| |||||||
| Welcome to ThirdGen.org! |
 | | Welcome to ThirdGen.org. You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today! |
| Blue1989RS's 1989 Chevy Camaro | |||
| Suspension Front: Boxed A-Arms Ceramic Pads Stock brakes Stock Steering Homemade Wonderbar 32mm Sway Poly everywhere Hardware store 3/8" endlinks KYB shocks IROC 600in/lb springs Suspension Rear: Boxed LCA Boxed Panhard LCA Relocators "Premium Pads" 11.5" disk Aluminum PBR calipers Poly everywhere Hardware Store 3/8" endlinks 4.11 ratio rear, gear spacer 2 series Auburn limited slip Stock 26 spline axles 175in/lb progressive springs stock bilsteins Brakes 94 master cylinder wilwood prop valve, no stock prop stock lines stock front 10.5" stock 11.5" 4th gen rear rotors Wheels 16x8" crosslaces 245/45r16, tread 160 Engine 3.1L crank in a 2.8 block bored 1.25mm (.060") balanced crank 0.430" lift cam @ 1.5:1, 108* sep, 206 duration Ported polished gasket matched intake unshrowed valves 17lb/hr injectors 91 non-cold start injector fuel rail MSD coil Autolite Platinum Plugs 91 Speed Density conversion Custom Chip Chassis Full trim 3100, now weights 2930lbs removed rear crash bumper gutted steel hood 4 hood pins, no hinges hood latch assy removed non-ac heater box 4th gen seats, no rears gutted carpet H4 headlight conversion |
| ||
| Powered by: vBGarage by magnus, trigunflame | |||
| Author | Comment | Date |
