Attention all 9Bolt Owners! And board sponsors. - Third Generation F-Body Message Boards


Aftermarket Product Review Provide questions and answers about aftermarket parts for the Third Generation F-Body.

Attention all 9Bolt Owners! And board sponsors.

Reply
 
Thread Tools Search this Thread
Old 12-12-2003, 03:12 PM   #1
Senior Member
Thread Starter
iTrader: (10)
 
Join Date: Jul 1999
Location: Chesapeake, Ohio
Posts: 782
Car: 02 WS6 White/Ebony
Engine: LS1
Transmission: T56
Axle/Gears: Stock 3.42


Attention all 9Bolt Owners! And board sponsors.

Like many of you, I want a support cover/girdle for my 9bolt Borg-Warner rear and I'm tired of waiting on Miles at 9bolt.com. It is evident to me by my numerous email conversations with him and the length of time this has been going on that he has other priorities besides this.

I have spoke to Dave at TA Performance about this. They are a very reputable company and they make the best ones on the market and for several applications. Most of the ones sold by reputable vendors are made by TA (including Ford Racing/SVO). The others are just cheaper imitiations copied from them.

Dave said they have considered making one but have only had a few inquiries about them, so haven't. I have explained that there is considerable interest in this and asked them what it would take to get one made for our application.
He said that if I got at least 20 people lined up that it could start the ball rolling on it and that the more people interested....the more likely and quicker it could happen.

Their covers sell direct for $159 and the stud kit's which replace the bolts sell for $19.95; however, Dave didn't know an exact price yet.

Ours should be similar in price. He didn't know an exact price because there is no number yet of how many will be made, but common sense tells me that the first run would probably cost slightly higher than what the others are listed. That is an assumption so don't take it for gospel. I'm certain that it would NOT be more than $200 each to have them made.

What I need is for everyone who is willing and able to buy one to respond here so we can decide if this is a go.

If you are unable to buy in right now, but will be soon, please make a note of that in your response because you may be a player in this by the time they would have them ready.
However, please do not respond if you are not serious, or are not going to be able to buy one. That only makes me look like a jerk and hurts my credibility in their eyes. And I am serious about this whole thing, so I don't want any monkey-wrenches thrown into the plans. I don't want this to be like the carbon fiber hood attempt, or some other efforts which come to mind.
Either you're serious, or you aren't.

I am in talks with a sponsor who is looking into this and if he gets involved, we will do this as a group purchase. If that doesn't work out and I am not able to find one interested in getting involved with this I will see if we can direct pay TA Performance individually, since they are a reputable company and that would prospective buyers more at ease.

I've posted this on some other sites with links to this post, but please try to spred the word. The more people, the cheaper the price and the quicker they produce them.

UPDATE:
So far we have:

Definates-
1) Myself
2) 87F383
3) transambill
4) Bitchincamaro
5) Midnightrider
6) formularpm
7) 89warbird
8) racer350
9) 89formula383
10) thegreatJ
11) Jed
12) Redbird87
13) Mkos1980
14) formul8!!
15) cwalsh
17) 89gta383 (2 covers)
18) borgx
19) mcbchild
20) jrg77
21) rdnk 4re
22) jr86-ta
23) 1989GTATransAm
24) 88 WS6 TransAm GTA
25) Dave Jones
26) Parrydise7
27) Dr G
29) jcstta (2 covers)
30) roadracinGTA
31) 355ss
32) TPIgirl
33) doc
34) SLP_GTA
35) FAST LiFE
36) mike graycar
37) conlinj
38) Tom Keliher
39) ski89z28
40) holov1
41) Gus_Mahn
42) Maroon_IROC_Z
43) firedawg225
44) Jetmeck
45) L98FORM89
46) fireturd350
47) 91rslt1
48) LimaBravoNiner
49) rangelec
50) Karps TA
51) Flyersman29
52) HatchetJack
53) mean5.7
54) Jstcrzyengh
55) Kontrax
56) IROCTintZ28
57) luv2xlr8
59) ballisticv6 (2 covers)
60) "snowball"
61) 89Kicker_Iroc-Z
62) gcore_45
63) NJITIROC

Probablys-
1) SweetRide45
2) xpndbl3
3) SLP IROC-Z
4) 87350tpi
5) Dyno Don
6) 90iroc5spd
7) mongoose
8) primo
9) HotRod
10) Kevin91Z

Kudos to mike graycar, he is shipping TA a donor rear.
Now we need the cost/time figures from TA Performance. Waiting on decision of involvement from possible vendor.

