Go Back   Third Generation F-Body Message Boards > Tech Boards > Transmissions and Drivetrain
Sign in using an external account
Register Forgot Password?

Transmissions and Drivetrain Need help with your trans? Problems with your axle?

Welcome to ThirdGen.org!
Welcome to ThirdGen.org.

You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!


Reply
 
Thread Tools Search this Thread
Old 07-08-2009, 03:57 PM   #1
Junior Member
 
Join Date: Nov 2008
Posts: 11

Classifieds Rating: (0)
4th Gen Rear End.

Im wanting to put a 4th generation rear end in my 91 Firebird. I know that it will bolt right in and will be wider. But i was wondering what gears they came with, and are all of the 4th gen rear ends posi. I plan on pulling it out of a car in a junkyard, but i wanna make sure i get the right year, and whether i should pull it out of a v6 or v8 depending on what gear i want. any info would be appreciated.
caseworker2 is offline vBGarage Page   Reply With Quote
Old 07-08-2009, 05:02 PM   #2
Junior Member
 
Join Date: Jan 2008
Location: Upstate SC
Posts: 50
Car: 98 Camaro, 89 Camaro RS
Engine: 3.8l & 2.8l V6
Transmission: 4l60e & T5
Axle/Gears: Open 3.08 & lsd 3.42

Classifieds Rating: (1)
Re: 4th Gen Rear End.

Alot of v6s came with open 3.08s in the auto, not sure about the manual(maybe 3.23), but they were all open. All v8s came with lsd, some had 2.73s and some had 3.42s.
keith_AE2010 is offline vBGarage Page   Reply With Quote
Old 07-08-2009, 06:15 PM   #3
Junior Member
 
Join Date: Nov 2008
Posts: 11

Classifieds Rating: (0)
Re: 4th Gen Rear End.

so all the v8 4th gens do have lsd? is there anyway to tell what gear is in it...like by year or anything. obviouslt it would be different for auto and manual. i want a 3.42 but i want it to be in already. but more importantly i want to limited slip
caseworker2 is offline vBGarage Page   Reply With Quote
Old 07-09-2009, 08:11 AM   #4
Junior Member
 
Join Date: Jan 2008
Location: Upstate SC
Posts: 50
Car: 98 Camaro, 89 Camaro RS
Engine: 3.8l & 2.8l V6
Transmission: 4l60e & T5
Axle/Gears: Open 3.08 & lsd 3.42

Classifieds Rating: (1)
Re: 4th Gen Rear End.

Just look for a ls1 with m6. It will have posi and 3.42s. Also, if they tranny is missing, look for the door codes on the drivers side door. I think it should have gu6 for 3.42s and g80 for lsd. Not positive, do a search on a v8 board for that, but its the easiest way to tell if you think the rear was left stock.
keith_AE2010 is offline vBGarage Page   Reply With Quote
Old 07-09-2009, 08:26 AM   #5
Supreme Member
 
3rdgenmaro's Avatar
 
Join Date: Dec 2004
Location: Lincolnton, NC
Posts: 1,045
Car: 88 IROC
Engine: 97 5.7 Vortec LT4 hotcam
Transmission: 700 r4
Axle/Gears: 3.73

Classifieds Rating: (7)
Re: 4th Gen Rear End.

Quote:
Originally Posted by keith_AE2010 View Post
Alot of v6s came with open 3.08s in the auto, not sure about the manual(maybe 3.23), but they were all open. All v8s came with lsd, some had 2.73s and some had 3.42s.
and some LT1 cars had 3.23.
3rdgenmaro is offline vBGarage Page   Reply With Quote
Old 08-10-2009, 04:39 PM   #6
Junior Member
 
Join Date: Oct 2008
Location: GO COLTS!!
Posts: 18
Car: 91 Z28
Engine: LB9
Transmission: 5-Speed
Axle/Gears: 10-Bolt 3:42 Posi

Classifieds Rating: (1)
Re: 4th Gen Rear End.

