockup function. It's a plug that goes in the pump. Then you can remove all the wiring from inside the trans. Leave the through case plug though or you'll get a leak.

A trans temp gauge is another good idea. Ideally you can run two sending units. One in the supply line to the cooler and one in the return line, and toggle between them with a switch. This'll tell you how well your cooler is working, as well as if the trans is too hot.
TKOPerformance is offline vBGarage Page   Reply With Quote
Old 01-13-2005, 01:22 PM
ThirdGen
1992 Camaro




Paid Advertisement


Reply

Go Back   Third Generation F-Body Message Boards > Tech Boards > Transmissions and Drivetrain

Tags
1986, 2004r, car, converter, driv, highway, kit, lock, lockup, nonlock, run, speed, stall, torque, trans
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

 


1982 Camaro '82 || 1983 Camaro '83 || 1984 Camaro '84 || 1985 Camaro '85 || 1986 Camaro '86 || 1987 Camaro '87 || 1988 Camaro '88 || 1989 Camaro '89 || 1990 Camaro '90 || 1991 Camaro '91 || 1992 Camaro '92


All times are GMT -5. The time now is 05:43 AM.


Powered by vBulletin® Version 3.7.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
All content copyright 1997 - 2014 ThirdGen.org. All rights reserved. No part of this website may be reproduced without the expressed, documented, and written consent of ThirdGen.org's Administrators.

Emails & Contact Details