Double D-Mods (BUYER BEWARE..STAY AWAY!!)
#1
Supreme Member
Thread Starter
iTrader: (1)
Join Date: Jan 2000
Location: san jose, ca
Posts: 1,110
Likes: 0
Received 6 Likes
on
6 Posts
Car: 1990 IROC-Z (De-Badged-Carbon Hood)
Engine: Superram 383
Transmission: T-56 w/upgraded Viper Internals
Axle/Gears: 3.73 18x8 and 18x11 irocs
Double D-Mods (BUYER BEWARE..STAY AWAY!!)
It's been over two months and I have yet to receive my Double Din Radio mount. I have called several times and the chick that picks up says that they don't have the part in stock and they need to order it. Seriously...this is what you do for a living. Why the ****k would it take you two months to order a trim piece.
I told them how desperate I was to have the piece so that I could finish my stereo project so that my car would be featured in a magazine soon. That did not faze them. So finally, I received an email last week saying that my order had shipped. Knowing that this was an urgent order, they decided to ship my order via Fedex Ground (morons). I have yet to receive it.
Avoid these guys at all costs.
I told them how desperate I was to have the piece so that I could finish my stereo project so that my car would be featured in a magazine soon. That did not faze them. So finally, I received an email last week saying that my order had shipped. Knowing that this was an urgent order, they decided to ship my order via Fedex Ground (morons). I have yet to receive it.
Avoid these guys at all costs.
#2
Member
Join Date: Mar 2005
Location: Houston
Posts: 412
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 IROC-Z28 & 1987 GTA
Engine: 305 TPI & 350 TPI
Transmission: 700R4
Re: Double D-Mods (BUYER BEWARE..STAY AWAY!!)
Whoa!
I was going to get one of these for my ride too. After two months they should atleast knock 50% of the total cost off of it.....
I was going to get one of these for my ride too. After two months they should atleast knock 50% of the total cost off of it.....
#3
Junior Member
Join Date: Sep 2005
Location: south san francisco
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Car: 84 camaro z28
Engine: 305 H.O.
Transmission: 5 speed
Re: Double D-Mods (BUYER BEWARE..STAY AWAY!!)
wow, I was going to order one from them, now I really had to think about it.
#4
Supreme Member
iTrader: (25)
Join Date: Feb 2006
Location: Manteca,California. Nor Cal.
Posts: 7,260
Likes: 0
Received 5 Likes
on
5 Posts
Car: SOLD IT. Mopar guy only now.
Engine: gone
Transmission: gone
Axle/Gears: gone
Re: Double D-Mods (BUYER BEWARE..STAY AWAY!!)
Customer service just isn't what it used to be. It was your fault they were out of stock right? You ordered it! haha. They take your money and sit on it. Lame. Hope you get it worked out Tommy.
#5
Supreme Member
Join Date: Dec 2000
Location: stallings,n.c.
Posts: 1,271
Likes: 0
Received 1 Like
on
1 Post
Car: 1989 camaro rs convertable
Engine: 305 tbi
Transmission: 700r4
Axle/Gears: 7.5"3.42 gears forth gen 2000 camar
Re: Double D-Mods (BUYER BEWARE..STAY AWAY!!)
that sucks. i already had the radio picked out.maybe since they modify stock pieces maybe they are having trouble getting them.
#7
Member
Re: Double D-Mods (BUYER BEWARE..STAY AWAY!!)
I was tossing around the idea of just buying one, but if its like that I think I'll just try my hand at fabbing one out of aluminum or something. It won't look as stockish but it also won't take months to finish it!
Trending Topics
#9
Member
iTrader: (16)
Re: Double D-Mods (BUYER BEWARE..STAY AWAY!!)
Sorry IROC-Z but you gotta read the fine print. I've had that page for the double din bezel bookmarked for quite some time now (almost a year) and it has always said "Please allow up to 8 weeks for shipping as all orders are made by hand to order." That's two months to me, seems they've done just what they said.
#11
Supreme Member
Join Date: Feb 2004
Location: So Cal
Posts: 1,581
Likes: 0
Received 2 Likes
on
2 Posts
Car: 89 IROC Z28
Engine: 357 TPI
Transmission: 700R4
Axle/Gears: 3.42 Posi
Re: Double D-Mods (BUYER BEWARE..STAY AWAY!!)