Sincere thanks,
Dwain "draino" Brammer

Last edited by drain89; 03-06-2004 at 01:50 PM.
drain89 is offline   Reply With Quote
Old 12-12-2003, 04:19 PM   #2
Junior Member
 
Join Date: Apr 2001
Location: Blacklick, Ohio, USA
Posts: 83
Car: '91 RS
Engine: 5.7 tbi
Transmission: 700r4

You've got my attention. Let me know where this goes!
gcore45 is offline   Reply With Quote
Old 12-12-2003, 04:30 PM   #3
Member
 
Join Date: Oct 2003
Location: Dallas TX
Posts: 202
Car: 87 Formula 350
Engine: LS1 in Progress
Transmission: T56
Axle/Gears: 3.70 9 bolt


I will purchase 1 from wherever has them available for purchase...I just want one.
87F383 is offline   Reply With Quote
Old 12-12-2003, 04:35 PM   #4
Supreme Member
iTrader: (5)
 
xpndbl3's Avatar
 
Join Date: Jan 2002
Location: Orland Park, IL
Posts: 13,618
Car: 1984 Z28
Engine: SLOW carbed ls
Transmission: TH400 with brake, 8" PTC converter
Axle/Gears: moser 9" 4.11


i will possibly have $$$ when it comes time to production, but until then i'll wait it out.
xpndbl3 is offline   Reply With Quote
Old 12-12-2003, 05:18 PM   #5
Junior Member
 
MIDNITERIDER's Avatar
 
Join Date: Jan 2003
Location: Welland.Ontario Canada
Posts: 97
Car: 1988 Formula 350
Engine: 350
Transmission: 700R
Axle/Gears: 9 Bolt...3:27


Im in on this one also!!!!!!!!!!!!!!!!!!!!E mail me as this gets closer.
MIDNITERIDER is offline   Reply With Quote
Old 12-12-2003, 05:42 PM   #6
Senior Member
Thread Starter
iTrader: (10)
 
Join Date: Jul 1999
Location: Chesapeake, Ohio
Posts: 782
Car: 02 WS6 White/Ebony
Engine: LS1
Transmission: T56
Axle/Gears: Stock 3.42


bump

Last edited by drain89; 12-15-2003 at 12:35 AM.
drain89 is offline   Reply With Quote
Old 12-12-2003, 05:56 PM   #7
Member
 
Join Date: Oct 2003
Location: Dallas TX
Posts: 202
Car: 87 Formula 350
Engine: LS1 in Progress
Transmission: T56
Axle/Gears: 3.70 9 bolt


Lemme send my friend a link...he will prolly throw his name on.
87F383 is offline   Reply With Quote
Old 12-12-2003, 06:01 PM   #8
Senior Member
Thread Starter
iTrader: (10)
 
Join Date: Jul 1999
Location: Chesapeake, Ohio
Posts: 782
Car: 02 WS6 White/Ebony
Engine: LS1
Transmission: T56
Axle/Gears: Stock 3.42


Thanks! And by all means, anybody who knows someobody who might be intersted....please spread the word.
drain89 is offline   Reply With Quote
Old 12-12-2003, 06:09 PM   #9
Senior Member
 
Join Date: Apr 2002
Location: Houston, Texas
Posts: 662
Car: 1989 GTA Nighthawk
Engine: 389 CID TPI
Transmission: TCI 700R4
Axle/Gears: 9 bolt 3.23


I'm in, definitely!
89Warbird is offline   Reply With Quote
Old 12-12-2003, 06:17 PM   #10
Member
 
