Stock Servo Removal and Replacement
#1
Member
Thread Starter
Join Date: Jan 2011
Location: Guelph, ON
Posts: 188
Likes: 0
Received 1 Like
on
1 Post
Car: 1984 Chevrolet Camaro z28
Engine: 383 sbc
Transmission: 700r4
Axle/Gears: Stock...this is next
Stock Servo Removal and Replacement
Hey guys, I'm hung up on something here. I'm in the middle of removing my stock 2-4 piston in my 700r4, and I can't get the 2nd piston out. I've removed the cover, and the first plate that comes out easily. Then, I removed the E-clip at the end of the pin, and the washer and spring. So, now I'm looking at the pin (which is easily depressed) and the rest of the assembly. But it doesn't want to move at all. It spins a bit, but there's no motion of the assembly to leave the tranny. Am I missing something?
#2
Member
Thread Starter
Join Date: Jan 2011
Location: Guelph, ON
Posts: 188
Likes: 0
Received 1 Like
on
1 Post
Car: 1984 Chevrolet Camaro z28
Engine: 383 sbc
Transmission: 700r4
Axle/Gears: Stock...this is next
Re: Stock Servo Removal and Replacement
Never mind boys, got 'er figured. Just took a bit more muscle than I expected.
#3
Supreme Member
Re: Stock Servo Removal and Replacement
84 if you have any pictures of your project post them on here.
#4
Member
Thread Starter
Join Date: Jan 2011
Location: Guelph, ON
Posts: 188
Likes: 0
Received 1 Like
on
1 Post
Car: 1984 Chevrolet Camaro z28
Engine: 383 sbc
Transmission: 700r4
Axle/Gears: Stock...this is next
Re: Stock Servo Removal and Replacement
I will, I have lots. So I've got one more hang up with this servo replacement, the cover is a real pain to get back in and secured with the retaining ring. I know it's possible, might need a friend to hold the cover in while I put the ring on. Not enough hands to do everything!
Thread
Thread Starter
Forum
Replies
Last Post
NBrehm
Engine/Drivetrain/Suspension Parts for Sale
1
08-25-2015 11:49 PM