I've talked to them on the phone and they said they somehow turn the stock faceplate into the double din replacement. The stock opening is ~ 1" wider than a double din opening and ~1" shorter, seems hard to do and he wouldn't say how it was possible (trade secret). Anyway they are the only game in town.
It's possible to shave the stock faceplate enough to fit a double din radio but you will need to glue or epoxy some plastic to fill the sides. My friend, a stereo installer and shop owner modded mine. It looked OK but no where as nice as Double Dins though.
It's possible to shave the stock faceplate enough to fit a double din radio but you will need to glue or epoxy some plastic to fill the sides. My friend, a stereo installer and shop owner modded mine. It looked OK but no where as nice as Double Dins though.
#12
Junior Member
Join Date: Sep 2005
Location: south san francisco
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Car: 84 camaro z28
Engine: 305 H.O.
Transmission: 5 speed
Re: Double D-Mods (BUYER BEWARE..STAY AWAY!!)
BTW, did you ever received your double din plate? and if so how did the install turn out?
#13
Member
Join Date: Apr 2013
Location: Dallas Tx
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Iroc Z28 Convertible
Engine: V8 5.0 305 TBI
Re: Double D-Mods (BUYER BEWARE..STAY AWAY!!)
I got mine last week. It took them about 8 weeks. I think this post is somewhat misleading. They admit on their site that it takes 6-8 weeks. Mine looks great I think.
#14
Junior Member
Join Date: Sep 2005
Location: south san francisco
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Car: 84 camaro z28
Engine: 305 H.O.
Transmission: 5 speed
#15
Senior Member
Re: Double D-Mods (BUYER BEWARE..STAY AWAY!!)
That is nice.
Is the grain on the cover different from the rest of the center console?
Is the grain on the cover different from the rest of the center console?
#17
Supreme Member
Thread Starter
iTrader: (1)
Join Date: Jan 2000
Location: san jose, ca
Posts: 1,110
Likes: 0
Received 6 Likes
on
6 Posts
Car: 1990 IROC-Z (De-Badged-Carbon Hood)
Engine: Superram 383
Transmission: T-56 w/upgraded Viper Internals
Axle/Gears: 3.73 18x8 and 18x11 irocs
Re: Double D-Mods (BUYER BEWARE..STAY AWAY!!)
eh....still kinda pissed at how long it took to get it, and they didn't even try to expedite the shipment. You would think that after calling all those times, and telling them how urgent I needed it, they would atleast send it USPS priority mail. It wouldn't cost them anymore...if anything at all.
Here is what the system looks like now.
Here is what the system looks like now.
#19
Supreme Member
Join Date: Feb 2004
Location: So Cal
Posts: 1,581
Likes: 0
Received 2 Likes
on
2 Posts
Car: 89 IROC Z28
Engine: 357 TPI
Transmission: 700R4
Axle/Gears: 3.42 Posi
Re: Double D-Mods (BUYER BEWARE..STAY AWAY!!)
No it's the same plastic as stock, the texture maybe slightly smoother than stock though.
As far as I can tell they put the original in a mold and heat it as press it to fit the new mold. just a guess.
As far as I can tell they put the original in a mold and heat it as press it to fit the new mold. just a guess.
#20
Supreme Member
iTrader: (15)
Join Date: Oct 2003
Location: Charlestown, IN
Posts: 3,449
Likes: 0
Received 4 Likes
on
4 Posts
Car: 1971 Camaro
Engine: 427
Transmission: TKO600
Axle/Gears: 3.73
Re: Double D-Mods (BUYER BEWARE..STAY AWAY!!)
If you look at mr iroz's pic, it sure looks like his console and stereo bezel is covered in a material.
I was asking in regards to his set up.
I was asking in regards to his set up.
#21
Supreme Member
Join Date: Feb 2004
Location: So Cal
Posts: 1,581
Likes: 0
Received 2 Likes
on
2 Posts
Car: 89 IROC Z28
Engine: 357 TPI
Transmission: 700R4
Axle/Gears: 3.42 Posi
Re: Double D-Mods (BUYER BEWARE..STAY AWAY!!)
If it's covered in something he did it himself because they don't come from doubledmods.com covered in anything. Just made of plastic. Maybe it was just a bad picture because even the ashtray looks like it's been covered with the same stuff.
#22
Junior Member
Join Date: May 2012
Location: Wisconsin
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2011 Dodge Durango R/T & 99 Vette
Engine: Hemi and LS1
Transmission: auto on both
Re: Double D-Mods (BUYER BEWARE..STAY AWAY!!)
as always we have working phones lines to talk times with everyone
Last edited by Double D Mods; 03-28-2015 at 03:54 PM.