Join Date: Jul 1999
Location: Long Island, NY
Posts: 101
Car: 1988 IROC-Z
Engine: 350
Transmission: 700r4
Axle/Gears: 3.45


put me in for one
Racer350 is offline   Reply With Quote
Old 12-12-2003, 06:32 PM   #11
Junior Member
 
Join Date: Nov 2003
Location: Carrollton, TX
Posts: 74
Car: '89 Formula
Engine: Low Output 3
Transmission: T-56

i am now setting aside money. said money will be for this. do not fail me.

put me on this list


ps, i am "the friend" :lala:
89formula383 is offline   Reply With Quote
Old 12-12-2003, 06:56 PM   #12
Senior Member
 
Join Date: Jun 2000
Location: Tuscaloosa, AL
Posts: 998
Car: 91Z, 91RS, '84 Jimmy
Engine: L98, 355, L98
Transmission: 700R, T56, 700R4

I'll be wanting one. Just let me know when payment comes due.
TheGreatJ is offline   Reply With Quote
Old 12-12-2003, 08:51 PM   #13
Jed
Member
 
Join Date: Jul 1999
Posts: 292
Car: 89 Formula 350
Engine: 360 / HSR
Transmission: T56
Axle/Gears: 3.27


I'll take one - I don't care where it comes from, as long as it is a quality product. The $$$ is no problem - add me to the list.

Thanks!!!!
Jed is offline   Reply With Quote
Old 12-12-2003, 09:33 PM   #14
Senior Member
Thread Starter
iTrader: (10)
 
Join Date: Jul 1999
Location: Chesapeake, Ohio
Posts: 782
Car: 02 WS6 White/Ebony
Engine: LS1
Transmission: T56
Axle/Gears: Stock 3.42


ttt

Last edited by drain89; 12-15-2003 at 12:36 AM.
drain89 is offline   Reply With Quote
Old 12-12-2003, 11:26 PM   #15
Member
 
Join Date: Sep 2002
Location: Atlanta,Ga.
Posts: 148
Engine: 355
Transmission: 700R4


Dwain, Please add me to the list for the nine-bolt cover. If necessary I will pay all or part up front if this will help make this happen. BTW , thank you for your time and effort trying to help us get this needed cover. I really appreciate it!!:hail: :hail: :hail: Dave,Redbird 87
Redbird87 is offline   Reply With Quote
Old 12-12-2003, 11:39 PM   #16
Senior Member
Thread Starter
iTrader: (10)
 
Join Date: Jul 1999
Location: Chesapeake, Ohio
Posts: 782
Car: 02 WS6 White/Ebony
Engine: LS1
Transmission: T56
Axle/Gears: Stock 3.42


Thanks Dave. No money is needed yet.
I'm trying to get a vendor involved in this that would:
1) Add volume to the order
2) Give us clout with TA performance- they'd take a business more seriously than a joe schmoe like me. Plus they have experience in getting things like this started, whereas this is my first go at this.
3) Allow us to send payment to-to get this done. I know alot of you would probably be more comfortable sending a reputable business the money instead of me. This could probably add alot of prospective people who want in but don't trust me.

If none of them will, then I'll tackle this by myself.

If we get enough people willing to go in, I'll contact them and get specifics and then well work out the money arrangement. When it gets to that point, I'd like to have a solid amount to tell you guys and make the payment arrangements something we all (or the majority) decide on.
I'm easy, I don't care how this is done, just that it gets done.
Thanks again.
Dwain "draino" Brammer
drain89 is offline   Reply With Quote
Old 12-13-2003, 12:01 AM   #17
Supreme Member
iTrader: (8)
 
Join Date: Jan 2000
Location: Macedonia ,OH
Posts: 3,968
Car: Formula
Engine: 6.0 LSX
Transmission: 4L60E
Axle/Gears: 9 Bolt 3:27


I'll take one..
Mkos1980 is offline   Reply With Quote
Old 12-13-2003, 01:15 AM   #18
Senior Member
 
Join Date: Feb 2003
Location: Glen Allen, VA
Posts: 5,740

I'll make this a sticky for you guys.
25THRSS is offline   Reply With Quote
Old 12-13-2003, 01:17 AM   #19
Senior Member
Thread Starter
iTrader: (10)
 
