Wheels and TiresNeed help with wheels or tires? Got fitment issues? Have questions about tire performance and handling? Ask all of those questions here!
Sponsored by Tire Rack
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
I have a 83 Z28 with no fenter well mods. I have used the seach funcion with not much luck. The rims that I have are off of a fourth gen camaro with a 6 in backspacing and are 9 in wide. Please help with the front and rear tire selecton. I want to put on Nitto NT05 tires on all four corners. Thanks for any help that you can give me.
Last edited by Anthonys434; 05-14-2009 at 11:29 PM.
Reason: aditional info
i would stay between 255-275/ 40 any less sidewall and the car will skid accross road imperfections. you could also run a 35 series tire but it would ride horrible and look out of place
i currently have 18 X 9.5" wheels, 265 40 18 on the front and 275 40 18 on the rear, the car sits at about 26- 26.25" all the way around no rubbing, no wheel well gap
__________________ THE MODS Suspension: 18X9.5" hyper black c6 wheels with 265/40/18, 275/40/18 michelin PS2, AGR 12.7 to 1 steering box .225 valve, J&M strut mounts KONI Yellow sport/ Ground Control Weight Jacks#1,000/200, double adjustable lower control arms+ UMI LCA relocation brackets, UMI Panhard relocation "chassis side" with single adjustable UMI panhard, JEGS Panhard relocation "axle side". UMI SFC's. UMI tunnel mounted torque arm, 36/ 23 mm swaybars, Iroc wonderbar, Edelbrock 3 pt STB, Moog front end steering componets, Spohn bumpsteer kit. Intake: Ultimate T.B. + spacer, 14 X 3" open element 1.6 Comp Cams Roller rockers Exhaust: 1 5/8" Edelbrock shorty headers through 3" Flowmaster, carsound 3" converter.
I had 295/35/18 on all 4 corners with 18x10.5 tt2 rims on my stock 89 Camaro vert. Only had a slight rub when I turned the front wheel all the way to lock. Adam :-)