v6 tuner pro help
03-02-2012, 06:52 PM
#1
Junior Member
Thread Starter
Join Date: Feb 2010
Location: upstate ny
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 camaro rs
Engine: built 3.1
Transmission: built 700r4
Axle/Gears: 3.73
v6 tuner pro help
i have a 92 rs with 7730 azty ecm and a cable i purchased from aldlcable.com, i have checked comports and so on and from looks of it every thing should be running but... it doesnt lol so ant help would be nice just wanna log data for now but even do that!!!
help please! lol
help please! lol 
03-02-2012, 07:51 PM
#3
Supreme Member
iTrader: (2)
Join Date: Mar 2011
Location: Northwest Ohio
Posts: 6,273
Likes: 0
Received 23 Likes
on
18 Posts
Car: 1991 Camaro RS
Engine: BBC 509 Merlin ii 9.6:1 pump gas
Transmission: ATI pro th350 sfi case. TSI 5500 st
Axle/Gears: Strange S60 4:10s
Re: v6 tuner pro help
Heres the Stock Bin, ADF, and ADX if you dont have them. ADX is for tunerpro version 5
All the files are in the zip folder.
All the files are in the zip folder.
Last edited by fasteddi; 03-02-2012 at 08:26 PM.
03-02-2012, 08:33 PM
#4
Junior Member
Thread Starter
Join Date: Feb 2010
Location: upstate ny
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 camaro rs
Engine: built 3.1
Transmission: built 700r4
Axle/Gears: 3.73
Re: v6 tuner pro help
okay i did not have the right adx which im sure didnt help lol now i just cant get the program to bring up and live data
03-02-2012, 08:41 PM
#5
Supreme Member
iTrader: (2)
Join Date: Mar 2011
Location: Northwest Ohio
Posts: 6,273
Likes: 0
Received 23 Likes
on
18 Posts
Car: 1991 Camaro RS
Engine: BBC 509 Merlin ii 9.6:1 pump gas
Transmission: ATI pro th350 sfi case. TSI 5500 st
Axle/Gears: Strange S60 4:10s
Re: v6 tuner pro help
Is it tunerproRT V5??
When you start, make sure you have the cable connected to the car and the car ignition off. Or just connect the cable to the laptop, it doesnt need to be connected to the car. Do this before you open the tunerpro program up.
Then go to the TOOLS tab, go to the bottom and click PREFRENCES, then click the far right tab that says DATA ACQ/EMULATION, then click the CONFIGURE PLUG IN COMPONET then look at the com ports and swich if needed to so that when you click the TEST FOR VALID USER INTERFACE USER SETTINGS, that is shows the cable is properly working.
Do that first to make sure the com ports are right and the cable is connected to tunerpro....
When you start, make sure you have the cable connected to the car and the car ignition off. Or just connect the cable to the laptop, it doesnt need to be connected to the car. Do this before you open the tunerpro program up.
Then go to the TOOLS tab, go to the bottom and click PREFRENCES, then click the far right tab that says DATA ACQ/EMULATION, then click the CONFIGURE PLUG IN COMPONET then look at the com ports and swich if needed to so that when you click the TEST FOR VALID USER INTERFACE USER SETTINGS, that is shows the cable is properly working.
Do that first to make sure the com ports are right and the cable is connected to tunerpro....
03-02-2012, 08:58 PM
#6
Junior Member
Thread Starter
Join Date: Feb 2010
Location: upstate ny
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 camaro rs
Engine: built 3.1
Transmission: built 700r4
Axle/Gears: 3.73
Re: v6 tuner pro help
if i do it that way it will not recognize the cable is plugged in .... haha why cant stuff be simple?
Trending Topics
03-02-2012, 09:48 PM
#8
Junior Member
Thread Starter
Join Date: Feb 2010
Location: upstate ny
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 camaro rs
Engine: built 3.1
Transmission: built 700r4
Axle/Gears: 3.73
Re: v6 tuner pro help
Alright man thank you for all the help I will take a look in the morning and post with results
Thread
Thread Starter
Forum
Replies
Last Post