Join Date: Jul 1999
Location: Chesapeake, Ohio
Posts: 782
Car: 02 WS6 White/Ebony
Engine: LS1
Transmission: T56
Axle/Gears: Stock 3.42


Thanks bud!
drain89 is offline   Reply With Quote
Old 12-13-2003, 01:18 AM   #20
Senior Member
 
Join Date: Feb 2003
Location: Glen Allen, VA
Posts: 5,740

No problem. I hope it works out.
25THRSS is offline   Reply With Quote
Old 12-13-2003, 02:34 AM   #21
Senior Member
 
formul8!!'s Avatar
 
Join Date: Jan 2001
Location: www.thirdgentech.com
Posts: 1,609
Car: 2004 GTO
Engine: LS1
Transmission: T-56

Put me down as a definite.

Thanks for taking the initiative on getting the ball rolling on the cover for the 9bolt!
formul8!! is offline   Reply With Quote
Old 12-13-2003, 02:41 AM   #22
Senior Member
iTrader: (9)
 
cwalsh's Avatar
 
Join Date: Jun 2001
Location: O Fallon, MO
Posts: 341
Car: 2004 Corvette
Engine: LS1
Transmission: T56

I'm in for one!!! About D*** time too!
cwalsh is offline   Reply With Quote
Old 12-13-2003, 09:28 AM   #23
Supreme Member
 
Gumby's Avatar
 
Join Date: Oct 2001
Location: NWOhioToledoArea
Posts: 8,110
Car: 86-FireBird
Engine: -MPFI
Transmission: T5
Axle/Gears: 3:42


I just gotta say,

You can count on TA Performance to come through.
If people are willing to buy they are willing to provide the service.

I love them guys. sniff sniff
Gumby is offline   Reply With Quote
Old 12-13-2003, 10:54 AM   #24
TGO Supporter
iTrader: (5)
 
89gta383's Avatar
 
Join Date: Feb 2000
Location: St. Augustine, FL
Posts: 1,767
Car: 89 GTA
Engine: 383
Transmission: 700R4
Axle/Gears: 9 bolt-3.73


Put me down for 2, 1 for a friend.
89gta383 is offline   Reply With Quote
Old 12-13-2003, 02:17 PM   #25
Senior Member
iTrader: (2)
 
Join Date: Jun 2002
Location: Bergen County, NJ
Posts: 842
Car: 1989 IROC-Z
Engine: L98
Transmission: T-56


id be down for one if you can convince what the heck it will do for me.
lol, sorry. im not sure of the benefits of it. anyone care to explain?
but i am interested.
NJITIROC is offline   Reply With Quote
Old 12-13-2003, 02:55 PM   #26
Senior Member
 
formul8!!'s Avatar
 
Join Date: Jan 2001
Location: www.thirdgentech.com
Posts: 1,609
Car: 2004 GTO
Engine: LS1
Transmission: T-56

I pre-loads the caps that support the bearings for the axles and differential. It keeps them from trying to exit the rear through the diff cover.

When the pinion turns, the ring gear and differential will start to shift towards the rear and puts stress on the bolts holding the caps in.

This is what causes broken ring gear teeth and axle bearing failure.
formul8!! is offline   Reply With Quote
Old 12-13-2003, 03:57 PM   #27
Junior Member
iTrader: (4)
 
borgx's Avatar
 
Join Date: Oct 2001
Location: Ballwin, MO
Posts: 78
Car: 1987 Pontiac Trans Am GTA
Engine: 305
Transmission: WorldClass T5
Axle/Gears: 3.70


Put me down for one whenever they are available. Thanks and thanks to CWalsh for posting a link on team3rdgen.com as well!

Last edited by borgx; 12-13-2003 at 04:08 PM.
borgx is offline   Reply With Quote
Old 12-13-2003, 04:01 PM   #28
Senior Member
iTrader: (2)
 
Join Date: Jun 2002
Location: Bergen County, NJ
Posts: 842
Car: 1989 IROC-Z
Engine: L98
Transmission: T-56


Quote:
Originally posted by formul8!!
I pre-loads the caps that support the bearings for the axles and differential. It keeps them from trying to exit the rear through the diff cover.

