Transmissions and DrivetrainNeed help with your trans? Problems with your axle?
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
the fourth gen v-6 came with a t-5. but the bell housing was different. you need to use a bell housing from a v-8 camaro or f-bird. I do know you need a v-8 bell housing to mount up a t-5, as the v-6 is a totally different bolt pattern.
I saw on ebay once an sbc bellhousing with what looked very much like the ford t5 pattern, if it was any different the naked eye couldn't tell. I should also say that it was from a production car, not aftermarket
No guys, the tranny came out of a '96 v6 camaro. I beleive its a W/C t5. and yes OBVIOUSLY, the bell housings are different. What i need to know is where can i find a bellhousing to bolt this thing to that will mate behind a SBC. (heheh i said mate and behind in the same sentence.)
