Transmissions and DrivetrainNeed help with your trans? Problems with your axle?
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
HELP I NEED SPEEDO GEAR HOUSING FOR 45TOOTH GEAR!!
I need a speedo housing/aluminum that will fit a 45 tooth speedo gear. The black plastic one will only work wiith up to a 39 tooth gear since the 40-45 tooth gear is a bit wider on the shaft. I have looked everywhere i could here in my area and noone has one. PLEASE help.The dealer says its no longer available. I can but a new one for 70.00. on the tranny site online. used would be more sufficient for me I HAVE PAYPAL!!!
__________________ 1986 Camaro Iroc-Z 350 TPI Corvette motor 700r4 trans, BMR strut tower brace,BMR adj.Panhard Rod,Energy Sway Bar links,Eibach Pro Kit,J&M street lower control arms,Accel Distributer,wires.Blacked out all lights.5% Limo tint all the way around.
Re: HELP I NEED SPEEDO GEAR HOUSING FOR 45TOOTH GEAR!!
there were black plastic ones for 40-45 tooth when I bought some years back. Prob. have one.
__________________ 86 SS, lotsa mods If you need a PN in a hurry so you can order it and wait 10 days for it to get there instead of buying it locally, you're not in that big of a hurry.
Re: HELP I NEED SPEEDO GEAR HOUSING FOR 45TOOTH GEAR!!
Have you tried installing the regular one? I saw everywhere that a larger housing was required, but I ignored it when I swapped my gears, and it fit just fine.
Re: HELP I NEED SPEEDO GEAR HOUSING FOR 45TOOTH GEAR!!
Quote:
Originally Posted by Atilla the Fun
for under $25 you can buy a new 45 tooth that comes with a new plastic carrier. this is detailed on one of my stickies.
Ive looked eveywhere and they arent 25.00. They are 60 amd 70 dollars. send me a link and ill buy it in a heartbeat. Thank you.
__________________ 1986 Camaro Iroc-Z 350 TPI Corvette motor 700r4 trans, BMR strut tower brace,BMR adj.Panhard Rod,Energy Sway Bar links,Eibach Pro Kit,J&M street lower control arms,Accel Distributer,wires.Blacked out all lights.5% Limo tint all the way around.
Re: HELP I NEED SPEEDO GEAR HOUSING FOR 45TOOTH GEAR!!
Quote:
Originally Posted by camaronewbie
Have you tried installing the regular one? I saw everywhere that a larger housing was required, but I ignored it when I swapped my gears, and it fit just fine.
Yup tried it and it will not fit thank you.
__________________ 1986 Camaro Iroc-Z 350 TPI Corvette motor 700r4 trans, BMR strut tower brace,BMR adj.Panhard Rod,Energy Sway Bar links,Eibach Pro Kit,J&M street lower control arms,Accel Distributer,wires.Blacked out all lights.5% Limo tint all the way around.
Re: HELP I NEED SPEEDO GEAR HOUSING FOR 45TOOTH GEAR!!
Quote:
Originally Posted by jmd
there were black plastic ones for 40-45 tooth when I bought some years back. Prob. have one.
pm sent
__________________ 1986 Camaro Iroc-Z 350 TPI Corvette motor 700r4 trans, BMR strut tower brace,BMR adj.Panhard Rod,Energy Sway Bar links,Eibach Pro Kit,J&M street lower control arms,Accel Distributer,wires.Blacked out all lights.5% Limo tint all the way around.
