z06 speedlines need spacers?
07-01-2010, 11:02 PM
#1
Junior Member
Thread Starter
Join Date: May 2004
Location: modesto, cali
Posts: 81
Likes: 0
Received 1 Like
on
1 Post
Car: 2001 Camaro SS
Engine: no engine yet :)
Transmission: T-56 with z06 drive gears
Axle/Gears: most likely 12 bolt or 9" with 3.91
z06 speedlines need spacers?
these are the rims on my 2000 SS
i'm either picking up a 87 Z28 this saturday or i'm pickin up a 89 IROC and i want to throw these on since my SS has no engine right now, might as well use the wheels right? fronts are 265/40/17 and rears are 295/35/18. my question is will i need spacers for a stock height car or will i need spacers and what size if someone knows.
John
i'm either picking up a 87 Z28 this saturday or i'm pickin up a 89 IROC and i want to throw these on since my SS has no engine right now, might as well use the wheels right? fronts are 265/40/17 and rears are 295/35/18. my question is will i need spacers for a stock height car or will i need spacers and what size if someone knows.
John
07-02-2010, 02:07 AM
#3
Junior Member
Thread Starter
Join Date: May 2004
Location: modesto, cali
Posts: 81
Likes: 0
Received 1 Like
on
1 Post
Car: 2001 Camaro SS
Engine: no engine yet :)
Transmission: T-56 with z06 drive gears
Axle/Gears: most likely 12 bolt or 9" with 3.91
Re: z06 speedlines need spacers?
i'll post up pics when i get these on, i might just get the adapters so i don't run the risk of breakin the studs
07-02-2010, 12:19 PM
#4
Junior Member
Thread Starter
Join Date: May 2004
Location: modesto, cali
Posts: 81
Likes: 0
Received 1 Like
on
1 Post
Car: 2001 Camaro SS
Engine: no engine yet :)
Transmission: T-56 with z06 drive gears
Axle/Gears: most likely 12 bolt or 9" with 3.91
Re: z06 speedlines need spacers?
which do most run though the slip on spacers or the bolt on adapters?
07-02-2010, 01:23 PM
#5
Banned
iTrader: (12)
Join Date: Jul 1999
Location: Bertram (outside Austin), TX
Posts: 12,212
Likes: 0
Received 10 Likes
on
10 Posts
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi
Re: z06 speedlines need spacers?
Bolt on ones are required. Your wheel studs are not long enough for the adapters to fit, nor would they be as safe.
But personally? I don't like even the bolt on adapters. There are safety reasons that some sanctioning bodies do not allow adapters of any kind in their racing.
But personally? I don't like even the bolt on adapters. There are safety reasons that some sanctioning bodies do not allow adapters of any kind in their racing.
07-02-2010, 02:05 PM
#6
Junior Member
Thread Starter
Join Date: May 2004
Location: modesto, cali
Posts: 81
Likes: 0
Received 1 Like
on
1 Post
Car: 2001 Camaro SS
Engine: no engine yet :)
Transmission: T-56 with z06 drive gears
Axle/Gears: most likely 12 bolt or 9" with 3.91
Re: z06 speedlines need spacers?
thankfully it wouldn't be for racing, just for normal driving
Trending Topics
07-02-2010, 03:18 PM
#8
Thread
Thread Starter
Forum
Replies
Last Post
