Transmissions and DrivetrainNeed help with your trans? Problems with your axle?
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
The TA bushing is the same and so is the Trans mount, but the Torque arm mount is different. You may know this though. The bushing in the torque arm mount will fit in either the auto or manual TA mounts, though, so you can reuse that part.
ok, i looked at things last night and that does appear to be the case so i just need to
remove the rubber again like i did when i put the poly torque arm mount on the t5... the t5 bracket looks very similar to the t56 piece i wonder if they are the same? maybe save myself the trouble of the rubber removal again?
also torque spec for pressure plate bolts? i found a site that says 52lbs?
__________________ 84 Base Model Firebird
357ci approx 10.25-1 Vortec heads, Comp xe274, RPM AirGap, Holley 750 vac sec, MSD Pro Billet, Hedman Lt w/Custom Y pipe. 3in catback. T56, 10 bolt 3.73 Posi, Iroc Springs, ES Poly bushings, Cragar Soft 8's wearing 225/60/15 and 245/60/15, Speedhut Revolution Guages
