Transmissions and DrivetrainNeed help with your trans? Problems with your axle?
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
Anyone know if the stock starter used with 700r4 will work with a T5?
I notice most of the parts places differentiate between manual and auto trans and have a different part number for the starter for each, but that does not always mean anything.
Both the flywheel & flexplate have 153 teeth and the same OD. I was able to get the starter in place, but it was a much tighter fit on the T5 and you can not visually check the allignment with the starter in place.
Couldn't find anything in the stickies or through search and wanted to get some input before I drop the engine in and find out I have to pull the starter back off, so any help woiuld be greatly appreciated!
If I recall from my old parts guy days, 87 and after 700r4's and t-5's shared the same starter but I could be mistaken. I know 86 and earlier are different but I could swear the newer ones were the same.