#23
Junior Member
Join Date: May 2012
Location: Wisconsin
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2011 Dodge Durango R/T & 99 Vette
Engine: Hemi and LS1
Transmission: auto on both
Re: Double D-Mods (BUYER BEWARE..STAY AWAY!!)
It's been over two months and I have yet to receive my Double Din Radio mount. I have called several times and the chick that picks up says that they don't have the part in stock and they need to order it. Seriously...this is what you do for a living. Why the ****k would it take you two months to order a trim piece.
I told them how desperate I was to have the piece so that I could finish my stereo project so that my car would be featured in a magazine soon. That did not faze them. So finally, I received an email last week saying that my order had shipped. Knowing that this was an urgent order, they decided to ship my order via Fedex Ground (morons). I have yet to receive it.
Avoid these guys at all costs.
I told them how desperate I was to have the piece so that I could finish my stereo project so that my car would be featured in a magazine soon. That did not faze them. So finally, I received an email last week saying that my order had shipped. Knowing that this was an urgent order, they decided to ship my order via Fedex Ground (morons). I have yet to receive it.
Avoid these guys at all costs.
It takes two months simply because we have over 300 currently to make and can only make them so fast.
#24
Junior Member
Join Date: May 2012
Location: Wisconsin
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2011 Dodge Durango R/T & 99 Vette
Engine: Hemi and LS1
Transmission: auto on both
Re: Double D-Mods (BUYER BEWARE..STAY AWAY!!)
eh....still kinda pissed at how long it took to get it, and they didn't even try to expedite the shipment. You would think that after calling all those times, and telling them how urgent I needed it, they would atleast send it USPS priority mail. It wouldn't cost them anymore...if anything at all.
Here is what the system looks like now.
Here is what the system looks like now.
Fedex is usually 3 days to Almost anywhere we ship.
Fedex is daily pickup at our location.
USPS we have to leave and take 45 minutes out of the day to go drop off packages to be there same amount of time.
So it would not have made a difference priority or ground.
Wis to FL is 3days
Wis to CA is 4 days
#25
Junior Member
Join Date: May 2012
Location: Wisconsin
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2011 Dodge Durango R/T & 99 Vette
Engine: Hemi and LS1
Transmission: auto on both
Re: Double D-Mods (BUYER BEWARE..STAY AWAY!!)
NORMALLY we are 6-8 weeks.
However winter months are very different. Most cases a little longer as we get sent hundreds of bezels over the winter to make.
Thanks again
Dennis
#26
Supreme Member
Join Date: Nov 2004
Location: Connecticut
Posts: 1,344
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 IROC w/Danko bodykit, 1988 iroc vert, 1989 k1500 pickup 6" lift and 35" tires, 2002 chevy tahoe z71
Engine: 383 stealth ram, 305 tpi, 350 tbi, 5.3l
Transmission: T56, 700r4, 700r4, 4l460
Re: Double D-Mods (BUYER BEWARE..STAY AWAY!!)
I got mine just waiting for some free time to do the install
#27
Re: Double D-Mods (BUYER BEWARE..STAY AWAY!!)
We2l I'm having same issue. I ordered double din back on 12/20/15 its now 3/4/16.... i called them 2/18/16 asking about it. Guy said should be done and shipped out in a week. Sent email 2/29/16...no response. Ill be calling them this coming Monday to see whats going on. Been well over 8 weeks since my order.
#28
Supreme Member
iTrader: (1)
Join Date: Apr 2005
Location: Valdosta, GA
Posts: 1,165
Likes: 0
Received 1 Like
on
1 Post
Car: 1991 Trans Am GTA
Engine: L98(5.7 L TPI)
Transmission: 700r4(A4)
Axle/Gears: G80 RPO, 3:23s, Auburn Racer's Diff
Re: Double D-Mods (BUYER BEWARE..STAY AWAY!!)
Your original bezel is cut. Then a double din frame is inserted and epoxied/glued into place. The remaining holes (from the wider stock GM radios) are filled with epoxy/glue. Then, the frame is sprayed with texturizer/paint.
#30
Guest
Posts: n/a
#31
Guest
Posts: n/a
Re: Double D-Mods (BUYER BEWARE..STAY AWAY!!)
#33
Guest
Posts: n/a
Re: Double D-Mods (BUYER BEWARE..STAY AWAY!!)
