Transmissions and DrivetrainNeed help with your trans? Problems with your axle?
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
i'm looking at a 9" with tq arm and crossmember for a t5, im not keen on the idea of fabing a new crosmember and was hoping i could do a simple mod to the t5 one... hmm
well the t5 torque arm is the same as the t56 one. so you wouldn't need to make a new crossmember. Is the 9 inch setup to accept a torque arm?? if not then you'll have to adapt it.
__________________ "Wide open 'till you see GOD, then brake!!"
'91 Camaro RS B4C Police Special Service Package
350 4-bolt, 10:0 w/moly rings, Holley Stealth Ram (ported), BBK 58mm, MSD ignition, Procomp heads 2.02 1.60 200cc (63hrs. port work), 30# venom injectors, Flowtech headers, full custom 3.5" mandrell ceramic exhaust w/ aerochamber, Comp cam XFI280HR (.576/.571 234/244), PCMforLESS.com tune, 58mm BBK, Custom TPI air lid, Custom RamAir, 1.6 stainless steel rollers, Custom 700-r4 2500 stall, Aluminum Drive line, 3.23 posi, Moser axles w/stud girdle cover, Spring works springs (lowered), UMI relocation brackets, panhard, LCAs, sub-frame connector, boxed A-arms, Poly bushings, Custom interior, Powdercoated & polished IROC wheels, Custom "Black Cherry" Paint", 4pt. roll bar, +++ more! "It's not the tires squealing, it the asphault SCREAMING!!"
oh, yeah you would....I've seen people modify factory t5 crossmembers for t56, so you could modifly that one to probably....they dont sell one for a t56??
__________________ "Wide open 'till you see GOD, then brake!!"
'91 Camaro RS B4C Police Special Service Package
350 4-bolt, 10:0 w/moly rings, Holley Stealth Ram (ported), BBK 58mm, MSD ignition, Procomp heads 2.02 1.60 200cc (63hrs. port work), 30# venom injectors, Flowtech headers, full custom 3.5" mandrell ceramic exhaust w/ aerochamber, Comp cam XFI280HR (.576/.571 234/244), PCMforLESS.com tune, 58mm BBK, Custom TPI air lid, Custom RamAir, 1.6 stainless steel rollers, Custom 700-r4 2500 stall, Aluminum Drive line, 3.23 posi, Moser axles w/stud girdle cover, Spring works springs (lowered), UMI relocation brackets, panhard, LCAs, sub-frame connector, boxed A-arms, Poly bushings, Custom interior, Powdercoated & polished IROC wheels, Custom "Black Cherry" Paint", 4pt. roll bar, +++ more! "It's not the tires squealing, it the asphault SCREAMING!!"
"It's not the tires squealing, it the asphault SCREAMING!!" 
