TPI throttle linkage correct for 2004R/700r4

Reply Subscribe

Thread Tools

Search this Thread

08-29-2014, 07:09 AM

ToolGuru

Junior Member

Thread Starter

Join Date: Jun 2013

Location: 40 miles N of Detroit

Posts: 81

Likes: 0

Received 6 Likes on 5 Posts

Car: 1969 Camaro SS

Engine: 355, roller, Profilers, FIRST tpi

Transmission: 200r4

Axle/Gears: 3.42

TPI throttle linkage correct for 2004R/700r4

Does the stock throttle linkage on a TPI Camaro has the correct arc and "pull" for proper TV cable operation on the above transmissions or is an adapter needed like using one of those transmissions with a non-QJet carb?
Thanks

Reply Like

08-29-2014, 06:46 PM

jmd

Supreme Member

iTrader: (4)

Join Date: Jul 2000

Location: Aridzona

Posts: 6,287

Likes: 32

Received 40 Likes on 39 Posts

Car: `86 SS / `87 SS

Engine: L69 w/ TPI on top / 305 4bbl

Transmission: `95 T56 \ `88 200-4R

Re: TPI throttle linkage correct for 2004R/700r4

The TPI TV cables in the F-bodies and Corvette were matched to the 700-R4. So it's absolutely correct.

The 200-4R uses the same TV cable "pull" distance and cable housing fitment as the 700-R4.

Use the TPI cable with a TPI throttle body, the TBI cable with the TBI throttle body and the Q-jet cable with the Q-jet.

Reply Like

08-30-2014, 09:53 AM

ToolGuru

Junior Member

Thread Starter

Join Date: Jun 2013

Location: 40 miles N of Detroit

Posts: 81

Likes: 0

Received 6 Likes on 5 Posts

Car: 1969 Camaro SS

Engine: 355, roller, Profilers, FIRST tpi

Transmission: 200r4

Axle/Gears: 3.42

Re: TPI throttle linkage correct for 2004R/700r4

Quote:

Originally Posted by jmd

Thanks, bud. I thought they were the same but just wanted to verify. 69 Camaro with a transplanted 200-4R soon to get a modified TPI. Pretty sure everything would play nice with each other. Thanks again.

Last edited by ToolGuru; 08-30-2014 at 12:12 PM.

Reply Like