Only about a million times and spoke to them. If you got 300 back ordered and 1 person making them. then that not really productive is it? Not only are they scam artist. They are not a man of their word. They are excuse makers. Ive got my claims Filed. Never got my stuff and its not surprising.
#34
Supreme Member
iTrader: (1)
Join Date: May 2015
Location: Temecula, CA
Posts: 1,149
Received 83 Likes
on
67 Posts
Car: 1989 Pontiac Formula 350
Engine: L98
Transmission: 700R4
Axle/Gears: BorgWarner 3.27 Posi
Re: Double D-Mods (BUYER BEWARE..STAY AWAY!!)
Only about a million times and spoke to them. If you got 300 back ordered and 1 person making them. then that not really productive is it? Not only are they scam artist. They are not a man of their word. They are excuse makers. Ive got my claims Filed. Never got my stuff and its not surprising.
I've seen their stuff installed on forums all over, so they actually do ship them out at some stage.
#35
Supreme Member
iTrader: (1)
Join Date: May 2015
Location: Temecula, CA
Posts: 1,149
Received 83 Likes
on
67 Posts
Car: 1989 Pontiac Formula 350
Engine: L98
Transmission: 700R4
Axle/Gears: BorgWarner 3.27 Posi
Re: Double D-Mods (BUYER BEWARE..STAY AWAY!!)
I've seen more than photos from their website.
They are not simply a scam.
You're just an upset customer. Oh no, get your refund and move on.
They are not simply a scam.
You're just an upset customer. Oh no, get your refund and move on.
#36
Supreme Member
iTrader: (3)
Re: Double D-Mods (BUYER BEWARE..STAY AWAY!!)
I'd you paid via PayPal the can assist in a refund based on your situation.
#37
Supreme Member
iTrader: (1)
Join Date: May 2015
Location: Temecula, CA
Posts: 1,149
Received 83 Likes
on
67 Posts
Car: 1989 Pontiac Formula 350
Engine: L98
Transmission: 700R4
Axle/Gears: BorgWarner 3.27 Posi
Re: Double D-Mods (BUYER BEWARE..STAY AWAY!!)
I have no relation to them, but I can't stand bitchy people and love to call them out on it.
#38
Supreme Member
iTrader: (3)
Re: Double D-Mods (BUYER BEWARE..STAY AWAY!!)
Years ago someone tried to take me for $250 on eBay. This long before they had a return policy favoring the buyer, if it's any better now...so I hounded the guy daily...i got my money back.
#39
Guest
Posts: n/a
Re: Double D-Mods (BUYER BEWARE..STAY AWAY!!)
I have one on order that's due this week. We will see but I am not concerned. Spoke with Dennis via email over a few weeks and he answered all my questions and made it clear I am looking at 2 months.
I'd you paid via PayPal the can assist in a refund based on your situation.
I'd you paid via PayPal the can assist in a refund based on your situation.
#40
Guest
Posts: n/a
Re: Double D-Mods (BUYER BEWARE..STAY AWAY!!)
In fairness he paid for something and has not received it. I can appreciate the frustration with this. Thing to do is go get your money back. I never let anyone get one over on me.
Years ago someone tried to take me for $250 on eBay. This long before they had a return policy favoring the buyer, if it's any better now...so I hounded the guy daily...i got my money back.
Years ago someone tried to take me for $250 on eBay. This long before they had a return policy favoring the buyer, if it's any better now...so I hounded the guy daily...i got my money back.
#41
Supreme Member
iTrader: (3)
Re: Double D-Mods (BUYER BEWARE..STAY AWAY!!)
oh trust me, they are on it. Im going to make a prediction for you now, after 8 weeks, all of a sudden, Hes not going to know $hit. Cant give you a date can tell where you are in line, NOTHING! Ive only spoke to him 3 times in 2 months. I have not bugged him. HE said 8 weeks, not me. now 8 weeks has come and gone and I know its all my fault. Just get him on the phone, it will be much more interesting.
I will give them the chance to fill my order because I appreciate small businesses and their efforts. If goes past end of Aug then I will do what I must.
When did you order yours?
#42
Guest
Posts: n/a
Re: Double D-Mods (BUYER BEWARE..STAY AWAY!!)
Well if that is the case I will get PayPal involved and go fab one myself. I just did one for my 1999 tj wrangler and very pleased I did it myself. Came out better then I had planned.