When the pinion turns, the ring gear and differential will start to shift towards the rear and puts stress on the bolts holding the caps in.

This is what causes broken ring gear teeth and axle bearing failure.
so its ~$160 to keep my rear together...

im in assuming i can scrape together the cash.
NJITIROC is offline   Reply With Quote
Old 12-13-2003, 04:10 PM   #29
Senior Member
iTrader: (9)
 
cwalsh's Avatar
 
Join Date: Jun 2001
Location: O Fallon, MO
Posts: 341
Car: 2004 Corvette
Engine: LS1
Transmission: T56

I posted a link to this thread on the F-Body.org mailing list as well.
Chris
cwalsh is offline   Reply With Quote
Old 12-13-2003, 06:05 PM   #30
Senior Member
Thread Starter
iTrader: (10)
 
Join Date: Jul 1999
Location: Chesapeake, Ohio
Posts: 782
Car: 02 WS6 White/Ebony
Engine: LS1
Transmission: T56
Axle/Gears: Stock 3.42


Thanks Chris!
drain89 is offline   Reply With Quote
Old 12-13-2003, 10:35 PM   #31
Senior Member
Thread Starter
iTrader: (10)
 
Join Date: Jul 1999
Location: Chesapeake, Ohio
Posts: 782
Car: 02 WS6 White/Ebony
Engine: LS1
Transmission: T56
Axle/Gears: Stock 3.42


We only need 2 more and I can call Dave back and get this started. I know there's more people who'd like to have one.
drain89 is offline   Reply With Quote
Old 12-14-2003, 05:20 AM   #32
Member
iTrader: (1)
 
mcbchild's Avatar
 
Join Date: Nov 2003
Location: WI
Posts: 412
Car: 1984 Firebird SE
Engine: 388 sbc, Brodix Track 1s
Transmission: turbo 350 transmission
Axle/Gears: 4.10 gears


GIRDLES

Put me down for one also, I have a 9 bolt 4.10 from Miles at 9 bolt and can't get one from him either yet. If need to contact, [email protected]

Thanks
Attached Thumbnails
Attention all 9Bolt Owners!  And board sponsors.-pict0038.jpg  
mcbchild is offline   Reply With Quote
Old 12-14-2003, 06:56 AM   #33
Senior Member
 
Join Date: Nov 2003
Location: Gary, In USA
Posts: 586
Car: '85 Camaro
Engine: LG4 305
Transmission: T-5


I'll take one.
jrg77 is offline   Reply With Quote
Old 12-14-2003, 09:35 AM   #34
Senior Member
Thread Starter
iTrader: (10)
 
Join Date: Jul 1999
Location: Chesapeake, Ohio
Posts: 782
Car: 02 WS6 White/Ebony
Engine: LS1
Transmission: T56
Axle/Gears: Stock 3.42


We've got enough people that I can call Dave back Monday!

Last edited by drain89; 12-14-2003 at 01:44 PM.
drain89 is offline   Reply With Quote
Old 12-14-2003, 09:45 AM   #35
Junior Member
 
Join Date: Sep 2003
Location: Shiloh, NC
Posts: 20

Don't stop that list just yet, I just saw this thread on iroczone and jumped over. Put me down for 1!! shoot me an email [email protected] I don't scan the boards as much as I used too. I'd buy today if they had it ready.
RDNK 4RE is offline   Reply With Quote
Old 12-14-2003, 10:14 AM   #36
Senior Member
Thread Starter
iTrader: (10)
 
Join Date: Jul 1999
Location: Chesapeake, Ohio
Posts: 782
Car: 02 WS6 White/Ebony
Engine: LS1
Transmission: T56
Axle/Gears: Stock 3.42


If anybody knows Tom Keliher, please let him know about this...he was #1 on the list at 9bolt.com for one. He'd probably be interested in this.
drain89 is offline   Reply With Quote
Old 12-14-2003, 11:59 AM   #37
Senior Member
Thread Starter
iTrader: (10)
 
Join Date: Jul 1999
Location: Chesapeake, Ohio
Posts: 782
Car: 02 WS6 White/Ebony
Engine: LS1
Transmission: T56
Axle/Gears: Stock 3.42


I have a vendor/sponsor who is looking into this with me. I can't disclose who it is because nothing is certian. He is going to speak with Dave and see what he can get done. If he is a go in this....I will make the announcement when all details have been worked out.

