Transmissions and DrivetrainNeed help with your trans? Problems with your axle?
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
I have a 82 firebird with a 200c in it. I was wondering what length tailshaft i would need. I know i need the shorter one but was wondering what the correct length would be since i was told the 9" was to big.
ty very much. that helps alot i saw one on craigslist that was a 9in so ill make sure not to get that one. TY for your reply its very well appreciated im scrambling right now to find what i would need for the swap.
To use the driveshaft that came with your 200c, you want a short 6" tailshaft TH350. If you want to use a driveshaft found on third gens with a 700R4, you want a long 9" tailshaft TH350.
__________________
Hardtail Racing
All engine, no power adders! Bests: 9.029@150.45 (at altitude)
Theoretical sea level performance 8.623@157.05