I will give them the chance to fill my order because I appreciate small businesses and their efforts. If goes past end of Aug then I will do what I must.
When did you order yours?
I will give them the chance to fill my order because I appreciate small businesses and their efforts. If goes past end of Aug then I will do what I must.
When did you order yours?
#43
Supreme Member
iTrader: (3)
Re: Double D-Mods (BUYER BEWARE..STAY AWAY!!)
I had fun doing my Jeep bezel but it takes time. They are made for jeeps by another company but I could not bring myself to spend 160 bucks. I paid about 70 to do mine only because I bought a spare bezel on ebay in case I messed up.
#44
Supreme Member
iTrader: (3)
Re: Double D-Mods (BUYER BEWARE..STAY AWAY!!)
Im not hounding anybody, hes not delivered on his word. Now im having to wait 10 days for him to refund it before PP takes it from him. whole time hes threatened me with refunding me, now that I want one. He dont want to give it. Just sit tight, your going to love what your about to go through.
In regards to Dennis I would not have laid down 100 bucks if I felt there would be any concerns. I am confident he will deliver the product for me in a timely manor. I researched everything I buy because it's my money and I just don't give it away. Only uncle Sam ro..i mean takes their cut if you will.
Last edited by Hawkeye1980; 08-09-2016 at 11:58 PM.
#46
Guest
Posts: n/a
Re: Double D-Mods (BUYER BEWARE..STAY AWAY!!)
Dennis is committing fraud at double d mods. Vettenuts is way better and faster. Dennis threatend me all the time with refunding my money. Well when i say just go ahead and do it then. He did not refund it. Im having to file a claim with my CC company. Never shipped me anything, never bugged him, Just riped me off. Its not over though. This guy picked the right person to rip off.
#47
Supreme Member
iTrader: (3)
Re: Double D-Mods (BUYER BEWARE..STAY AWAY!!)
Just heard from Dennis, mine in on the list to do this week and ship very soon. Fingers crossed!!! Very excited to get this done.
I will do a write up once its done but look at what I just did. See my radio is a Android I got off eBay, works great! It has wireless built in and 2 USB ports, one on the radio itself and the other a wire coming off the back. It will accept 3G dongle as well. So a while back I bought a front gauge bezel from an earlier bird. The idea was to incorporate the gain switch, which I had in my '86 bird. Anyway, I thought why not modify the blank and put 2 USB ports on it? One from the radio for power, interface, 3G an the other to direct power for charging. See what I did below!
I will do a write up once its done but look at what I just did. See my radio is a Android I got off eBay, works great! It has wireless built in and 2 USB ports, one on the radio itself and the other a wire coming off the back. It will accept 3G dongle as well. So a while back I bought a front gauge bezel from an earlier bird. The idea was to incorporate the gain switch, which I had in my '86 bird. Anyway, I thought why not modify the blank and put 2 USB ports on it? One from the radio for power, interface, 3G an the other to direct power for charging. See what I did below!
Last edited by Hawkeye1980; 08-13-2016 at 02:55 PM.
#48
Supreme Member
iTrader: (3)
Re: Double D-Mods (BUYER BEWARE..STAY AWAY!!)
So I got my face plate from Dennis last week and I am very happy. It was well done and looks great. I had to modify it a bit by widening the whole to accommodate the Android radio. Mainly because I couldn't get it flush in the modified radio pod, too many wires. It's ok and I love the look. Will put up pic when I have time.
I could have done this myself being i did the same for my Jeep but Dennis is a stand up guy answered all my questions and sells a solid product.
I could have done this myself being i did the same for my Jeep but Dennis is a stand up guy answered all my questions and sells a solid product.
#49
Supreme Member
iTrader: (6)
Join Date: Oct 2006
Location: West of Toronto
Posts: 3,041
Likes: 0
Received 6 Likes
on
6 Posts
Car: 89 IROC
Engine: 305 TPI / ZZ4 cam
Transmission: Stage 2 700R4, LS1 driveshaft
Axle/Gears: Strange 3.42 w/ Auburn
Re: Double D-Mods (BUYER BEWARE..STAY AWAY!!)
Sound mature advice.
Thread
Thread Starter
Forum
Replies
Last Post
skinny z
Engine/Drivetrain/Suspension Parts for Sale
5
10-05-2015 06:23 PM
Royal_Z
Engine/Drivetrain/Suspension Parts for Sale
4
09-30-2015 08:45 PM