Transmissions and DrivetrainNeed help with your trans? Problems with your axle?
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
I have a bad vibration, especially at 50 mph. It started as a litle vibration and now it's pretty bad over time. So far I've replaced...........
1. ALL bushings, front and rear with energy suspension
2. Rear axles, bearings and seals
3. Rotors, bearings and seals
4. Had driveshaft balanced and new U-joints
5. New wheels and tires
6. New shocks and struts
7. All front steering components. Centerlink, pitman arm, tie rod, etc.
I was wondering if it might be a bushing or bearing that the shaft coming out of the rear of the transmission might be bad. I pulled my driveshaft out of my 88 I-ROC and wiggled the shaft and noticed that it's not as loose as the one in my 91 with the vibrations. Has anyone had an issue like this before? When I drive down the road, the vibrations make my passenger seat shake back and fourth.
This ad is not displayed to registered members. Register your free account today and become a member on ThirdGen!
Sponsored Links
Registered users do not see this ad. Click here to register for free!
