Transmissions and DrivetrainNeed help with your trans? Problems with your axle?
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
I have a B and M pro shifter and a rebuilt 700R4. A friend of mine mentioned the shifter was way to hard to move through R/N/and the rest of the forward gears. He thought the cable was bound up or had been heated by exhaust and the cable was shot. I disconnected the cable from the transmission and the shifter moves freely. Is there an adjustment to make on the tranmssion for the gear selection? I went to the track on saturday night and it was the first time the car had been driven except off and on a trailer and when in D the car did not have 1st gear. When I manually shifted it the car left hard but I overreved the engine because moving the shifter was way too hard. The owner of the transmission shop went through a divorce and moved away so I am on my own I guess.
Any help is greatly appreciated.
Thanks, Steve
This ad is not displayed to registered members. Register your free account today and become a member on ThirdGen!
Sponsored Links
Registered users do not see this ad. Click here to register for free!
