look here for new intakes ( aka the pizza box ) - Third Generation F-Body Message Boards

project89 · 10-22-2009, 08:44 PM

ok guys i knwo i said these wouldnt be available for a month or so.but since some ppl showed alot of interest.im contacted somone to get these built for me.and i can keep the same low price

, infact depending on how many ppl would liek on i can prolly get the price down

so post up if ur interested and let me know if u would like one,ill be working out the detials with the shop over the next day or 2

if u havent seen it yet this is the intake

u will have to supply ur own upper intake manifold so that the tb elbow can be cutoff and used on the new intake

i also need to know if ur interested in a forced induction or n/a version

This ad is not displayed to registered members.
Register your free account today and become a member on ThirdGen!

project89 · 10-22-2009, 08:45 PM

more pics

project89 · 10-22-2009, 08:46 PM

few more on car sprry for crappy cellphone pics

btw these will come in bare aluminum finish

2_point8_boy · 10-22-2009, 09:39 PM

Project89: I am going to lock this thread, but I am also going to make it a sticky. I just don't want this thread to get out of control with people asking dumb questions...which you know will happen. Let me know if there is anything you want to add and I can unlock it for you.

Everyone Else: Please use PM if you are interested in this intake from him. If there is any new information or answers to good questions about it, i will allow them to be posted by Project89 only. This is in the interest of getting everyone good information quickly, instead of having to search through 100+ posts on how much power it makes or what the current price is.

Thank You.

project89 · 10-24-2009, 04:37 PM

ok guys

first up im almost finalized on these with the shop,if i cant get the flanges and supply them intakes will be selling for 275-300 bucks with 1-2 in on a buy.if we can go over 3+ intakes we could be looking at 250-275$'s each thats a full 100 bucks off of what i can do them myself for

im waiting to hear back about the flanges, and i also have to get the drawings faxed over to the shop for a final price quote. i will update in a day or so with final pricing

and now

Quote:

, what else do I need to get? And where would I get them to complete the whole conversion from our stock intakes to the pizza box intake.
Thanks man.

upper manifold gasket, tb gacket, 10 bolts @ about .59 cents each, and a package of washers.

other then that its pretty much a bolt on deal

remove the ac compressor support backet, unbolt the throttle body and egr tube then remove the upper plenum and replace with the new one.
bolt back on the tb and hose/egr line and ur done

and here are some cut away pics of the stocker plenum for comparasion