Kinda a backwards tranny question..
#1
Senior Member
Thread Starter
Join Date: Jul 2003
Location: Cleveland, OH
Posts: 770
Likes: 0
Received 1 Like
on
1 Post
Car: 25th Anniversary RS
Engine: 305 TBI
Transmission: 700R4
Axle/Gears: Stock 2.73s for now..
Kinda a backwards tranny question..
I know that this question has been posed in many ways many many times... I just want to be sure that I am understanding everything that I have read correctly before I get going on this.
I am swapping an older 700r4 (with a rebuild kit installed) into my car which now currently has a 700r4 from 1992. Therefore I have an electronic speedo. Can I pull the "VSS" (which i'm assuming stands for Variable Speed Sensor) out of my current tranny when I start the swap and install it into the older one?
I appologize for asking this as I know it has been talked about many times, but I have done my searching and I am still confused.
I am swapping an older 700r4 (with a rebuild kit installed) into my car which now currently has a 700r4 from 1992. Therefore I have an electronic speedo. Can I pull the "VSS" (which i'm assuming stands for Variable Speed Sensor) out of my current tranny when I start the swap and install it into the older one?
I appologize for asking this as I know it has been talked about many times, but I have done my searching and I am still confused.
Last edited by DigitalMonarch0; 02-14-2005 at 02:10 PM.
#4
Moderator
Join Date: Aug 2004
Location: Nanticoke, Pa
Posts: 1,367
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 Firebird
Engine: 406 CI
Transmission: Pete K 700R4
Axle/Gears: 3:55
YES. Swap it out. Be sure to check the color of the speedometer gear on the output shaft. It should be the same as the gear on the 92 trans. If not swap them too.
Thread
Thread Starter
Forum
Replies
Last Post
TinnMann2
Canadian Region
16
06-18-2017 05:10 PM
HoosierinWA
Tech / General Engine
5
10-07-2015 10:15 AM