THIS IS CRAZY NEED ALITTLE HELP
#1
Junior Member
Thread Starter
Join Date: Dec 2000
Location: Fort Payne Al
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
THIS IS CRAZY NEED ALITTLE HELP
OK,Im new here and I need some help with the T56 tranny.I was wondering if it will fit the same as a powerglide (same bolt pattern).Now heres the crazy part and why I was needing to know.I have a 1999 Mitusbishi Eclipse turbo pushing 500 crank HP and the trannies in those things arent worth a sh*t.Bushur racing sells an adapter plate for my car that works with a power glide.What Im doing is taking my motor out turning it longways,putting a 9in rear under it and bolting the T56 up to my motor IF the bolt pattern is the same.Any help would be GREATLY welcomed thanks.
#2
Junior Member
Join Date: Jul 1999
Location: Tampa, Fl, USA
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
If you are serious, the powerglid and T56 have the same bolt pattern. all smallblocks do. the only problem is bolting it up to the flexplate. seems like a lot of domestic work in an import car goodluck man, though many may flame ya Its nice to see american influence in jap cars rather then vice-versa
mike
mike
#3
Junior Member
Thread Starter
Join Date: Dec 2000
Location: Fort Payne Al
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Thats ok if they flame me.....they will just be flaming one of there own.Im a die hard chevy man I own a 68 rrss.Just be cause I have a import does mean I dont also like american muscle.Thanks for the 411 on the tranny.
Thread
Thread Starter
Forum
Replies
Last Post
Pac J
Tech / General Engine
3
05-17-2020 10:44 AM