Srt 10 t56 need help
#1
Member
Thread Starter
Join Date: Nov 2006
Location: buffalo ny
Posts: 155
Likes: 0
Received 1 Like
on
1 Post
Car: 86 iroc
Engine: Iron 408 LS3 combo
Transmission: Ram10 T56
Axle/Gears: 3.73 10 bolt :)
Srt 10 t56 need help
Has anybody used the srt 10 ram Trans in our cars? I've figured out everything on the front ... Bell housing input ect.. I am unsure about the tailshaft, I am having a custom driveshaft built so the output shaft spline and all that dosnt concern me. Just need to know how the tailshaft clears and shifter, and if I can get away with the hawks long tube crossmember I already have... Also the torque arm dosnt concern me either.. Thank you any help is appreciated
#2
Member
Thread Starter
Join Date: Nov 2006
Location: buffalo ny
Posts: 155
Likes: 0
Received 1 Like
on
1 Post
Car: 86 iroc
Engine: Iron 408 LS3 combo
Transmission: Ram10 T56
Axle/Gears: 3.73 10 bolt :)
Re: Srt 10 t56 need help
And the speedo, I'm doing a lsx stand alone harness and I have an Autometer speedo but still not sure how to adapt that
Thread
Thread Starter
Forum
Replies
Last Post
bigjay89gta
Engine/Drivetrain/Suspension Parts for Sale
12
10-15-2015 08:04 AM