Transmissions and DrivetrainNeed help with your trans? Problems with your axle?
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
I just got an aluminum driveshaft for my 89 out of a 2001 Camaro I believe, when I replace the u-joints do I use the u-joints for a 2001 Camaro or the u-joints for an 89 Camaro with an aluminum driveshaft. Thanks.
The aluminum driveshaft uses a different u-joint than the steel driveshaft. If the aluminum driveshaft came with the tranny slip yoke then there's no problem at that end. You'll probably need a conversion u-joint to attach the driveshaft to the diff or a different yoke on the diff.
__________________
Hardtail Racing
All engine, no power adders! Bests: 9.029@150.45 (at altitude)
Theoretical sea level performance 8.623@157.05
Does anyone that has done the conversion have some part numbers for me? If it makes a difference I'm putting in a rear-end out of a 2000 Camaro at the same time. Thanks.