Last edited by drain89; 12-14-2003 at 01:42 PM.
drain89 is offline   Reply With Quote
Old 12-14-2003, 12:41 PM   #38
Junior Member
 
Join Date: Feb 2003
Location: E-ville, IN
Posts: 97
Car: '86 Trans Am
Engine: 305 TPI
Transmission: 700R4

Put me down for one as well.
Thanks for all the hard work, as well.
JR86-TA is offline   Reply With Quote
Old 12-14-2003, 02:07 PM   #39
Supreme Member
iTrader: (3)
 
1989GTATransAm's Avatar
 
Join Date: Sep 2003
Location: Cypress, California
Posts: 6,856
Car: 1989 GTA
Engine: 369 TPI
Transmission: 4L60E
Axle/Gears: 3.70 Nine Bolt


Now that I know what it does and that is it helps to keep the rear end together, I will take one. I'am getting close to 300RWHP. Allen
1989GTATransAm is offline   Reply With Quote
Old 12-14-2003, 02:16 PM   #40
Senior Member
iTrader: (1)
 
Join Date: Mar 2001
Location: Cherry Hill, NJ
Posts: 2,181
Car: 92 Trans Am 'Vert
Engine: 305 TPI
Transmission: 5 Speed


Ok, Im definatley in for one initially. I will be ordering another one, but one will do for now. Thanks for the PM Drain!

Email me @ [email protected] when you have more details and need my personal info.
88 WS6 TransAm GTA is offline   Reply With Quote
Old 12-14-2003, 10:29 PM   #41
Member
 
Join Date: Apr 2002
Location: Alton IL
Posts: 157
Car: 87 aniv vert, 90 Iroc, 87 LT
Engine: LB9, LB9, carbed 305
Transmission: MM5, MM5 conversion, MM5 conversion
Axle/Gears: 3.45, 3.73, 3.73


sounds great, very interested. if this happens im 99% in
90iroc5spd is offline   Reply With Quote
Old 12-14-2003, 11:29 PM   #42
Supreme Member
iTrader: (1)
 
Join Date: Jul 2001
Location: South of Heaven, North of Hell
Posts: 1,285
Car: 1985 Camaro
Engine: .040" over 350
Transmission: T56
Axle/Gears: 9-bolt with 3.45s


If it isn't too late, I'm also in. Thanks.
Parrydise7 is offline   Reply With Quote
Old 12-15-2003, 04:59 PM   #43
Senior Member
Thread Starter
iTrader: (10)
 
Join Date: Jul 1999
Location: Chesapeake, Ohio
Posts: 782
Car: 02 WS6 White/Ebony
Engine: LS1
Transmission: T56
Axle/Gears: Stock 3.42


I spoke to Dave today. After hearing the amount of interest gathered on these in such a short time, he has decided that he is going to look into producing them. I told him that I'm looking at an initial order of 30 right now, but know of several others interested as well as a vendor and that it will probably go up to around 50 units. He is going to get us a price on 30, and a timeframe. He has some channels he has to go thru on this, so he is going to get back to me.

I advised him that I have a vendor that will be speaking with him and that if he gets involved, it will be turned over to him and done as a gp thru him. That should change things for the better if it happens. But I wanted to speak to Dave and work out an arrangement incase a vendor isn't part of this.

Well that's what I have so far, the ball is rolling, now just a waiting game of a final answer.
No use in me wasting anymore board space, I'll update as soon as I get definates!
Thanks again for your support folks!
drain89 is offline   Reply With Quote
Old 12-15-2003, 05:06 PM   #44
Member
 
Join Date: Sep 2002
Location: Atlanta,Ga.
Posts: 148
Engine: 355
Transmission: 700R4


9-bolt cover

Dwain, It is people like you who make this so enjoyable, (TGO), thank you doesn't seem like enough, But--------Thank You!!! !!! Dave, Home of the Phoenix, my red 87 Formie.
Redbird87 is offline   Reply With Quote
Old 12-15-2003, 05:12 PM   #45
Junior Member
 
Join Date: Nov 2003
Location: Carrollton, TX
Posts: 74
Car: '89 Formula
Engine: Low Output 3
Transmission: T-56

hehe, 'preciate all the work you are doing to get this going.