Quote:
Originally Posted by caseworker2 View Post
so all the v8 4th gens do have lsd? is there anyway to tell what gear is in it...like by year or anything. obviouslt it would be different for auto and manual. i want a 3.42 but i want it to be in already. but more importantly i want to limited slip
Call your local GM parts dept. and give them the last 8 digits of the vin# and they can tell you exactly what it has, providing its the original rear.
daytonayellaz is offline vBGarage Page   Reply With Quote
Old 08-10-2009, 05:50 PM   #7
Senior Member
 
Chris Etemadi's Avatar
 
Join Date: Oct 1999
Location: Tulsa, Oklahoma
Posts: 470
Car: 1991 Z28
Engine: 355 6" rod w/ Dart Pro1 215cc & HSR
Transmission: 700r4
Axle/Gears: 3.73 10 bolt

Classifieds Rating: (0)
Send a message via AIM to Chris Etemadi
Re: 4th Gen Rear End.

My knowledge of the 4th gen rears is as follows:
93 6 speed - 2.73
94-02 6 speed 3.42
V6 cars - 3.08
LT/LS A4 cars without "1" on shifter plate - 2.73
LT/LS A4 cars with "1" on shifter plate - 3.23

This makes it easy when looking through salvage yard cars.
Hope this helps.
__________________

Black 91 Z28 12.43@113 1.73 60ft
355-HSR-58mmHolley-Dart pro1 215cc-234/238 Cammotion bumpstick-JE pistons-6" rods-Hooker 2210's
A Shift Above stageV trans-Neal Chance 9.5 3400stall
All Tubular up front-All Spohn out back-Z06 binders & rollers-4th gen dash-Moates Ostrich-Free Mods...
Chris Etemadi is offline vBGarage Page   Reply With Quote
Old 08-14-2009, 09:18 PM   #8
Member
 
Join Date: Apr 2009
Location: SE Houston
Posts: 244
Car: 1990 Camaro ZRS
Engine: 350 SBC
Transmission: 700R4
Axle/Gears: 3.42

Classifieds Rating: (0)
Re: 4th Gen Rear End.

so are all fourth gen rear ends lsd?

thanx
antsZRS is offline vBGarage Page   Reply With Quote
Old 08-15-2009, 09:35 PM   #9
Supreme Member
 
Join Date: Sep 2002
Location: Cary, North Carolina
Posts: 9,181
Car: 1992 RS
Engine: Carbed 350
Transmission: 700R4
Axle/Gears: 3.42 posi

Classifieds Rating: (0)
Send a message via AIM to camaronewbie
Re: 4th Gen Rear End.

Same as with any other rear end - only way to know 100% for sure is to pull the diff cover off and look - the gear ratis will be stamped in the ring/pinion, and you'll be able to verify the lsd upon sight.
__________________
1992 25th Anniversary RS T-Top
350 Carb 10:1 Dometops Mild Cam
Hedmann Headers Hi-Flo Cat/Aerochamber Muffler
700R4 B&M Shift Kit LS1 Disc Rear w/3.42 Posi
Poly Bushings Eibach Prokit Bilstein Shocks/Struts
HOK Candy Teal on Silver Flake IROC Hood
camaronewbie is offline vBGarage Page   Reply With Quote
Old 08-15-2009, 09:35 PM
ThirdGen
1992 Camaro




Paid Advertisement


Reply

Go Back   Third Generation F-Body Message Boards > Tech Boards > Transmissions and Drivetrain

Tags
3, 38, 3rd, 42, 4th, camaro, camarov6, diff, end, fbodys, gear, gen, posi, rear, rearend, v8
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

 


1982 Camaro '82 || 1983 Camaro '83 || 1984 Camaro '84 || 1985 Camaro '85 || 1986 Camaro '86 || 1987 Camaro '87 || 1988 Camaro '88 || 1989 Camaro '89 || 1990 Camaro '90 || 1991 Camaro '91 || 1992 Camaro '92


All times are GMT -5. The time now is 06:57 PM.


Powered by vBulletin® Version 3.7.5
Copyright ©2000 - 2012, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.5.2
All content copyright © 1997 - 2012 ThirdGen.org. All rights reserved. No part of this website may be reproduced without the expressed, documented, and written consent of ThirdGen.org's Administrators.

Emails & Contact Details