I don't even have a 9 bolt yet

but yes i am still in
89formula383 is offline   Reply With Quote
Old 12-15-2003, 05:15 PM   #46
Member
 
Join Date: Oct 2003
Location: Dallas TX
Posts: 202
Car: 87 Formula 350
Engine: LS1 in Progress
Transmission: T56
Axle/Gears: 3.70 9 bolt


A big thank you to all your effort on this 9-bolt cover on our behalf. It is very appreciated by all of us.

:hail: :hail: :hail: :hail: :hail: :hail:

-Aaron
87F383 is offline   Reply With Quote
Old 12-15-2003, 05:31 PM   #47
Senior Member
Thread Starter
iTrader: (10)
 
Join Date: Jul 1999
Location: Chesapeake, Ohio
Posts: 782
Car: 02 WS6 White/Ebony
Engine: LS1
Transmission: T56
Axle/Gears: Stock 3.42


No problem, gives me something to do to keep out of the wifes hair while I'm laid off.
drain89 is offline   Reply With Quote
Old 12-15-2003, 07:13 PM   #48
Junior Member
 
MIDNITERIDER's Avatar
 
Join Date: Jan 2003
Location: Welland.Ontario Canada
Posts: 97
Car: 1988 Formula 350
Engine: 350
Transmission: 700R
Axle/Gears: 9 Bolt...3:27


Great Job!!!!!!!We now have some positive vibs.....
MIDNITERIDER is offline   Reply With Quote
Old 12-16-2003, 02:13 PM   #49
Junior Member
 
Join Date: Nov 2000
Location: Sacramento, CA
Posts: 15

add 1 more to the list, I kept going back to 9bolt web site to see if I could place my order figured I would never be able to get one. Nice to think I might not have to buy a 12bolt or 9"
roadracinGTA is offline   Reply With Quote
Old 12-18-2003, 05:33 PM   #50
Member
iTrader: (1)
 
Join Date: Apr 2001
Location: Davenport,IA
Posts: 385
Car: 90 Camaro
Engine: 418 LS3
Transmission: MN6 w/ Street Twin
Axle/Gears: 3.27 9 bolt


I will take One for sure
355SS is offline   Reply With Quote
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
Wheel fitment help PAFORM350 Wheels and Tires 2 10-02-2015 08:21 PM
Car of the Month or Car of the Year in December? Linson Auto Detailing and Appearance 12 10-01-2015 10:50 PM
wanted 2 H/O air intake tubes zman1969 Engine/Drivetrain/Suspension Wanted 0 10-01-2015 12:09 PM
Engine compartment hole drumstixer Body 5 09-29-2015 04:02 PM
Water temp gauge still not working..... SS-EXPRESS Electronics 2 09-28-2015 10:14 AM


Go Back   Third Generation F-Body Message Boards >

Tags
10033593, 89, 9bolt, 9boltcom, aftermarket, alton, buying, crank, gm, illinois, iroc, looked, ls3, pulley, sale, trans

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Advertising
Featured Sponsors
Vendor Directory

1982 Camaro '82 || 1983 Camaro '83 || 1984 Camaro '84 || 1985 Camaro '85 || 1986 Camaro '86 || 1987 Camaro '87 || 1988 Camaro '88 || 1989 Camaro '89 || 1990 Camaro '90 || 1991 Camaro '91 || 1992 Camaro '92


All times are GMT -5. The time now is 02:08 PM.


All content copyright 1997 - 2014 ThirdGen.org. All rights reserved. No part of this website may be reproduced without the expressed, documented, and written consent of ThirdGen.org's Administrators. We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
 
  • Ask a Question
    Get answers from community experts
Question Title:
Description:
Your question will be posted in: